ham/loramodem
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
45d1364a71bb9e9205b82b912b9f084fe2e59252
loramodem/build/zephyr/.config
maze 45d1364a71 Add XIAO Wio-SX1262 overlay; support SX12xx bandwidths (including 62.5 kHz) as default 
- boards/seeed/xiao_wio_sx1262: add overlay, .conf, board.yml
- app: support full set of SX12xx bandwidths; default BW set to 62 (62.5 kHz)
- Update Kconfig and prj.conf
- Update lora_modem.h/c for validation and mapping
2026-03-26 13:01:47 +01:00

2105 lines
57 KiB
Plaintext
Raw Blame History

#
# Devicetree Info
#
CONFIG_DT_HAS_ESPRESSIF_ESP32_AES_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_BT_HCI_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_CLOCK_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_FLASH_CONTROLLER_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_GPIO_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_I2C_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_INTC_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_LCD_CAM_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_PINCTRL_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_PSRAM_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_SDHC_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_SHA_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_SPI_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_TIMER_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_TRNG_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_UART_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_USB_SERIAL_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_WATCHDOG_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_ESP32_WIFI_ENABLED=y
CONFIG_DT_HAS_ESPRESSIF_XTENSA_LX7_ENABLED=y
CONFIG_DT_HAS_FIXED_PARTITIONS_ENABLED=y
CONFIG_DT_HAS_GPIO_LEDS_ENABLED=y
CONFIG_DT_HAS_MMIO_SRAM_ENABLED=y
CONFIG_DT_HAS_SEEED_XIAO_GPIO_ENABLED=y
CONFIG_DT_HAS_SEMTECH_SX1262_ENABLED=y
CONFIG_DT_HAS_SOC_NV_FLASH_ENABLED=y
CONFIG_DT_HAS_ZEPHYR_MEMORY_REGION_ENABLED=y
CONFIG_DT_HAS_ZEPHYR_POWER_STATE_ENABLED=y
# end of Devicetree Info
# CONFIG_INPUT is not set
# CONFIG_WIFI is not set
CONFIG_MAIN_STACK_SIZE=2048
# CONFIG_REGULATOR is not set
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=1024
