4a5e68f4f2
MCU Pins for debugging, LED, boot tracing, and shift registers are now configurable at keyboard level. Macros led_* replaced by DBG_LED_* Macros m15_* replaced by DBG_1_* Macros m27_* replaced by DBG_2_* Macros m28_* replaced by DBG_3_* For CTRL and ALT keyboards, debug boot tracing pin default now set to pad M27 instead of M28 since although M28 is not being used, it is technically a signal for USB port detection. m15_print(...) renamed to dbg_print(...) to get away from hard coded port names. dbg_print function now follows similar pattern to debug led output.
71 lines
3.3 KiB
C
71 lines
3.3 KiB
C
/*
|
|
Copyright 2018 Massdrop Inc.
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef _SPI_H_
|
|
#define _SPI_H_
|
|
|
|
/* Macros for Shift Register control */
|
|
#define SR_EXP_RCLK_LO PORT->Group[SR_EXP_RCLK_PORT].OUTCLR.reg = (1 << SR_EXP_RCLK_PIN)
|
|
#define SR_EXP_RCLK_HI PORT->Group[SR_EXP_RCLK_PORT].OUTSET.reg = (1 << SR_EXP_RCLK_PIN)
|
|
#define SR_EXP_OE_N_ENA PORT->Group[SR_EXP_OE_N_PORT].OUTCLR.reg = (1 << SR_EXP_OE_N_PIN)
|
|
#define SR_EXP_OE_N_DIS PORT->Group[SR_EXP_OE_N_PORT].OUTSET.reg = (1 << SR_EXP_OE_N_PIN)
|
|
|
|
/* Determine bits to set for mux selection */
|
|
#if SR_EXP_DATAOUT_PIN % 2 == 0
|
|
#define SR_EXP_DATAOUT_MUX_SEL PMUXE
|
|
#else
|
|
#define SR_EXP_DATAOUT_MUX_SEL PMUXO
|
|
#endif
|
|
|
|
/* Determine bits to set for mux selection */
|
|
#if SR_EXP_SCLK_PIN % 2 == 0
|
|
#define SR_EXP_SCLK_MUX_SEL PMUXE
|
|
#else
|
|
#define SR_EXP_SCLK_MUX_SEL PMUXO
|
|
#endif
|
|
|
|
/* Data structure to define Shift Register output expander hardware */
|
|
/* This structure gets shifted into registers LSB first */
|
|
typedef union {
|
|
struct {
|
|
uint16_t RSVD4:1; /*!< bit: 0 */
|
|
uint16_t RSVD3:1; /*!< bit: 1 */
|
|
uint16_t RSVD2:1; /*!< bit: 2 */
|
|
uint16_t RSVD1:1; /*!< bit: 3 */
|
|
uint16_t SDB_N:1; /*!< bit: 4 SHUTDOWN THE CHIP WHEN 0, RUN WHEN 1 */
|
|
uint16_t IRST:1; /*!< bit: 5 RESET THE IS3733 I2C WHEN 1, RUN WHEN 0 */
|
|
uint16_t SRC_2:1; /*!< bit: 6 ADVERTISE A SOURCE TO USBC-2 CC */
|
|
uint16_t SRC_1:1; /*!< bit: 7 ADVERTISE A SOURCE TO USBC-1 CC */
|
|
uint16_t E_VBUS_2:1; /*!< bit: 8 ENABLE 5V OUT TO USBC-2 WHEN 1 */
|
|
uint16_t E_VBUS_1:1; /*!< bit: 9 ENABLE 5V OUT TO USBC-1 WHEN 1 */
|
|
uint16_t E_DN1_N:1; /*!< bit: 10 ENABLE DN1 1:2 MUX WHEN 0 */
|
|
uint16_t S_DN1:1; /*!< bit: 11 SELECT DN1 PATH 0:USBC-1, 1:USBC-2 */
|
|
uint16_t E_UP_N:1; /*!< bit: 12 ENABLE SUP 1:2 MUX WHEN 0 */
|
|
uint16_t S_UP:1; /*!< bit: 13 SELECT UP PATH 0:USBC-1, 1:USBC-2 */
|
|
uint16_t HUB_RESET_N:1; /*!< bit: 14 RESET USB HUB WHEN 0, RUN WHEN 1 */
|
|
uint16_t HUB_CONNECT:1; /*!< bit: 15 SIGNAL VBUS CONNECT TO USB HUB WHEN 1 */
|
|
} bit; /*!< Structure used for bit access */
|
|
uint16_t reg; /*!< Type used for register access */
|
|
} sr_exp_t;
|
|
|
|
extern sr_exp_t sr_exp_data;
|
|
|
|
void SR_EXP_WriteData(void);
|
|
void SR_EXP_Init(void);
|
|
|
|
#endif //_SPI_H_
|