127 lines
4.7 KiB
C
127 lines
4.7 KiB
C
/*
|
|
Copyright 2021 Mechlovin' Studio
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#define MATRIX_ROW_PINS { A4, A3, C13, A1, A2}
|
|
#define MATRIX_COL_PINS { B10, B11, B2, B1, B0, A6, A5, A10, A9, A15, B3, B4, B5, B8, B9 }
|
|
|
|
#ifdef RGBLIGHT_ENABLE
|
|
#define RGB_DI_PIN A7
|
|
#define WS2812_SPI SPID1 // default: SPID1
|
|
#define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
|
|
#define RGBLED_NUM 23
|
|
#define RGBLIGHT_EFFECT_BREATHING
|
|
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
|
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
|
#define RGBLIGHT_EFFECT_SNAKE
|
|
#define RGBLIGHT_EFFECT_KNIGHT
|
|
#define RGBLIGHT_EFFECT_CHRISTMAS
|
|
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
|
#define RGBLIGHT_EFFECT_RGB_TEST
|
|
#define RGBLIGHT_EFFECT_ALTERNATING
|
|
#define RGBLIGHT_EFFECT_TWINKLE
|
|
#define RGBLIGHT_HUE_STEP 8
|
|
#define RGBLIGHT_SAT_STEP 8
|
|
#define RGBLIGHT_VAL_STEP 8
|
|
#endif
|
|
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
//rgb matrix setting
|
|
// This is a 7-bit address, that gets left-shifted and bit 0
|
|
// set to 0 for write, 1 for read (as per I2C protocol)
|
|
// The address will vary depending on your wiring:
|
|
// 0b1110100 AD <-> GND
|
|
// 0b1110111 AD <-> VCC
|
|
// 0b1110101 AD <-> SCL
|
|
// 0b1110110 AD <-> SDA
|
|
#define DRIVER_ADDR_1 0b0110010
|
|
#define DRIVER_COUNT 1
|
|
#define DRIVER_LED_TOTAL 66
|
|
|
|
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
|
|
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
|
|
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
|
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
|
|
#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
|
|
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
|
|
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
|
|
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
|
|
|
|
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
|
|
#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
|
|
#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
|
|
#define ENABLE_RGB_MATRIX_BREATHING
|
|
#define ENABLE_RGB_MATRIX_BAND_SAT
|
|
#define ENABLE_RGB_MATRIX_BAND_VAL
|
|
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
|
|
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
|
|
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
|
|
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
|
|
#define ENABLE_RGB_MATRIX_CYCLE_ALL
|
|
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
|
|
#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
|
|
#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
|
|
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
|
|
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
|
|
#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
|
|
#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
|
|
#define ENABLE_RGB_MATRIX_DUAL_BEACON
|
|
#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
|
|
#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
|
|
#define ENABLE_RGB_MATRIX_RAINDROPS
|
|
#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
|
|
#define ENABLE_RGB_MATRIX_HUE_BREATHING
|
|
#define ENABLE_RGB_MATRIX_HUE_PENDULUM
|
|
#define ENABLE_RGB_MATRIX_HUE_WAVE
|
|
#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
|
|
#define ENABLE_RGB_MATRIX_PIXEL_RAIN
|
|
|
|
#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
|
|
#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
|
|
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
|
|
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
|
|
#define ENABLE_RGB_MATRIX_SPLASH
|
|
#define ENABLE_RGB_MATRIX_MULTISPLASH
|
|
#define ENABLE_RGB_MATRIX_SOLID_SPLASH
|
|
#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
|
|
|
|
#define RGB_MATRIX_DISABLE_KEYCODES
|
|
|
|
#define I2C1_CLOCK_SPEED 400000
|
|
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
|
|
|
|
#endif
|
|
|
|
#ifdef ENCODER_ENABLE
|
|
#define ENCODERS_PAD_A { B12 }
|
|
#define ENCODERS_PAD_B { B13 }
|
|
#define ENCODER_RESOLUTION 4
|
|
#define TAP_CODE_DELAY 10
|
|
#endif
|
|
|
|
#define LED_NUM_LOCK_PIN A0
|
|
#define LED_CAPS_LOCK_PIN C14
|
|
#define LED_SCROLL_LOCK_PIN C15
|