# CONFIG_FPU is not set
CONFIG_SERIAL=y
CONFIG_SPI=y
# CONFIG_MIPI_DSI is not set
# CONFIG_MEMC is not set
# CONFIG_MODEM is not set
CONFIG_UART_INTERRUPT_DRIVEN=y
# CONFIG_GPIO_HOGS is not set
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=240000000
CONFIG_FLASH_SIZE=8388608
CONFIG_FLASH_BASE_ADDRESS=0x0
CONFIG_MP_MAX_NUM_CPUS=1
# CONFIG_SOC_RESET_HOOK is not set
CONFIG_CLOCK_CONTROL=y
CONFIG_IDLE_STACK_SIZE=1024
CONFIG_ISR_STACK_SIZE=2048
CONFIG_SYS_CLOCK_TICKS_PER_SEC=10000
CONFIG_BUILD_OUTPUT_BIN=y
CONFIG_ROM_START_OFFSET=0
CONFIG_KERNEL_ENTRY="__start"
# CONFIG_XIP is not set
CONFIG_HAS_FLASH_LOAD_OFFSET=y
# CONFIG_COUNTER is not set
# CONFIG_SHARED_INTERRUPTS is not set
# CONFIG_PM_DEVICE is not set
# CONFIG_OTP is not set
# CONFIG_NVMEM is not set
CONFIG_TICKLESS_KERNEL=y
CONFIG_CLOCK_CONTROL_INIT_PRIORITY=30
# CONFIG_USE_DT_CODE_PARTITION is not set
# CONFIG_MULTI_LEVEL_INTERRUPTS is not set
# CONFIG_PM is not set
CONFIG_NUM_METAIRQ_PRIORITIES=0
# CONFIG_POWER_DOMAIN is not set
CONFIG_NUM_PREEMPT_PRIORITIES=15
# CONFIG_BUILD_OUTPUT_HEX is not set
# CONFIG_GEN_IRQ_VECTOR_TABLE is not set
CONFIG_DYNAMIC_INTERRUPTS=y
CONFIG_GEN_ISR_TABLES=y
# CONFIG_INIT_STACKS is not set
CONFIG_TIMESLICE_SIZE=20
CONFIG_FLASH_LOAD_OFFSET=0x0
CONFIG_SYS_CLOCK_EXISTS=y
# CONFIG_BUILD_OUTPUT_S19 is not set
# CONFIG_FLASH is not set
# CONFIG_CODE_DATA_RELOCATION is not set
# CONFIG_SYSTEM_TIMER_RESET_BY_LPM is not set
CONFIG_GPIO=y
# CONFIG_SYSTEM_CLOCK_HW_CYCLES_PER_SEC_RUNTIME_UPDATE is not set
# CONFIG_MFD is not set
# CONFIG_SMP is not set
CONFIG_XTENSA_TIMER=y
CONFIG_XTENSA_CCOUNT_HZ=240000000
# CONFIG_CACHE is not set
CONFIG_LOG=y
# CONFIG_PM_CPU_OPS is not set
# CONFIG_RESET is not set
CONFIG_ARCH_SW_ISR_TABLE_ALIGN=4
CONFIG_LOG_DOMAIN_NAME=""
# CONFIG_ASSERT is not set
CONFIG_LOG_PROCESS_THREAD_STACK_SIZE=1024
# CONFIG_DEVICE_DEPS is not set
CONFIG_UART_USE_RUNTIME_CONFIGURE=y
# CONFIG_SYSCON is not set
# CONFIG_SOC_EARLY_INIT_HOOK is not set
# CONFIG_XTENSA_SMALL_VECTOR_TABLE_ENTRY is not set
# CONFIG_XTENSA_USE_CORE_CRT1 is not set
CONFIG_CONSOLE=y
# CONFIG_WINSTREAM is not set
CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE=-1
CONFIG_SOC_TOOLCHAIN_NAME="espressif_esp32s3"
