Files
beatglow/beatglow.conf

193 lines
4.5 KiB
Plaintext

# Display hardware configuration.
display {
# Target frame rate, actual frame rate depends on hardware options.
fps = 25
# Main display is where all the magic happens.
main {
# Type of display
type = "gp1294"
size = "256x48"
reset = "GPIO25"
bl = "GPIO24"
# Mode (spi or i2c)
mode = "spi"
# SPI settings
port = "spi0.0"
#type = "ssd1322"
#size = "256x64"
#reset = "GPIO25"
#dc = "GPIO24"
#bl = "GPIO23"
# I2C settings
#addr = "3c"
#bus = "" # default bus
}
## If you don't have one big 256x64 display, you can glue two 128x64 displays
## together logically (much cheaper):
#left {
# type = "ssd1306"
# addr = "3c"
# size = "128x64"
#}
#right {
# type = "ssd1306"
# addr = "3d"
# size = "128x64"
#}
# If you have a separate (color) display for displaying album art. If not, the
# main display will use a 64x64 area for showing album art.
#meta {
# type = "st7789"
# size = "240x240"
# port = "" # SPI0.0
# reset = "GPIO23" # reset pin
# dc = "GPIO24" # data control pin
# bl = "GPIO27" # backlight pin
#}
}
# Screen configuration.
screen {
# Default "now playing" screen
playing {
# Spectrum analyzer
spectrum {
# Min and max frequency
min = 100
max = 15000
# Peak hold (-1 to disable).
hold = 20
# DSP window function (blackman, hamming, hann or none).
window = "blackman"
# Display waterfall instead of bars.
waterfall = false
}
# Format display (format, duration & progress) line.
format {
# Font file.
font = "Hack-Regular.ttf"
}
# Track display (artist & title) line.
track {
# Text color.
color = "white"
# Font file.
font = "./SourceSansPro-ExtraLight.ttf"
# Font size.
#font_size = 32
# Font DPI.
#dpi = 96
# Font hinting (none, vertical or full).
hinting = "full"
}
}
# Full screen stereo spectrum analyzer
spectrum {
# Min and max frequency
min = 100
max = 15000
# Peak hold.
hold = 20
# DSP window function.
window = "blackman"
}
# Full screen VU meters
vumeter {
}
}
# Input for controlling the display.
input {
# Rotary encoder.
encoder {
# The rotary is configured as input device.
#
# On Raspberry Pi, this can be done by adding the following line
# to /boot/config.txt:
#
# # Rotary encoder on GPIO6 & GPIO13
# dtoverlay=rotary-encoder,pin_a=6,pin_b=13,relative_axis=1,steps-per-period=2
#
# # Rotary push button, KEY_MUTE on GPIO15
# dtoverlay=gpio-key,gpio=5,label="rotary-switch",keycode=113
type = "input"
#type = "gpio"
#cw = "GPIOx" # clock wise pulse pin
#ccw = "GPIOx" # counter clock wise pulse pin
#sw = "GPIO5" # switch pin
}
}
# Player controls the music.
player {
# Auto detect the player.
type = "auto"
## rAudio (also detected automatically on local installations)
# type = "raudio"
# host = "localhost:6600"
## Music Player Daemon
# type = "mpd"
# host = "localhost:6600"
# password = ""
}
# Audio is the source of audio samples.
audio {
# Type of audio stream. Currently supported are file or fifo.
type = "fifo"
# Path to the audio stream.
path = "/tmp/beatglow.fifo"
# MPD output name (optional when MPD has exactly one FIFO output).
# Must match the name of the output writing to the path above.
# output = "BeatGlow"
# Rate is the sampling rate.
rate = 44100
# Channels are the number of audio channels.
channels = 2
# Bits per sample.
bits = 16
# Big Endian decoding (default: use Little Endian).
#be = true
# Delay can compensate for timing differences between your DAC and reading samples
# from the audio source; use this if the visualisations are ahead of the audio.
delay = "25ms"
}
# Mixer for controlling the volume.
mixer {
# Type of mixer (alsa).
type = "alsa"
# Put your card here, you can list them by using: aplay -l
card = 5
}