History

Ryan 172a40686b Move single `LAYOUT_all`s to data driven (#20430 )		2023-04-15 21:08:15 +10:00
..
boards/m12og_v1	Add Matrix 8XV1.2 OG rev1 PCB (#11614 )	2021-06-11 20:35:13 +10:00
keymaps/default	Remove rgblight_list.h (#18878 )	2022-10-27 23:50:14 +01:00
ld	Add Matrix 8XV1.2 OG rev1 PCB (#11614 )	2021-06-11 20:35:13 +10:00
chconf.h	Add Matrix 8XV1.2 OG rev1 PCB (#11614 )	2021-06-11 20:35:13 +10:00
config.h	Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303 )	2023-04-06 18:00:54 +10:00
halconf.h	Add Matrix 8XV1.2 OG rev1 PCB (#11614 )	2021-06-11 20:35:13 +10:00
info.json	Move single `LAYOUT_all`s to data driven (#20430 )	2023-04-15 21:08:15 +10:00
matrix.c	Add Matrix 8XV1.2 OG rev1 PCB (#11614 )	2021-06-11 20:35:13 +10:00
mcuconf.h	Add Matrix 8XV1.2 OG rev1 PCB (#11614 )	2021-06-11 20:35:13 +10:00
readme.md	Add Matrix 8XV1.2 OG rev1 PCB (#11614 )	2021-06-11 20:35:13 +10:00
rev1.c	Move single `LAYOUT_all`s to data driven (#20430 )	2023-04-15 21:08:15 +10:00
rules.mk	Move EFL wear-leveling driver to be default for F1, F3, F4, L4, G4, WB32, GD32V. (#19020 )	2022-11-11 23:57:44 +00:00

readme.md

Matrix 8XV1.2 OG keyboard

This was the Matrix 8XV1.2 OG keyboard made by the Matrix team.
Note: This firmware only supports ANSI only version (green/yellow PCB), and DOES NOT support the 8XV1.2 OG ISO/ANSI version.

Keyboard Maintainer: kb-elmo
Hardware Supported: Matrix 8XV1.2 OG ANSI only PCB
Hardware Availability: Matrix Lab

Make example for this keyboard (after setting up your build environment):

make matrix/m12og/rev1:default

Bootloader:

Hold down ESC while plugging in the keyboard. The board will show up as a mass storage device on your computer. Drag and drop the compiled firmware .bin file into it. The board will automatically reset and load the new firmware.

⛔ DO NOT DO THIS ON A MAC OS SYSTEM! IT WILL PERMANENTLY BRICK THE KEYBOARD!!!

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.