# CONFIG_XTENSA_RESET_VECTOR is not set
CONFIG_GEN_SW_ISR_TABLE=y
# CONFIG_REBOOT is not set
CONFIG_GEN_IRQ_START_VECTOR=0
CONFIG_SRAM_OFFSET=0
CONFIG_XTENSA_TIMER_ID=0
CONFIG_XTAL_FREQ_HZ=40000000
CONFIG_SOC_FLASH_ESP32=y
# CONFIG_BOOTLOADER_MCUBOOT is not set
# CONFIG_SCHED_CPU_MASK is not set
CONFIG_KERNEL_MEM_POOL=y
CONFIG_MULTITHREADING=y
# CONFIG_OUTPUT_DISASSEMBLY is not set
CONFIG_LINKER_USE_RELAX=y
# CONFIG_WATCHDOG is not set
#
# Modules
#
# CONFIG_BUILD_ONLY_NO_BLOBS is not set
#
# Available modules.
#
#
# acpica (/Users/wijnand/zephyrproject/modules/lib/acpica)
#
#
# ACPI driver support
#
# CONFIG_ACPI is not set
# end of ACPI driver support
CONFIG_ZEPHYR_ACPICA_MODULE=y
# end of acpica (/Users/wijnand/zephyrproject/modules/lib/acpica)
#
# cmsis (/Users/wijnand/zephyrproject/modules/hal/cmsis)
#
CONFIG_ZEPHYR_CMSIS_MODULE=y
# end of cmsis (/Users/wijnand/zephyrproject/modules/hal/cmsis)
#
# cmsis-dsp (/Users/wijnand/zephyrproject/modules/lib/cmsis-dsp)
#
CONFIG_ZEPHYR_CMSIS_DSP_MODULE=y
# CONFIG_CMSIS_DSP is not set
# end of cmsis-dsp (/Users/wijnand/zephyrproject/modules/lib/cmsis-dsp)
#
# cmsis-nn (/Users/wijnand/zephyrproject/modules/lib/cmsis-nn)
#
CONFIG_ZEPHYR_CMSIS_NN_MODULE=y
# end of cmsis-nn (/Users/wijnand/zephyrproject/modules/lib/cmsis-nn)
#
# cmsis_6 (/Users/wijnand/zephyrproject/modules/hal/cmsis_6)
#
CONFIG_ZEPHYR_CMSIS_6_MODULE=y
# end of cmsis_6 (/Users/wijnand/zephyrproject/modules/hal/cmsis_6)
#
# dhara (/Users/wijnand/zephyrproject/modules/lib/dhara)
#
CONFIG_ZEPHYR_DHARA_MODULE=y
# end of dhara (/Users/wijnand/zephyrproject/modules/lib/dhara)
#
# fatfs (/Users/wijnand/zephyrproject/modules/fs/fatfs)
#
CONFIG_ZEPHYR_FATFS_MODULE=y
# end of fatfs (/Users/wijnand/zephyrproject/modules/fs/fatfs)
CONFIG_ZEPHYR_ADI_MODULE=y
#
# hal_afbr (/Users/wijnand/zephyrproject/modules/hal/afbr)
#
CONFIG_ZEPHYR_HAL_AFBR_MODULE=y
# end of hal_afbr (/Users/wijnand/zephyrproject/modules/hal/afbr)
#
# hal_ambiq (/Users/wijnand/zephyrproject/modules/hal/ambiq)
#
CONFIG_ZEPHYR_HAL_AMBIQ_MODULE=y
# end of hal_ambiq (/Users/wijnand/zephyrproject/modules/hal/ambiq)
CONFIG_ZEPHYR_ATMEL_MODULE=y
#
# hal_bouffalolab (/Users/wijnand/zephyrproject/modules/hal/bouffalolab)
#
CONFIG_ZEPHYR_HAL_BOUFFALOLAB_MODULE=y
# end of hal_bouffalolab (/Users/wijnand/zephyrproject/modules/hal/bouffalolab)
#
# hal_espressif (/Users/wijnand/zephyrproject/modules/hal/espressif)
#
# CONFIG_ESP_HAL_LOG_LEVEL_OFF is not set
# CONFIG_ESP_HAL_LOG_LEVEL_ERR is not set
# CONFIG_ESP_HAL_LOG_LEVEL_WRN is not set
# CONFIG_ESP_HAL_LOG_LEVEL_INF is not set
# CONFIG_ESP_HAL_LOG_LEVEL_DBG is not set
CONFIG_ESP_HAL_LOG_LEVEL_DEFAULT=y
CONFIG_ESP_HAL_LOG_LEVEL=3
CONFIG_ESP_HAL_EARLY_LOG_LEVEL=3
CONFIG_ESP_PLATFORM=y
CONFIG_SOC_ADC_SUPPORTED=y
CONFIG_SOC_UART_SUPPORTED=y
CONFIG_SOC_MCPWM_SUPPORTED=y
