History

Ryan ccb6c908dd Remove `SOFT_SERIAL_PIN` for non-split boards (#19774 ) * Remove `SOFT_SERIAL_PIN` for non-split boards * Delete more empty config.h		2023-02-08 23:57:42 +00:00
..
keymaps/default	Refactor some layouts which contain keyboard name (#19645 )	2023-01-20 05:44:05 +00:00
info.json	Refactor some layouts which contain keyboard name (#19645 )	2023-01-20 05:44:05 +00:00
readme.md
rules.mk

readme.md

CHORD ZERO Stenographic Keyboard

CHORD ZERO is a stenographic keyboard that can be used with Plover or any other application that supports the TX Bolt or GeminiPR protocol.

Keyboard Maintainer: Simon Hengel
Hardware Supported: REV 0, REV 1
Hardware Availability: https://github.com/sol/chord-zero#readme

Make example for this keyboard (after setting up your build environment):

make chord/zero:default

qmk compile -kb chord/zero -km default

This will generate chord_zero_default.uf2.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Reset key combo: Press the six keys at the outer columns on each side of the keyboard simultaneously while it is plugged in
Bootmagic reset: Hold down the top left key and plug in the keyboard
Physical reset button: Press the button on the back of the PCB and plug in the keyboard

Once the keyboard is in bootloader mode you can mount it as a USB mass storage device and copy the firmware (the file chord_zero_default.uf2) onto it. Once copying is completed the keyboard will reboot automatically.