History

Nick Brassel c9f619124d Encodermap direction define. (#20454 )		2023-04-15 16:18:44 +01:00
..
graphics	Clean up usage of `QMK_KEYBOARD_H` (#20167 )	2023-03-20 08:12:05 +11:00
keymaps	Encodermap direction define. (#20454 )	2023-04-15 16:18:44 +01:00
rev1	Remove more empty headers (#20155 )	2023-03-17 14:02:04 +11:00
rev2	Remove more empty headers (#20155 )	2023-03-17 14:02:04 +11:00
config.h	Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303 )	2023-04-06 18:00:54 +10:00
djinn_portscan_matrix.c	[chore] keyboards/tzarc: Alignment with clang-format. (#20265 )	2023-03-26 23:56:09 +01:00
djinn_split_sync.c	Sync activity timestamps between sides. (#20192 )	2023-03-21 10:16:11 +01:00
djinn_usbpd.c	[chore] keyboards/tzarc: Alignment with clang-format. (#20265 )	2023-03-26 23:56:09 +01:00
djinn.c	Sync activity timestamps between sides. (#20192 )	2023-03-21 10:16:11 +01:00
djinn.h	Sync activity timestamps between sides. (#20192 )	2023-03-21 10:16:11 +01:00
halconf.h
info.json	Move `RGB_MATRIX_DRIVER` to data driven (#20350 )	2023-04-08 18:08:08 +10:00
mcuconf.h
readme.md
rules.mk	Move `RGB_MATRIX_DRIVER` to data driven (#20350 )	2023-04-08 18:08:08 +10:00

readme.md

Djinn

The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster and encoders. It also has a 5-way tactile switch under the thumb. Oh, and two displays.

Keyboard Maintainer: tzarc
Hardware Supported: Djinn: rev1, rev2
Hardware Availability: Open-source

Make example for this keyboard (after setting up your build environment):

make tzarc/djinn/rev2:default

Flashing example for this keyboard:

make tzarc/djinn/rev2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the top-left key and plug in the keyboard.
Physical reset button: Briefly press the button on the back of the PCB.
Keycode in layout: Press the key mapped to QK_BOOT if it is available.