CONFIG_SOC_GPTIMER_SUPPORTED=y
CONFIG_SOC_SDMMC_HOST_SUPPORTED=y
CONFIG_SOC_BT_SUPPORTED=y
CONFIG_SOC_PCNT_SUPPORTED=y
CONFIG_SOC_PHY_SUPPORTED=y
CONFIG_SOC_WIFI_SUPPORTED=y
CONFIG_SOC_TWAI_SUPPORTED=y
CONFIG_SOC_EFUSE_SUPPORTED=y
CONFIG_SOC_ULP_SUPPORTED=y
CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y
CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y
CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y
CONFIG_SOC_RTC_MEM_SUPPORTED=y
CONFIG_SOC_RTC_TIMER_V1_SUPPORTED=y
CONFIG_SOC_I2S_SUPPORTED=y
CONFIG_SOC_LCD_I80_SUPPORTED=y
CONFIG_SOC_RMT_SUPPORTED=y
CONFIG_SOC_SDM_SUPPORTED=y
CONFIG_SOC_GPSPI_SUPPORTED=y
CONFIG_SOC_LEDC_SUPPORTED=y
CONFIG_SOC_I2C_SUPPORTED=y
CONFIG_SOC_SUPPORT_COEXISTENCE=y
CONFIG_SOC_AES_SUPPORTED=y
CONFIG_SOC_MPI_SUPPORTED=y
CONFIG_SOC_SHA_SUPPORTED=y
CONFIG_SOC_FLASH_ENC_SUPPORTED=y
CONFIG_SOC_SECURE_BOOT_SUPPORTED=y
CONFIG_SOC_TOUCH_SENSOR_SUPPORTED=y
CONFIG_SOC_BOD_SUPPORTED=y
CONFIG_SOC_ULP_FSM_SUPPORTED=y
CONFIG_SOC_CLK_TREE_SUPPORTED=y
CONFIG_SOC_MPU_SUPPORTED=y
CONFIG_SOC_WDT_SUPPORTED=y
CONFIG_SOC_SPI_FLASH_SUPPORTED=y
CONFIG_SOC_RNG_SUPPORTED=y
CONFIG_SOC_LIGHT_SLEEP_SUPPORTED=y
CONFIG_SOC_DEEP_SLEEP_SUPPORTED=y
CONFIG_SOC_LP_PERIPH_SHARE_INTERRUPT=y
CONFIG_SOC_PM_SUPPORTED=y
CONFIG_SOC_SPI_EXTERNAL_NOR_FLASH_SUPPORTED=y
CONFIG_SOC_XTAL_SUPPORT_40M=y
CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y
CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y
CONFIG_SOC_ADC_DMA_SUPPORTED=y
CONFIG_SOC_ADC_PERIPH_NUM=2
CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10
CONFIG_SOC_ADC_ATTEN_NUM=4
CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2
CONFIG_SOC_ADC_PATT_LEN_MAX=24
CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=12
CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12
CONFIG_SOC_ADC_DIGI_RESULT_BYTES=4
CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV=4
CONFIG_SOC_ADC_DIGI_MONITOR_NUM=2
CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=83333
CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=611
CONFIG_SOC_ADC_RTC_MIN_BITWIDTH=12
CONFIG_SOC_ADC_RTC_MAX_BITWIDTH=12
CONFIG_SOC_ADC_SHARED_POWER=y
CONFIG_SOC_BROWNOUT_RESET_SUPPORTED=y
CONFIG_SOC_CPU_CORES_NUM=2
CONFIG_SOC_CPU_INTR_NUM=32
CONFIG_SOC_CPU_HAS_FPU=y
CONFIG_SOC_HP_CPU_HAS_MULTIPLE_CORES=y
CONFIG_SOC_CPU_BREAKPOINTS_NUM=2
CONFIG_SOC_CPU_WATCHPOINTS_NUM=2
CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=0x40
CONFIG_SOC_GPIO_PORT=1
CONFIG_SOC_GPIO_PIN_COUNT=49
CONFIG_SOC_GPIO_VALID_GPIO_MASK=0x1FFFFFFFFFFFF
CONFIG_SOC_GPIO_IN_RANGE_MAX=48
CONFIG_SOC_GPIO_OUT_RANGE_MAX=48
CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0x0001FFFFFC000000
CONFIG_SOC_GPIO_CLOCKOUT_BY_IO_MUX=y
CONFIG_SOC_GPIO_CLOCKOUT_CHANNEL_NUM=3
CONFIG_SOC_I2C_NUM=2
CONFIG_SOC_HP_I2C_NUM=2
CONFIG_SOC_I2C_SUPPORT_10BIT_ADDR=y
