History

Erovia ad86894ae7 Rename keyboard-level readmes to lower-case (#10759 ) This is the recommendation in the [PR Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it will make working with them easier in the CLI/API/etc.		2020-10-25 15:23:42 +00:00
..
keymaps	[Keyboard] add support for ymd75 rev3 (#10483 )	2020-10-04 15:19:34 -07:00
rev1	[Keyboard] add support for ymd75 rev3 (#10483 )	2020-10-04 15:19:34 -07:00
rev2	[Keyboard] add support for ymd75 rev3 (#10483 )	2020-10-04 15:19:34 -07:00
rev3	[Keyboard] add support for ymd75 rev3 (#10483 )	2020-10-04 15:19:34 -07:00
config.h	[Keyboard] add support for ymd75 rev3 (#10483 )	2020-10-04 15:19:34 -07:00
info.json	[Keyboard] add support for ymd75 rev3 (#10483 )	2020-10-04 15:19:34 -07:00
readme.md	Rename keyboard-level readmes to lower-case (#10759 )	2020-10-25 15:23:42 +00:00
rules.mk	YMD75: move MCU/Bootloader rules to revision level (#9452 )	2020-06-18 00:15:22 -07:00
ymd75.c	Add support for YMD75 rev 2 (#8853 )	2020-04-20 00:58:58 +01:00
ymd75.h	[Keyboard] add support for ymd75 rev3 (#10483 )	2020-10-04 15:19:34 -07:00

readme.md

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

Keyboard Maintainer: Wayne K Jones
Hardware Supported:
- rev1 (ATmega32a)
- rev2 (ATmega32a)
- rev3 (ATmega32u4)
Hardware Availability: https://www.aliexpress.com/item/32812690592.html

Make example for this keyboard (after setting up your build environment):

make ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.