History

Ryan 4791cfae1a Remove width, height and key_count from info.json (#14274 )		2021-09-12 14:04:56 +10:00
..
keymaps	Remove empty override functions (#14312 )	2021-09-05 21:36:31 +01:00
config.h
ergodone.c
ergodone.h	Remove more cruft in keyboard files (#14288 )	2021-09-03 17:09:30 +01:00
expander.c	ergodone - Refactor use of legacy i2c implementation (#14340 )	2021-09-07 16:33:29 +01:00
expander.h
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
matrix.c
readme.md	Update readme files (#14172 )	2021-08-26 16:53:24 +01:00
rules.mk	Remove bootloader listings from rules.mk (#14330 )	2021-09-10 13:35:46 +10:00

readme.md

ErgoDone

The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy.

Keyboard maintainer: Yu He
Hardware supported:
- ErgoDone v1.3 (tested)
Hardware availability:
- AliExpress
- KBDfans

Make example for this keyboard (after setting up your build environment):

make ktec/ergodone:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Flashing the firmware onto the keyboard

The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox.

To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard.
To flash the .hex file, use the hid_bootloader_cli utlity from the TKG Toolkit (as of 2017-10-03, only this old version works under Windows):
```
hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex
```