CONFIG_SOC_I2C_SUPPORT_SLAVE=y
CONFIG_SOC_I2S_SUPPORTS_PDM=y
CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y
CONFIG_SOC_I2S_SUPPORTS_PCM2PDM=y
CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y
CONFIG_SOC_I2S_SUPPORTS_PDM2PCM=y
CONFIG_SOC_I2S_PDM_MAX_TX_LINES=2
CONFIG_SOC_I2S_PDM_MAX_RX_LINES=4
CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y
CONFIG_SOC_LEDC_TIMER_NUM=4
CONFIG_SOC_LEDC_CHANNEL_NUM=8
CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=14
CONFIG_SOC_MMU_PERIPH_NUM=1
CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM=1
CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=48
CONFIG_SOC_RTCIO_PIN_COUNT=22
CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y
CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y
CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y
CONFIG_SOC_SPI_PERIPH_NUM=3
CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64
CONFIG_SOC_LP_TIMER_BIT_WIDTH_LO=32
CONFIG_SOC_LP_TIMER_BIT_WIDTH_HI=16
CONFIG_SOC_TOUCH_SENSOR_VERSION=2
CONFIG_SOC_TOUCH_MIN_CHAN_ID=1
CONFIG_SOC_TOUCH_MAX_CHAN_ID=14
CONFIG_SOC_TOUCH_SUPPORT_SLEEP_WAKEUP=y
CONFIG_SOC_TOUCH_SAMPLE_CFG_NUM=1
CONFIG_SOC_TWAI_CONTROLLER_NUM=1
CONFIG_SOC_TWAI_MASK_FILTER_NUM=1
CONFIG_SOC_UART_NUM=3
CONFIG_SOC_UART_HP_NUM=3
CONFIG_SOC_UART_SUPPORT_APB_CLK=y
CONFIG_SOC_UART_FIFO_LEN=128
CONFIG_SOC_UART_BITRATE_MAX=5000000
CONFIG_SOC_UART_WAKEUP_SUPPORT_ACTIVE_THRESH_MODE=y
CONFIG_SOC_SPIRAM_SUPPORTED=y
CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
CONFIG_SOC_SHA_SUPPORT_SHA1=y
CONFIG_SOC_SHA_SUPPORT_SHA256=y
CONFIG_SOC_SHA_SUPPORT_SHA384=y
CONFIG_SOC_SHA_SUPPORT_SHA512=y
CONFIG_SOC_MPI_MEM_BLOCKS_NUM=4
CONFIG_SOC_MPI_OPERATIONS_NUM=3
CONFIG_SOC_RSA_MAX_BIT_LEN=4096
CONFIG_SOC_AES_SUPPORT_AES_128=y
CONFIG_SOC_AES_SUPPORT_AES_256=y
CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=3
CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=64
CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21
CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD=y
CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y
CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y
CONFIG_SOC_PM_SUPPORT_MODEM_PD=y
CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y
CONFIG_SOC_PM_MODEM_PD_BY_SW=y
CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y
CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y
CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y
CONFIG_SOC_CLK_XTAL32K_SUPPORTED=y
CONFIG_SOC_SDMMC_NUM_SLOTS=2
CONFIG_SOC_SDMMC_DATA_WIDTH_MAX=8
CONFIG_SOC_WIFI_WAPI_SUPPORT=y
CONFIG_SOC_WIFI_CSI_SUPPORT=y
CONFIG_SOC_WIFI_MESH_SUPPORT=y
CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW=y
CONFIG_SOC_BLE_SUPPORTED=y
CONFIG_SOC_BLE_MESH_SUPPORTED=y
CONFIG_SOC_BLE_DEVICE_PRIVACY_SUPPORTED=y
CONFIG_SOC_BLUFI_SUPPORTED=y
