// Package ssd1305 provides a driver for the SSD1305 OLED controller. package ssd1305 import ( "image" "image/color" "time" "periph.io/x/conn/v3/gpio" "periph.io/x/conn/v3/i2c" "periph.io/x/conn/v3/physic" "periph.io/x/conn/v3/spi" "git.maze.io/go/harmon/display" "git.maze.io/go/harmon/internal/pixel" ) var defaultInfo = display.MonochromeDisplayInfo{ ResetPulseWidth: 100 * time.Millisecond, ResetWait: 100 * time.Millisecond, PreChipEnableWait: 10 * time.Nanosecond, PostChipEnableWait: 20 * time.Nanosecond, DataSetupTime: 40 * time.Nanosecond, WritePulseWidth: 150 * time.Nanosecond, Width: 128, Height: 32, } const ( spiMode spi.Mode = spi.Mode0 spiSpeed physic.Frequency = 4 * 1000 * 1000 maxPixels = 256 * 32 ) var emptyBuf [maxPixels >> 3]byte type Device struct { hal display.MonochromeDisplay info display.MonochromeDisplayInfo buf pixel.Image[pixel.Monochrome] } func NewI2C(bus i2c.Bus, addr uint16, width, height int) (*Device, error) { if addr == 0 { addr = 0x3c } if width <= 0 { width = int(defaultInfo.Width) } if height <= 0 { height = int(defaultInfo.Height) } var info = new(display.MonochromeDisplayInfo) *info = defaultInfo info.Width = uint16(width) info.Height = uint16(height) c := &i2c.Dev{Bus: bus, Addr: addr} d := &Device{ hal: display.NewSSD13xxDisplay(c, *info), info: *info, buf: pixel.NewImage[pixel.Monochrome](width, height), } if err := d.configure(); err != nil { return nil, err } return d, nil } func NewSPI(port spi.Port, reset gpio.PinOut, width, height uint8) (*Device, error) { var info = new(display.MonochromeDisplayInfo) *info = defaultInfo info.Reset = reset c, err := port.Connect(spiSpeed, spiMode, 8) if err != nil { return nil, err } d := &Device{ hal: display.NewSSD13xxDisplay(c, *info), } if err := d.configure(); err != nil { return nil, err } return d, nil } func (d *Device) configure() (err error) { if err = d.hal.Init(); err != nil { return } if err = d.hal.StartTransfer(); err != nil { return } if err = d.hal.SendCommand([]byte{ 0xae, // Set display off 0xd5, 0x80, // Set display clock divide ratio/oscillator frequency 0xa8, 0x3f, // Set multiplex ratio 0xd3, uint8(d.info.Width), // Set display offset 0x40, // Set display start line to 0 0x20, 0x00, // Set horizontal addressing mode 0xa1, // Set segment remap a0/a1 0xc8, // Set scan direction (c0: normal, c8: reverse, 0xda, 0x12, // Set com pins hardware configuration 0x81, 0xcf, // Set contrast control 0xd9, 0xf1, // Set pre-charge period 0xdb, 0x40, // Set VCOMH deselect level 0x2e, // Deactivate scroll 0xa4, // Set display output RAM to display 0xa6, // Set normal display mode }); err != nil { return } return d.hal.EndTransfer() } func (d *Device) Clear() error { d.buf.FillSolidColor(pixel.Off) return d.Refresh() } func (d *Device) Refresh() (err error) { _ = d.hal.SendCommand([]byte{0x15, 0, byte(defaultInfo.Width) - 1}) // Set column address _ = d.hal.SendCommand([]byte{0x75, 0, byte(defaultInfo.Height) - 1}) // Set row address buf := d.buf.RawBuffer() for i := 0; i < len(buf); i += 16 { if err = d.hal.SendData(buf[i : i+16]); err != nil { break } } return } func (d *Device) Size() (width, height int) { return d.buf.Bounds().Dx(), d.buf.Bounds().Dy() } func (d *Device) Bounds() image.Rectangle { return d.buf.Bounds() } func (d *Device) ColorModel() color.Model { return pixel.MonochromeModel } func (d *Device) At(x, y int) color.Color { return d.buf.At(x, y) } func (d *Device) Set(x, y int, c color.Color) { d.buf.Set(x, y, c) } // Interface check var ( // _ display.Display = &Device{} // _ display.Image = &Device{} )