qmk-keychron-q3-colemak-dh/keyboards/dztech/dz60rgb_wkl/v2/config.h
2021-01-15 05:00:04 +11:00

64 lines
2.2 KiB
C

#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0x445A
#define PRODUCT_ID 0x1321
#define DEVICE_VER 0x0002
#define MANUFACTURER DZTECH
#define PRODUCT DZ60RGB_WKL
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 }
#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 3
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
#ifdef RGB_MATRIX_ENABLE
# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
# define RGB_MATRIX_KEYPRESSES
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define DISABLE_RGB_MATRIX_BAND_SAT
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define DISABLE_RGB_MATRIX_SPLASH
# define DISABLE_RGB_MATRIX_MULTISPLASH
# define DISABLE_RGB_MATRIX_SOLID_SPLASH
# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DISABLE_RGB_MATRIX_DIGITAL_RAIN
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
# define DRIVER_COUNT 2
# define DRIVER_1_LED_TOTAL 62
# define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
#endif