qmk-keychron-q3-colemak-dh/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
2016-07-07 12:45:34 +03:00

334 lines
9.8 KiB
C

/*
Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "gfx.h"
#if GFX_USE_GDISP
#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_ERGODOX
#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
#include "src/gdisp/gdisp_driver.h"
#include "board_IS31FL3731C.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
#ifndef GDISP_SCREEN_HEIGHT
#define GDISP_SCREEN_HEIGHT 9
#endif
#ifndef GDISP_SCREEN_WIDTH
#define GDISP_SCREEN_WIDTH 16
#endif
#ifndef GDISP_INITIAL_CONTRAST
#define GDISP_INITIAL_CONTRAST 0
#endif
#ifndef GDISP_INITIAL_BACKLIGHT
#define GDISP_INITIAL_BACKLIGHT 100
#endif
#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
#define IS31_ADDR_DEFAULT 0x74
#define IS31_REG_CONFIG 0x00
// bits in reg
#define IS31_REG_CONFIG_PICTUREMODE 0x00
#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
// D2:D0 bits are starting frame for autoplay mode
#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
#define IS31_REG_AUTOPLAYCTRL1 0x02
// D6:D4 number of loops (000=infty)
// D2:D0 number of frames to be used
#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
#define IS31_REG_DISPLAYOPT 0x05
#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
// D2:D0 bits blink period time (*0.27s)
#define IS31_REG_AUDIOSYNC 0x06
#define IS31_REG_AUDIOSYNC_ENABLE 0x1
#define IS31_REG_FRAMESTATE 0x07
#define IS31_REG_BREATHCTRL1 0x08
// D6:D4 fade out time (26ms*2^i)
// D2:D0 fade in time (26ms*2^i)
#define IS31_REG_BREATHCTRL2 0x09
#define IS31_REG_BREATHCTRL2_ENABLE 0x10
// D2:D0 extinguish time (3.5ms*2^i)
#define IS31_REG_SHUTDOWN 0x0A
#define IS31_REG_SHUTDOWN_OFF 0x0
#define IS31_REG_SHUTDOWN_ON 0x1
#define IS31_REG_AGCCTRL 0x0B
#define IS31_REG_ADCRATE 0x0C
#define IS31_COMMANDREGISTER 0xFD
#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine'
#define IS31_FUNCTIONREG_SIZE 0xD
#define IS31_FRAME_SIZE 0xB4
#define IS31_PWM_REG 0x24
#define IS31_PWM_SIZE 0x90
#define IS31_LED_MASK_SIZE 0x12
#define IS31_SCREEN_WIDTH 16
#define IS31
//Generated by http://jared.geek.nz/2013/feb/linear-led-pwm
const unsigned char cie[256] = {
0, 0, 0, 0, 0, 1, 1, 1, 1, 1,
1, 1, 1, 1, 2, 2, 2, 2, 2, 2,
2, 2, 2, 3, 3, 3, 3, 3, 3, 3,
3, 4, 4, 4, 4, 4, 4, 5, 5, 5,
5, 5, 6, 6, 6, 6, 6, 7, 7, 7,
7, 8, 8, 8, 8, 9, 9, 9, 10, 10,
10, 10, 11, 11, 11, 12, 12, 12, 13, 13,
13, 14, 14, 15, 15, 15, 16, 16, 17, 17,
17, 18, 18, 19, 19, 20, 20, 21, 21, 22,
22, 23, 23, 24, 24, 25, 25, 26, 26, 27,
28, 28, 29, 29, 30, 31, 31, 32, 32, 33,
34, 34, 35, 36, 37, 37, 38, 39, 39, 40,
41, 42, 43, 43, 44, 45, 46, 47, 47, 48,
49, 50, 51, 52, 53, 54, 54, 55, 56, 57,
58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
68, 70, 71, 72, 73, 74, 75, 76, 77, 79,
80, 81, 82, 83, 85, 86, 87, 88, 90, 91,
92, 94, 95, 96, 98, 99, 100, 102, 103, 105,
106, 108, 109, 110, 112, 113, 115, 116, 118, 120,
121, 123, 124, 126, 128, 129, 131, 132, 134, 136,
138, 139, 141, 143, 145, 146, 148, 150, 152, 154,
155, 157, 159, 161, 163, 165, 167, 169, 171, 173,
175, 177, 179, 181, 183, 185, 187, 189, 191, 193,
196, 198, 200, 202, 204, 207, 209, 211, 214, 216,
218, 220, 223, 225, 228, 230, 232, 235, 237, 240,
242, 245, 247, 250, 252, 255,
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
typedef struct{
uint8_t write_buffer_offset;
uint8_t write_buffer[IS31_FRAME_SIZE];
uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
uint8_t page;
}__attribute__((__packed__)) PrivData;
// Some common routines and macros
#define PRIV(g) ((PrivData*)g->priv)
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
uint8_t tx[2] __attribute__((aligned(2)));
tx[0] = IS31_COMMANDREGISTER;
tx[1] = page;
write_data(g, tx, 2);
}
static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
uint8_t tx[2] __attribute__((aligned(2)));
tx[0] = reg;
tx[1] = data;
write_page(g, page);
write_data(g, tx, 2);
}
static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
PRIV(g)->write_buffer_offset = offset;
write_page(g, page);
write_data(g, (uint8_t*)PRIV(g), length + 1);
}
LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
// The private area is the display surface.
