0850a8cb63
* e6.5 actually already had a 65_ansi_blocker LAYOUT macro, so just had to enable in rules. * Add the 65_ansi_blocker LAYOUT macro and enable in rules.mk * rename LAYOUT macro in .h and in the keymap.c as it was only a default keymap. Also enable in rules.mk * rename but also had to define the existing LAYOUT macro as the new one to prevent breakage of existing keymaps * add 65_ansi_blocker support for vinta * forgot to update the info.json on these * add new default layout 65_ansi_blocker support to alt * add 65_ansi_blocker support * undo changes
50 lines
1.5 KiB
Makefile
50 lines
1.5 KiB
Makefile
# project specific files
|
|
|
|
## chip/board settings
|
|
# - the next two should match the directories in
|
|
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
MCU_FAMILY = STM32
|
|
MCU_SERIES = STM32F0xx
|
|
|
|
# Linker script to use
|
|
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
# or <this_dir>/ld/
|
|
MCU_LDSCRIPT = STM32F042x6
|
|
|
|
# Startup code to use
|
|
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
MCU_STARTUP = stm32f0xx
|
|
|
|
# Board: it should exist either in <chibios>/os/hal/boards/
|
|
# or <this_dir>/boards
|
|
BOARD = GENERIC_STM32_F042X6
|
|
|
|
# Cortex version
|
|
MCU = cortex-m0
|
|
|
|
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
ARMV = 6
|
|
|
|
# Vector table for application
|
|
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
|
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
|
#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
|
|
OPT_DEFS =
|
|
|
|
# Options to pass to dfu-util when flashing
|
|
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
|
|
|
# Build Options
|
|
# comment out to disable the options.
|
|
#
|
|
BACKLIGHT_ENABLE = no
|
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
CONSOLE_ENABLE = no # Console for debug
|
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
|
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
|
|
|
|
LAYOUTS = 65_ansi_blocker
|