qmk-keychron-q3-colemak-dh/keyboards/xiudi/xd002
2021-09-12 15:27:29 +10:00
..
keymaps Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159) 2021-08-22 13:53:49 +10:00
.noci Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159) 2021-08-22 13:53:49 +10:00
config.h Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159) 2021-08-22 13:53:49 +10:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md Update readme files (#14172) 2021-08-26 16:53:24 +01:00
rules.mk Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2021-09-12 15:27:29 +10:00
xd002.c Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159) 2021-08-22 13:53:49 +10:00
xd002.h Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159) 2021-08-22 13:53:49 +10:00

xd002

xd002

2% Custom mechanical keyboard. ATtiny85 powered, with 2*WS2812 LEDs, and the micronucleus bootloader.

Note: Due to limited firmware space, a lot of features have to be disabled to get a functioning QMK based keyboard.

  • Keyboard Maintainer: zvecr
  • Hardware Supported: xd002
  • Hardware Availability: kprepublic

Make example for this keyboard (after setting up your build environment):

make xiudi/xd002:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Flashing

Prerequisites

git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline/
sudo make install

On Linux, youll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place these files in /etc/udev/rules.d/. Once added run the following:

sudo udevadm control --reload-rules
sudo udevadm trigger

Instructions

Reset Key: Hold down key nearest to the USB socket while plugging in the keyboard.

make xd002:default:flash

# or directly with...
micronucleus --run <firmware.hex>

Recovery