History

Nick Brassel 154d35ac14 Remove `UNUSED_PINS` (#17931 )		2022-08-06 23:23:35 +10:00
..
keymaps	RESET -> QK_BOOT default keymaps (#17037 )	2022-05-15 20:26:27 +01:00
chconf.h	ChibiOS conf migrations... take 11 (#11646 )	2021-01-21 17:00:53 +11:00
config.h	Remove `UNUSED_PINS` (#17931 )	2022-08-06 23:23:35 +10:00
info.json	Move keyboard USB IDs and strings to data driven: V (#17901 )	2022-08-03 23:52:24 +01:00
readme.md	[Keyboard] Add Viktus Styrka (#10982 )	2020-11-25 10:48:12 -08:00
rules.mk	Tidy up NKRO_ENABLE rules (#15382 )	2021-12-09 16:05:44 +11:00
styrka.c	[Keyboard] Add Viktus Styrka (#10982 )	2020-11-25 10:48:12 -08:00
styrka.h	[Keyboard] Add Viktus Styrka (#10982 )	2020-11-25 10:48:12 -08:00

readme.md

Viktus Styrka

The Viktus Styrka is a 65% + left macro block created in a collaboration of OneCreativeMind and BlindAssassin111 (Viktus owner). All design done by BlindAssassin111. The board supports ANSI and ISO modifiers as well as split backspace and stepped/non-stepped caps lock.

The PCB is an arm powered board utilizing the STM32F072CBT6 mcu. The PCB is designed to work with the universal daughterboard and a 4in (~100mm) 4 pin JST SR cable with reversed pinout (pin 1 of both connectors is the same wire etc.).

On the PCB is a single button for a reset for flashing. As well, there is a Segger J-Link 6-pin Needle Adapter footprint for reflashing the mcu as a backup in case of a bootloader issue.

Keyboard Maintainer: jrfhoutx, blindassassin111
Hardware Supported: Styrka
Hardware Availability: https://www.Viktus.Design

Make example for this keyboard (after setting up your build environment):

make viktus/styrka:default

Flashing example for this keyboard:

make viktus/styrka:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.