History

Joel Challis d2accb48e7 RESET -> QK_BOOT keyboard readme (#18110 )		2022-08-20 11:34:17 +01:00
..
keymaps/default
config.h	Move keyboard USB IDs and strings to data driven: S (#17889 )	2022-08-04 08:12:37 +10:00
info.json	Move keyboard USB IDs and strings to data driven: S (#17889 )	2022-08-04 08:12:37 +10:00
launch_1.c	[Keyboard] launch_1 LED index correction (#17118 )	2022-05-19 22:44:08 -07:00
launch_1.h
post_rules.mk
readme.md	RESET -> QK_BOOT keyboard readme (#18110 )	2022-08-20 11:34:17 +01:00
rgb_matrix_kb.inc
rules.mk
usb_mux.c
usb_mux.h

System76 Launch Configurable Keyboard (launch_1)

The Launch Configurable Keyboard is engineered to be comfortable, fully customizable, and make your workflow more efficient.

Additional Launch Keyboard resources:

Building Firmware

To build the firmware using make (after setting up the build environment), e.g.:

make -r system76/launch_1:default

Equivalently, using the QMK CLI:

qmk compile -kb system76/launch_1 -km default

To build and flash the firmware on the keyboard, e.g.:

make -r system76/launch_1:default:flash

Equivalently, using the QMK CLI:

qmk flash -kb system76/launch_1 -km default

To flash the firmware (and/or bootloader) using ISP refer to the ISP Flashing Guide.

Factory fuse values => Low: 0x5E, High: 0x99, Extended: 0xF3, Lock Bits: 0xFF

See the build environment setup and the make instructions for more information. If new to QMK, start with the Complete Newbs Guide.

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard.
Keycode in layout: Press the key mapped to QK_BOOT in the second layer (Escape).
Electrical reset: Briefly short AVR ISP's GND (6) and RST (5) pads on the back of the PCB.