# Display hardware configuration. display { # Target frame rate, actual frame rate depends on hardware options. fps = 25 # Main display is where all the magic happens. main { # Type of display type = "gp1294" size = "256x48" reset = "GPIO25" bl = "GPIO24" # Mode (spi or i2c) mode = "spi" # SPI settings port = "spi0.0" #type = "ssd1322" #size = "256x64" #reset = "GPIO25" #dc = "GPIO24" #bl = "GPIO23" # I2C settings #addr = "3c" #bus = "" # default bus } ## If you don't have one big 256x64 display, you can glue two 128x64 displays ## together logically (much cheaper): #left { # type = "ssd1306" # addr = "3c" # size = "128x64" #} #right { # type = "ssd1306" # addr = "3d" # size = "128x64" #} # If you have a separate (color) display for displaying album art. If not, the # main display will use a 64x64 area for showing album art. #meta { # type = "st7789" # size = "240x240" # port = "" # SPI0.0 # reset = "GPIO23" # reset pin # dc = "GPIO24" # data control pin # bl = "GPIO27" # backlight pin #} } # Screen configuration. screen { # Default "now playing" screen playing { # Spectrum analyzer spectrum { # Min and max frequency min = 100 max = 15000 # Peak hold (-1 to disable). hold = 20 # DSP window function (blackman, hamming, hann or none). window = "blackman" # Display waterfall instead of bars. waterfall = false } # Format display (format, duration & progress) line. format { # Font file. font = "Hack-Regular.ttf" } # Track display (artist & title) line. track { # Text color. color = "white" # Font file. font = "./SourceSansPro-ExtraLight.ttf" # Font size. #font_size = 32 # Font DPI. #dpi = 96 # Font hinting (none, vertical or full). hinting = "full" } } # Full screen stereo spectrum analyzer spectrum { # Min and max frequency min = 100 max = 15000 # Peak hold. hold = 20 # DSP window function. window = "blackman" } # Full screen VU meters vumeter { } } # Input for controlling the display. input { # Rotary encoder. encoder { # The rotary is configured as input device. # # On Raspberry Pi, this can be done by adding the following line # to /boot/config.txt: # # # Rotary encoder on GPIO6 & GPIO13 # dtoverlay=rotary-encoder,pin_a=6,pin_b=13,relative_axis=1,steps-per-period=2 # # # Rotary push button, KEY_MUTE on GPIO15 # dtoverlay=gpio-key,gpio=5,label="rotary-switch",keycode=113 type = "input" #type = "gpio" #cw = "GPIOx" # clock wise pulse pin #ccw = "GPIOx" # counter clock wise pulse pin #sw = "GPIO5" # switch pin } } # Player controls the music. player { # Auto detect the player. type = "auto" ## rAudio (also detected automatically on local installations) # type = "raudio" # host = "localhost:6600" ## Music Player Daemon # type = "mpd" # host = "localhost:6600" # password = "" } # Audio is the source of audio samples. audio { # Type of audio stream. Currently supported are file or fifo. type = "fifo" # Path to the audio stream. path = "/tmp/beatglow.fifo" # Rate is the sampling rate. rate = 44100 # Channels are the number of audio channels. channels = 2 # Bits per sample. bits = 16 # Big Endian decoding (default: use Little Endian). #be = true # Delay can compensate for timing differences between your DAC and reading samples # from the audio source; use this if the visualisations are ahead of the audio. delay = "25ms" } # Mixer for controlling the volume. mixer { # Type of mixer (alsa). type = "alsa" # Put your card here, you can list them by using: aplay -l card = 5 }