90 lines
3.8 KiB
C
Executable File
90 lines
3.8 KiB
C
Executable File
/*
|
|
* This software is experimental and a work in progress.
|
|
* Under no circumstances should these files be used in relation to any critical system(s).
|
|
* Use of these files is at your own risk.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
|
|
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
|
|
* PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
|
|
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
* DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and
|
|
* https://github.com/leaflabs/libmaple
|
|
*
|
|
* Modifications for QMK and STM32F303 by Yiancar
|
|
*/
|
|
|
|
// This file must be modified if the MCU is not defined below.
|
|
// This library also assumes that the pages are not used by the firmware.
|
|
|
|
#ifndef __EEPROM_H
|
|
#define __EEPROM_H
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "flash_stm32.h"
|
|
|
|
// HACK ALERT. This definition may not match your processor
|
|
// To Do. Work out correct value for EEPROM_PAGE_SIZE on the STM32F103CT6 etc
|
|
#define MCU_STM32F303CC
|
|
|
|
#ifndef EEPROM_PAGE_SIZE
|
|
#if defined (MCU_STM32F103RB)
|
|
#define EEPROM_PAGE_SIZE (uint16_t)0x400 /* Page size = 1KByte */
|
|
#elif defined (MCU_STM32F103ZE) || defined (MCU_STM32F103RE) || defined (MCU_STM32F103RD) || defined (MCU_STM32F303CC)
|
|
#define EEPROM_PAGE_SIZE (uint16_t)0x800 /* Page size = 2KByte */
|
|
#else
|
|
#error "No MCU type specified. Add something like -DMCU_STM32F103RB to your compiler arguments (probably in a Makefile)."
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef EEPROM_START_ADDRESS
|
|
#if defined (MCU_STM32F103RB)
|
|
#define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 128 * 1024 - 2 * EEPROM_PAGE_SIZE))
|
|
#elif defined (MCU_STM32F103ZE) || defined (MCU_STM32F103RE)
|
|
#define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 512 * 1024 - 2 * EEPROM_PAGE_SIZE))
|
|
#elif defined (MCU_STM32F103RD)
|
|
#define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 384 * 1024 - 2 * EEPROM_PAGE_SIZE))
|
|
#elif defined (MCU_STM32F303CC)
|
|
#define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE))
|
|
#else
|
|
#error "No MCU type specified. Add something like -DMCU_STM32F103RB to your compiler arguments (probably in a Makefile)."
|
|
#endif
|
|
#endif
|
|
|
|
/* Pages 0 and 1 base and end addresses */
|
|
#define EEPROM_PAGE0_BASE ((uint32_t)(EEPROM_START_ADDRESS + 0x000))
|
|
#define EEPROM_PAGE1_BASE ((uint32_t)(EEPROM_START_ADDRESS + EEPROM_PAGE_SIZE))
|
|
|
|
/* Page status definitions */
|
|
#define EEPROM_ERASED ((uint16_t)0xFFFF) /* PAGE is empty */
|
|
#define EEPROM_RECEIVE_DATA ((uint16_t)0xEEEE) /* PAGE is marked to receive data */
|
|
#define EEPROM_VALID_PAGE ((uint16_t)0x0000) /* PAGE containing valid data */
|
|
|
|
/* Page full define */
|
|
enum uint16_t
|
|
{
|
|
EEPROM_OK = ((uint16_t)0x0000),
|
|
EEPROM_OUT_SIZE = ((uint16_t)0x0081),
|
|
EEPROM_BAD_ADDRESS = ((uint16_t)0x0082),
|
|
EEPROM_BAD_FLASH = ((uint16_t)0x0083),
|
|
EEPROM_NOT_INIT = ((uint16_t)0x0084),
|
|
EEPROM_SAME_VALUE = ((uint16_t)0x0085),
|
|
EEPROM_NO_VALID_PAGE = ((uint16_t)0x00AB)
|
|
};
|
|
|
|
#define EEPROM_DEFAULT_DATA 0xFFFF
|
|
|
|
uint16_t EEPROM_init(void);
|
|
uint16_t EEPROM_format(void);
|
|
uint16_t EEPROM_erases(uint16_t *);
|
|
uint16_t EEPROM_read (uint16_t address, uint16_t *data);
|
|
uint16_t EEPROM_write(uint16_t address, uint16_t data);
|
|
uint16_t EEPROM_update(uint16_t address, uint16_t data);
|
|
uint16_t EEPROM_count(uint16_t *);
|
|
uint16_t EEPROM_maxcount(void);
|
|
|
|
#endif /* __EEPROM_H */
|