g->priv = gfxAlloc(sizeof(PrivData));
__builtin_memset(PRIV(g), 0, sizeof(PrivData));
PRIV(g)->page = 0;
// Initialise the board interface
init_board(g);
gfxSleepMilliseconds(10);
// zero function page, all registers (assuming full_page is all zeroes)
write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
set_hardware_shutdown(g, false);
gfxSleepMilliseconds(10);
// software shutdown
write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
gfxSleepMilliseconds(10);
// zero function page, all registers
write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
gfxSleepMilliseconds(10);
// zero all LED registers on all 8 pages, and enable the mask
__builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
for(uint8_t i=0; i<8; i++) {
write_ram(g, i, 0, IS31_FRAME_SIZE);
gfxSleepMilliseconds(1);
}
// software shutdown disable (i.e. turn stuff on)
write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
gfxSleepMilliseconds(10);
// Finish Init
post_init_board(g);
/* Initialise the GDISP structure */
g->g.Width = GDISP_SCREEN_WIDTH;
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Orientation = GDISP_ROTATE_0;
g->g.Powermode = powerOn;
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
g->g.Contrast = GDISP_INITIAL_CONTRAST;
return TRUE;
}
#if GDISP_HARDWARE_FLUSH
LLDSPEC void gdisp_lld_flush(GDisplay *g) {
// Don't flush if we don't need it.
if (!(g->flags & GDISP_FLG_NEEDFLUSH))
return;
PRIV(g)->page++;
PRIV(g)->page %= 2;
// TODO: some smarter algorithm for this
// We should run only one physical page at a time
// This way we don't need to send so much data, and
// we could use slightly less memory
uint8_t* src = PRIV(g)->frame_buffer;
for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
PRIV(g)->write_buffer[get_led_address(g, x, y)]=cie[*src];
++src;
}
}
write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
gfxSleepMilliseconds(1);
write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
g->flags &= ~GDISP_FLG_NEEDFLUSH;
}
#endif
#if GDISP_HARDWARE_DRAWPIXEL
LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
coord_t x, y;
switch(g->g.Orientation) {
default:
case GDISP_ROTATE_0:
x = g->p.x;
y = g->p.y;
break;
case GDISP_ROTATE_180:
x = GDISP_SCREEN_WIDTH-1 - g->p.x;
y = g->p.y;
break;
}
PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
g->flags |= GDISP_FLG_NEEDFLUSH;
}
#endif
#if GDISP_HARDWARE_PIXELREAD
LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
coord_t x, y;
switch(g->g.Orientation) {
default:
case GDISP_ROTATE_0:
x = g->p.x;
y = g->p.y;
break;
case GDISP_ROTATE_180:
x = GDISP_SCREEN_WIDTH-1 - g->p.x;
y = g->p.y;
break;
}
return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
}
#endif
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
LLDSPEC void gdisp_lld_control(GDisplay *g) {
switch(g->p.x) {
case GDISP_CONTROL_POWER:
if (g->g.Powermode == (powermode_t)g->p.ptr)
return;
switch((powermode_t)g->p.ptr) {
case powerOff:
case powerSleep:
case powerDeepSleep:
write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
break;
case powerOn:
write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
break;
default:
return;
}
g->g.Powermode = (powermode_t)g->p.ptr;
return;
case GDISP_CONTROL_ORIENTATION:
if (g->g.Orientation == (orientation_t)g->p.ptr)
return;
switch((orientation_t)g->p.ptr) {
/* Rotation is handled by the drawing routines */
case GDISP_ROTATE_0:
case GDISP_ROTATE_180:
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Width = GDISP_SCREEN_WIDTH;
break;
case GDISP_ROTATE_90:
case GDISP_ROTATE_270:
g->g.Height = GDISP_SCREEN_WIDTH;
g->g.Width = GDISP_SCREEN_HEIGHT;
break;
default:
return;
}
g->g.Orientation = (orientation_t)g->p.ptr;
return;
case GDISP_CONTROL_CONTRAST:
return;
}
}
#endif // GDISP_NEED_CONTROL
#endif // GFX_USE_GDISP