History

Ryan f718a10889 Fix up build options comments (#15463 )		2021-12-12 18:05:37 -08:00
..
keymaps	Six Pack and ortho_ layout updates (#13587 )	2021-07-19 17:30:09 -07:00
.noci	Exclude more keyboards from CI (#11436 )	2021-01-13 08:12:28 -08:00
config.h	Merge remote-tracking branch 'upstream/master' into develop	2021-09-26 03:04:11 -07:00
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
matrix.c
readme.md
rules.mk	Fix up build options comments (#15463 )	2021-12-12 18:05:37 -08:00
sixkeyboard.c
sixkeyboard.h	Change keyboard level include guards to `pragma once` (#14248 )	2021-09-01 19:03:14 +10:00

readme.md

Techkeys SixKeyBoard

Keyboard Maintainer: QMK Community
Hardware Supported: Techkeys SixKeyBoard PCB
Hardware Availability: Techkeys

Make example for this keyboard (after setting up your build environment):

make sixkeyboard:default

See build environment setup then the make instructions for more information.

Hardware Info

The schematic is like this:

 switches       leds
,--+--+--.   ,--+--+--.
|C7|B7|B5|   |C6|B6|B4|
+--+--+--+   +--+--+--+
|D6|D1|D4|   |D5|D2|D3|
`--+--+--'   `--+--+--'

The LED on the bottom is C4. All 7 of the leds are turned on when the keyboard boots-up in the sixkeyboard.c file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit.

There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.