qmk-keychron-q3-colemak-dh/keyboards/terrazzo/config.h

130 lines
3.9 KiB
C

/* Copyright 2020 ademey "MsMustard"
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4d4d // MM
#define PRODUCT_ID 0x545a // TZ
#define DEVICE_VER 0x0002
#define MANUFACTURER MsMustard
#define PRODUCT Terrazzo
/* key matrix size */
// SWAP FOR PRO MICRO
// #define MATRIX_ROWS 8
#define MATRIX_ROWS 9
#define MATRIX_COLS 6
/* key matrix pins */
// SWAP FOR PRO MICRO
// #define MATRIX_ROW_PINS { D2, D7, E6, B4, B5, B6, B2, B3 }
#define MATRIX_ROW_PINS { D2, D7, E6, B4, B5, B6, B2, B3, F0 }
#define MATRIX_COL_PINS { D3, F4, F5, F6, F7, B1 }
#define UNUSED_PINS
#define DIODE_DIRECTION COL2ROW
/* ROTARY ENCODERS */
/* 4 encoder positions are supported. With multiple
encoder support when using the extra pins of
Elite-C controller.
Use the following configuration guides for your
encoder layout. */
/* PRO MICRO CONFIGURATIONS */
/* If using a Pro Micro, only 1 encoder may be used,
and only in the top or bottom position.
Top and bottom encoders share the same net,
so there is only one configuration. */
/* TOP or BOTTOM */
// #define ENCODERS_PAD_A { C6 }
// #define ENCODERS_PAD_B { D4 }
/* ELITE-C ONLY CONFIGURATIONS */
/* TOP 3
Default configuration */
#define ENCODERS_PAD_A { C6 , B7, C7 }
#define ENCODERS_PAD_B { D4 , D5, F1 }
/* BOTTOM 3 */
// #define ENCODERS_PAD_A { B7, C7, C6 }
// #define ENCODERS_PAD_B { D5, F1, D4 }
/* BOTTOM 2 */
// #define ENCODERS_PAD_A { C7, C6 }
// #define ENCODERS_PAD_B { F1, D4 }
#define ENCODER_RESOLUTION 2
#define BACKLIGHT_LEVELS 5
#ifdef LED_MATRIX_ENABLE
#define LED_DRIVER_ADDR_1 0x74
#define LED_DRIVER_COUNT 1
#define DRIVER_LED_TOTAL 105
#define LED_MATRIX_ROWS 15
#define LED_MATRIX_COLS 7
#define LED_MATRIX_MAXIMUM_BRIGHTNESS 20
#define LED_DISABLE_WHEN_USB_SUSPENDED
// LED Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_led_matrix?id=led-matrix-effects
// # define ENABLE_LED_MATRIX_ALPHAS_MODS
// # define ENABLE_LED_MATRIX_BREATHING
// # define ENABLE_LED_MATRIX_BAND
// # define ENABLE_LED_MATRIX_BAND_PINWHEEL
// # define ENABLE_LED_MATRIX_BAND_SPIRAL
// # define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT
// # define ENABLE_LED_MATRIX_CYCLE_UP_DOWN
// # define ENABLE_LED_MATRIX_CYCLE_OUT_IN
// # define ENABLE_LED_MATRIX_DUAL_BEACON
// # if defined(LED_MATRIX_KEYREACTIVE_ENABLED)
// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE
// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE
// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE
// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS
// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS
// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS
// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS
// # define ENABLE_LED_MATRIX_SPLASH
// # define ENABLE_LED_MATRIX_MULTISPLASH
// # endif
// # define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT
// # define ENABLE_LED_MATRIX_WAVE_UP_DOWN
#endif
/* Terrazzo animations */
// #define DISABLE_TERRAZZO_EFFECT_STRIPES
// #define DISABLE_TERRAZZO_EFFECT_DINO
// #define DISABLE_TERRAZZO_EFFECT_OUTRUN
#define DISABLE_TERRAZZO_EFFECT_PAC_DUDE
#define DISABLE_TERRAZZO_EFFECT_HEART
// #define DISABLE_TERRAZZO_EFFECT_WPM_CHART
#define DISABLE_TERRAZZO_EFFECT_DOT