1a2a54c326
* [keyboard] TA-65 by maartenwut Add ta65 to QMK with 4 layouts * Simplify config.h * Simplify keymap * Update bootloader - confirmed to be qmk-dfu by maartenwut * Update keyboards/ta65/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Review feedback - fauxpark recommendations - noroadsleft recommendations * Repair info.json structure JSON objects were not properly nested according to the QMK specification. * Switch info.json to "debug linting" So I can read the file more easily. * Remove k2c and k31 from LAYOUT_tsangan k2c was the Non-US Hash position, and k31 was the Non-US Backslash position, but this layout is intended for ANSI. * Correct LAYOUT_tsangan data in info.json * Update tsangan keymap to use updated LAYOUT_tsangan macro correctly * Rename LAYOUT_tsangan to LAYOUT_ansi_tsangan Increased clarity. * Rename tsangan keymap as default_ansi_tsangan Per QMK Keyboard Guidelines. * Fix object ordering for ISO layouts in info.json ISO Enter's object was out of sequence in both layouts. * Rename ISO keymaps per QMK Keyboard Guidelines - rename iso keymap as default_iso - rename iso_tsangan keymap as default_iso_tsangan * Add default_ansi keymap For user reference. * Enable Community Layout support LAYOUT_ansi and LAYOUT_iso conform to the 65_ansi and 65_iso Community Layouts, respectively. - rename LAYOUT_ansi to LAYOUT_65_ansi - rename LAYOUT_iso to LAYOUT_65_iso - update keymaps as appropriate - add LAYOUTS rule to rules.mk * Disambiguate key labels in info.json * Remove trailing white space from info.json * Update keyboards/ta65/keymaps/maartenwut/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com>
66 lines
2.6 KiB
Makefile
66 lines
2.6 KiB
Makefile
# MCU name
|
|
MCU = atmega32u4
|
|
|
|
# Processor frequency.
|
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
# automatically to create a 32-bit value in your source code.
|
|
#
|
|
# This will be an integer division of F_USB below, as it is sourced by
|
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
# does not *change* the processor frequency - it should merely be updated to
|
|
# reflect the processor speed set externally so that the code can use accurate
|
|
# software delays.
|
|
F_CPU = 16000000
|
|
|
|
|
|
#
|
|
# LUFA specific
|
|
#
|
|
# Target architecture (see library "Board Types" documentation).
|
|
ARCH = AVR8
|
|
|
|
# Input clock frequency.
|
|
# This will define a symbol, F_USB, in all source code files equal to the
|
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
# at the end, this will be done automatically to create a 32-bit value in your
|
|
# source code.
|
|
#
|
|
# If no clock division is performed on the input clock inside the AVR (via the
|
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
F_USB = $(F_CPU)
|
|
|
|
# Interrupt driven control endpoint task(+60)
|
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
|
|
|
|
# Boot Section Size in *bytes*
|
|
# Teensy halfKay 512
|
|
# Teensy++ halfKay 1024
|
|
# Atmel DFU loader 4096
|
|
# LUFA bootloader 4096
|
|
# USBaspLoader 2048
|
|
BOOTLOADER = qmk-dfu
|
|
|
|
# Build Options
|
|
# comment out to disable the options.
|
|
#
|
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870)
|
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150)
|
|
MIDI_ENABLE = no # MIDI controls
|
|
AUDIO_ENABLE = no
|
|
UNICODE_ENABLE = no # Unicode
|
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
|
|
LAYOUTS = 65_ansi 65_iso
|