qmk-keychron-q3-colemak-dh/keyboards/xiudi/xd002
2022-06-24 12:40:09 +02:00
..
keymaps Do not enable PERMISSIVE_HOLD when TAPPING_TERM exceeds 500ms (#15674) 2022-06-24 12:40:09 +02:00
.noci
config.h
info.json
readme.md rename kprepublic bm keyboards to have a standardized naming format (#15047) 2021-11-18 08:37:23 +11:00
rules.mk Remove half implemented micronucleus bootloader support (#16252) 2022-02-06 22:59:03 +00:00
xd002.c
xd002.h

xd002

xd002

2% Custom mechanical keyboard. ATtiny85 powered, with 2*WS2812 LEDs, and the micronucleus bootloader.

Note: Due to limited firmware space, a lot of features have to be disabled to get a functioning QMK based keyboard.

  • Keyboard Maintainer: zvecr
  • Hardware Supported: xd002
  • Hardware Availability: kprepublic

Make example for this keyboard (after setting up your build environment):

make xiudi/xd002:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Flashing

Prerequisites

git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline/
sudo make install

On Linux, youll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place these files in /etc/udev/rules.d/. Once added run the following:

sudo udevadm control --reload-rules
sudo udevadm trigger

Instructions

Reset Key: Hold down key nearest to the USB socket while plugging in the keyboard.

make xiudi/xd002:default:flash

# or directly with...
micronucleus --run <firmware.hex>

Recovery