92 lines
2.7 KiB
Makefile
92 lines
2.7 KiB
Makefile
# project specific files
|
|
SRC = matrix.c \
|
|
led.c
|
|
|
|
## chip/board settings
|
|
# - the next two should match the directories in
|
|
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
# - For Teensies, FAMILY = KINETIS and SERIES is either
|
|
# KL2x (LC) or K20x (3.0,3.1,3.2).
|
|
# - For Infinity KB, SERIES = K20x
|
|
MCU_FAMILY = KINETIS
|
|
MCU_SERIES = K20x
|
|
|
|
# Linker script to use
|
|
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
# or <this_dir>/ld/
|
|
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
|
|
# - LDSCRIPT =
|
|
# - MKL26Z64 for Teensy LC
|
|
# - MK20DX128 for Teensy 3.0
|
|
# - MK20DX256 for Teensy 3.1 and 3.2
|
|
# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
|
|
# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
|
|
MCU_LDSCRIPT = MK20DX256BLDR8
|
|
|
|
# Startup code to use
|
|
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
# - STARTUP =
|
|
# - kl2x for Teensy LC
|
|
# - k20x5 for Teensy 3.0 and Infinity 60%
|
|
# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
|
|
MCU_STARTUP = k20x7
|
|
|
|
# Board: it should exist either in <chibios>/os/hal/boards/
|
|
# or <this_dir>/boards
|
|
# - BOARD =
|
|
# - PJRC_TEENSY_LC for Teensy LC
|
|
# - PJRC_TEENSY_3 for Teensy 3.0
|
|
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
|
|
# - MCHCK_K20 for Infinity KB
|
|
#BOARD = MCHCK_K20
|
|
BOARD = PJRC_TEENSY_3_1
|
|
|
|
# Cortex version
|
|
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
MCU = cortex-m4
|
|
|
|
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
|
|
ARMV = 7
|
|
|
|
# Vector table for application
|
|
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
|
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
|
OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
|
|
|
|
# Build Options
|
|
# comment out to disable the options.
|
|
#
|
|
|
|
DFU_ARGS = -d 1c11:b007
|
|
|
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
|
|
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
UNICODE_ENABLE = yes # Unicode
|
|
SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
|
|
|
|
CUSTOM_MATRIX = yes # Custom matrix file
|
|
SERIAL_LINK_ENABLE = yes
|
|
VISUALIZER_ENABLE = yes
|
|
LCD_ENABLE = yes
|
|
BACKLIGHT_ENABLE = yes
|
|
LCD_BACKLIGHT_ENABLE = yes
|
|
MIDI_ENABLE = no
|
|
RGBLIGHT_ENABLE = no
|
|
|
|
LCD_DRIVER = st7565
|
|
LCD_WIDTH = 128
|
|
LCD_HEIGHT = 32
|
|
|
|
LED_DRIVER = is31fl3731c
|
|
LED_WIDTH = 7
|
|
LED_HEIGHT = 7
|
|
|
|
LAYOUTS = ergodox
|