History

Ryan f9aeea64c1 Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )		2023-02-08 18:41:46 +11:00
..
2x3	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
2x4	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
2x5	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
readme.md	Handwired/Stream_Cheap/2x4: Add via support (#13297 )	2021-08-11 07:40:30 +10:00

readme.md

Stream Cheap

An ortholinear macropad, available in 2x3, 2x4, and 2x5 sizes.

Hardware:

3d printed switch plate
6-10 key switches
3d printed case
Handwired in Direct Pins mode (i.e. all switches share a common GND and are wired to their own pin)
Uses a Pro Micro
Includes a reset switch accessible by a hole on the bottom
Keyboard Maintainer: hartk1213
Hardware Supported: Pro Micro
Hardware Availability: Thingiverse

Make example for this keyboard (after setting up your build environment):

make handwired/stream_cheap/2x3:default
make handwired/stream_cheap/2x4:default
make handwired/stream_cheap/2x4:via
make handwired/stream_cheap/2x5:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.