History

Nick Brassel 7f805cc779 VIA Protocol 12 + fixes (#19916 ) Co-authored-by: Wilba <wilba@wilba.tech> Co-authored-by: zvecr <git@zvecr.com>		2023-02-23 09:19:00 +11:00
..
keymaps	VIA Protocol 12 + fixes (#19916 )	2023-02-23 09:19:00 +11:00
rev1	Move `SOFT_SERIAL_PIN` to data driven (#19863 )	2023-02-17 16:40:49 +11:00
rev2	Move `SOFT_SERIAL_PIN` to data driven (#19863 )	2023-02-17 16:40:49 +11:00
rev3	Move `SOFT_SERIAL_PIN` to data driven (#19863 )	2023-02-17 16:40:49 +11:00
info.json	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
levinson.c	Make Swap Hands use PROGMEM (#12284 )	2021-05-09 23:21:09 -07:00
levinson.h	Remove KEYMAP and LAYOUT_kc (#12160 )	2021-05-11 10:10:31 -07:00
readme.md	Update Levinson Readme to reflect changes to directory structure (#7883 )	2020-01-13 11:34:12 -05:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

Levinson

A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, Elite-C
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/levinson/rev3:default

Example of flashing this keyboard with Pro micro:

make keebio/levinson/rev3:default:avrdude

Example of flashing this keyboard with Elite-C:

You'll need to add BOOTLOADER = atmel-dfu to your rules.mk to ensure that resetting the board works properly.

Hold the reset button on the Elite-C board, or the reset button on the keyboard if already assembled, then release the button and run:

make keebio/levinson/rev3:default:dfu

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Levinson Build Guide