add91bb47b
- Add complete KISS protocol Port 2 command handler supporting all 14 commands: GET/SET_RADIO, GET/SET_FREQUENCY, GET/SET_BANDWIDTH, GET/SET_SF, GET/SET_CR, GET/SET_POWER, GET/SET_SYNCWORD - Commands return RES_OK (0x01) or RES_ERROR (0x02) with appropriate payloads - Responses encoded as KISS frames on Port 2 - All parameters use big-endian encoding per PROJECT.md specification - Preserves syncword when setting other parameters via SET_RADIO Verified: Both seeed_xiao_s3_wio_sx1262 and heltec_v3 build without warnings.
61 lines
2.0 KiB
INI
61 lines
2.0 KiB
INI
; Root PlatformIO configuration for LoRa KISS modem (20 boards)
|
|
; Board-specific environments are in hardware/<vendor>/<board>/platformio.ini
|
|
; SoC shared settings are in soc/<soc>/platformio.ini
|
|
|
|
[platformio]
|
|
default_envs =
|
|
heltec_v3
|
|
rak_rak4631
|
|
heltec_v2
|
|
|
|
extra_configs =
|
|
soc/esp32/platformio.ini
|
|
soc/esp32s3/platformio.ini
|
|
soc/nrf52/platformio.ini
|
|
hardware/heltec/t114/platformio.ini
|
|
hardware/heltec/ct62/platformio.ini
|
|
hardware/heltec/e213/platformio.ini
|
|
hardware/heltec/e290/platformio.ini
|
|
hardware/heltec/mesh_solar/platformio.ini
|
|
hardware/heltec/t190/platformio.ini
|
|
hardware/heltec/tracker/platformio.ini
|
|
hardware/heltec/tracker_v2/platformio.ini
|
|
hardware/heltec/v2/platformio.ini
|
|
hardware/heltec/v3/platformio.ini
|
|
hardware/heltec/v4/platformio.ini
|
|
hardware/lilygo/t_beam_1w/platformio.ini
|
|
hardware/lilygo/t_beam_sx1262/platformio.ini
|
|
hardware/lilygo/t_beam_sx1276/platformio.ini
|
|
hardware/lilygo/t_beam_supreme/platformio.ini
|
|
hardware/seeed/xiao_s3_wio_sx1262/platformio.ini
|
|
hardware/rak/rak11310/platformio.ini
|
|
hardware/rak/rak3112/platformio.ini
|
|
hardware/rak/rak3401/platformio.ini
|
|
hardware/rak/rak3x72/platformio.ini
|
|
hardware/rak/rak4631/platformio.ini
|
|
|
|
; ------------------------------------------------------------------
|
|
; Base environment — all board envs extend this.
|
|
; Provides: RadioLib dependency, default LoRa parameters.
|
|
; ------------------------------------------------------------------
|
|
[env:base]
|
|
lib_deps =
|
|
jgromes/RadioLib@^6.6.0
|
|
|
|
monitor_speed = 115200
|
|
|
|
build_flags =
|
|
; Treat warnings as errors in our code, but not in third-party
|
|
-Wall -Werror -Wno-error=unused-function
|
|
; C99 for KISS implementation
|
|
-std=c99
|
|
; Default LoRa radio parameters — override per-board as needed
|
|
-DLORA_FREQ_KHZ=868000UL
|
|
-DLORA_BW_HZ=125000UL
|
|
-DLORA_SF=7
|
|
-DLORA_CR=5
|
|
-DLORA_POWER_DBM=14
|
|
-DLORA_SYNCWORD=0x34
|
|
; KISS serial baud rate
|
|
-DKISS_BAUD=115200
|