keyboard/qmk-keychron-q3-colemak-dh
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
ba76fcfb8b
qmk-keychron-q3-colemak-dh/keyboards/converter/xt_usb
History
markspanbroek 6d7745a110 Keyboard: Port of TMK XT USB Converter (#3619) 
* Converter: add XT USB converter from TMK

* Converter: port TMK code for USB converter to QMK

* Apply requested changes after code review by @drashna

- use "pragma once" instead of include guards
- use LAYOUT instead of KEYMAP
- allow customisation with matrix_init_user() and matrix_scan_user()
- set BOOTLOADER instead of BOOTLOADER_SIZE
- Add XT_ENABLE to OPT_DEFS

* Remove unnecessary lines
2018-10-22 12:37:03 -07:00
..
keymaps/default Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
config.h Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
led.c Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
matrix.c Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
README.md Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
rules.mk Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
xt_usb.c Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00
xt_usb.h Keyboard: Port of TMK XT USB Converter (#3619) 2018-10-22 12:37:03 -07:00

README.md

XT to USB keyboard converter

This is a port of TMK's converter/xt_usb to QMK.

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

  1. Connect Vcc and GND.
  2. Connect Clock and Data line. Clock is on PD1, Data on PD0 by default. And optionally you can use PB7 for Reset.(Compatible to Soarer's converter) To change pin configuration edit config.h.
  3. You need pull-up resistor. 1K-10K Ohm will be OK.

XT keyboard protocol resource

https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol