History

Ryan ccb6c908dd Remove `SOFT_SERIAL_PIN` for non-split boards (#19774 ) * Remove `SOFT_SERIAL_PIN` for non-split boards * Delete more empty config.h		2023-02-08 23:57:42 +00:00
..
keymaps	Remove legacy keycodes, part 5 (#18710 )	2022-10-15 22:29:43 +01:00
bstk100.c	[Keyboard] bstk100 handwired (#14158 )	2022-01-08 13:13:29 -08:00
bstk100.h	[Keyboard] bstk100 handwired (#14158 )	2022-01-08 13:13:29 -08:00
config.h	Remove `SOFT_SERIAL_PIN` for non-split boards (#19774 )	2023-02-08 23:57:42 +00:00
info.json	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
readme.md	[Keyboard] bstk100 handwired (#14158 )	2022-01-08 13:13:29 -08:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

bstk100

BUFFALO USB 10-Key keyboard BSTK100 modification by Pro Micro and QMK firmware .
see [FREE WING HOME PAGE] for more detail .

Keyboard Maintainer: FREE WING GitHub
Hardware Supported: Pro Micro ATmega32U4 5V/16MHz
Hardware Availability: BUFFALO USB 10-Key keyboard BSTK100BK, Pro Micro ATmega32U4 5V/16MHz

Make example for this keyboard (after setting up your build environment):

make handwired/bstk100:default

Enable VIA feature in QMK

make handwired/bstk100:via

Flashing example for this keyboard:

make handwired/bstk100:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in one way:

Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead