History

Joel Challis 58c38175e6 Remove redundant disabling of features (#22926 )		2024-03-09 03:05:07 +00:00
..
keymaps
config.h	Migrate WEAR_LEVELING_* to info.json (#23077 )	2024-02-14 08:54:24 +00:00
halconf.h
info.json	Remove redundant disabling of features (#22926 )	2024-03-09 03:05:07 +00:00
magnum_ergo_1.c
mcuconf.h
readme.md
rules.mk

readme.md

Gondolindrim X Dark Magnum Ergo 1 PCB QMK firmware

The Magnum Ergo 1 is an Alice-layout ergonomic keyboard designed by Dark, with a PCB designer by Gondolindrim.

Keyboard Maintainer: Gondolindrim
Hardware Supported: proprietary PCB using STM32F4x1C microcontroller;
Availability: as of november 2022 both keyboard and PCB were sold in a private Group Buy; therefore availability is limited.

How to flash

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key, grave accent in the default keymap) and plug in the keyboard;
Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds;
Keycode in layout: Press the key mapped to QK_BOOT; in the default layout, that is top left key ('grave') in layer 1.

How to compile and flash

You can compile the Iron 165R2 default keymap by using the following:

make magnum_ergo_1:default

And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:

make magnum_ergo_1:default:flash