CONFIG_SOC_ULP_HAS_ADC=y
CONFIG_SOC_PHY_COMBO_MODULE=y
CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y
CONFIG_SOC_SUPPORTS_SECURE_DL_MODE=y
CONFIG_SOC_RISCV_COPROC_SUPPORTED=y
CONFIG_SOC_USB_OTG_SUPPORTED=y
CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED=y
CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD=y
CONFIG_SOC_TEMP_SENSOR_SUPPORTED=y
CONFIG_SOC_CACHE_SUPPORT_WRAP=y
CONFIG_SOC_PSRAM_DMA_CAPABLE=y
CONFIG_SOC_XT_WDT_SUPPORTED=y
CONFIG_SOC_SYSTIMER_SUPPORTED=y
CONFIG_SOC_HMAC_SUPPORTED=y
CONFIG_SOC_DIG_SIGN_SUPPORTED=y
CONFIG_SOC_MEMPROT_SUPPORTED=y
CONFIG_SOC_ADC_ARBITER_SUPPORTED=y
CONFIG_SOC_ADC_DIG_IIR_FILTER_SUPPORTED=y
CONFIG_SOC_ADC_MONITOR_SUPPORTED=y
CONFIG_SOC_ADC_DIGI_IIR_FILTER_NUM=2
CONFIG_SOC_ADC_CALIBRATION_V1_SUPPORTED=y
CONFIG_SOC_ADC_SELF_HW_CALI_SUPPORTED=y
CONFIG_SOC_CACHE_WRITEBACK_SUPPORTED=y
CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=4096
CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH=16
CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US=1100
CONFIG_SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER=y
CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD=y
CONFIG_SOC_I2C_SLAVE_CAN_GET_STRETCH_CAUSE=y
CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK=y
CONFIG_SOC_LEDC_SUPPORT_FADE_STOP=y
CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT=y
CONFIG_SOC_LP_IO_CLOCK_IS_INDEPENDENT=y
CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2=y
CONFIG_SOC_SPI_SUPPORT_OCT=y
CONFIG_SOC_MEMSPI_SUPPORT_CONTROL_DUMMY_OUT=y
CONFIG_SOC_MEMSPI_IS_INDEPENDENT=y
CONFIG_SOC_TOUCH_SUPPORT_BENCHMARK=y
CONFIG_SOC_TOUCH_SUPPORT_WATERPROOF=y
CONFIG_SOC_TOUCH_SUPPORT_PROX_SENSING=y
CONFIG_SOC_TOUCH_SUPPORT_DENOISE_CHAN=y
CONFIG_SOC_TOUCH_PROXIMITY_CHANNEL_NUM=3
CONFIG_SOC_UART_SUPPORT_WAKEUP_INT=y
CONFIG_SOC_SPIRAM_XIP_SUPPORTED=y
CONFIG_SOC_USB_OTG_PERIPH_NUM=1
CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE=3968
CONFIG_SOC_SHA_SUPPORT_DMA=y
CONFIG_SOC_SHA_SUPPORT_RESUME=y
CONFIG_SOC_SHA_SUPPORT_SHA224=y
CONFIG_SOC_SHA_SUPPORT_SHA512_224=y
CONFIG_SOC_SHA_SUPPORT_SHA512_256=y
CONFIG_SOC_SHA_SUPPORT_SHA512_T=y
CONFIG_SOC_AES_SUPPORT_DMA=y
CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE=y
CONFIG_SOC_EFUSE_DIS_DOWNLOAD_DCACHE=y
CONFIG_SOC_EFUSE_HARD_DIS_JTAG=y
CONFIG_SOC_EFUSE_SOFT_DIS_JTAG=y
CONFIG_SOC_EFUSE_DIS_ICACHE=y
CONFIG_SOC_EFUSE_XTS_AES_KEY_128=y
CONFIG_SOC_EFUSE_XTS_AES_KEY_256=y
CONFIG_SOC_SECURE_BOOT_V2_RSA=y
CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS=y
CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY=y
CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES=y
CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_OPTIONS=y
CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128=y
CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_256=y
CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE=16
CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE=256
CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH=12
CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE=y
CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND=y
CONFIG_SOC_SPI_MEM_SUPPORT_WRAP=y
CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP=y
CONFIG_SOC_COEX_HW_PTI=y
CONFIG_SOC_EXTERNAL_COEX_LEADER_TX_LINE=y
CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC=y
CONFIG_SOC_WIFI_HW_TSF=y
CONFIG_SOC_WIFI_FTM_SUPPORT=y
CONFIG_SOC_GDMA_SUPPORTED=y
CONFIG_SOC_UHCI_SUPPORTED=y
CONFIG_SOC_AHB_GDMA_SUPPORTED=y
CONFIG_SOC_LCDCAM_CAM_SUPPORTED=y
CONFIG_SOC_LCDCAM_I80_LCD_SUPPORTED=y
CONFIG_SOC_LCDCAM_RGB_LCD_SUPPORTED=y
CONFIG_SOC_LCD_RGB_SUPPORTED=y
CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED=y
CONFIG_SOC_SIMD_INSTRUCTION_SUPPORTED=y
CONFIG_SOC_APPCPU_HAS_CLOCK_GATING_BUG=y
CONFIG_SOC_APB_BACKUP_DMA=y
CONFIG_SOC_CACHE_FREEZE_SUPPORTED=y
CONFIG_SOC_CACHE_ACS_INVALID_STATE_ON_PANIC=y
CONFIG_SOC_SIMD_PREFERRED_DATA_ALIGNMENT=16
CONFIG_SOC_AHB_GDMA_VERSION=1
CONFIG_SOC_I2C_SUPPORT_XTAL=y
CONFIG_SOC_I2C_SUPPORT_RTC=y
CONFIG_SOC_I2C_SLAVE_SUPPORT_BROADCAST=y
CONFIG_SOC_I2S_HW_VERSION_2=y
CONFIG_SOC_I2S_SUPPORTS_PCM=y
CONFIG_SOC_I2S_SUPPORTS_TDM=y
CONFIG_SOC_MCPWM_SWSYNC_CAN_PROPAGATE=y
CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG=y
CONFIG_SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP=y
CONFIG_SOC_RMT_SUPPORT_DMA=y
CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH=128
CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=549
CONFIG_SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH=128
CONFIG_SOC_UART_SUPPORT_RTC_CLK=y
CONFIG_SOC_UART_SUPPORT_XTAL_CLK=y
CONFIG_SOC_UHCI_NUM=1
CONFIG_SOC_SHA_GDMA=y
CONFIG_SOC_AES_GDMA=y
CONFIG_SOC_PM_SUPPORT_BT_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_CPU_PD=y
CONFIG_SOC_PM_SUPPORT_TAGMEM_PD=y
CONFIG_SOC_PM_SUPPORT_MAC_BB_PD=y
CONFIG_SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY=y
CONFIG_SOC_PM_CPU_RETENTION_BY_RTCCNTL=y
CONFIG_SOC_PM_MODEM_RETENTION_BY_BACKUPDMA=y
CONFIG_SOC_CLK_LP_FAST_SUPPORT_XTAL_D2=y
CONFIG_SOC_EFUSE_DIS_USB_JTAG=y
CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT=y
CONFIG_SOC_EFUSE_BLOCK9_KEY_PURPOSE_QUIRK=y
CONFIG_SOC_MAC_BB_PD_MEM_SIZE=192
CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND=y
CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME=y
CONFIG_SOC_SPI_MEM_SUPPORT_FLASH_OPI_MODE=y
CONFIG_SOC_SPI_MEM_SUPPORT_TIMING_TUNING=y
CONFIG_SOC_MEMSPI_TIMING_TUNING_BY_MSPI_DELAY=y
CONFIG_SOC_MEMSPI_CORE_CLK_SHARED_WITH_PSRAM=y
CONFIG_SOC_SPI_MEM_SUPPORT_CACHE_32BIT_ADDR_MAP=y
CONFIG_SOC_SPI_MEM_FLASH_SUPPORT_HPM=y
CONFIG_SOC_SDMMC_USE_GPIO_MATRIX=y
CONFIG_SOC_SDMMC_DELAY_PHASE_NUM=4
CONFIG_SOC_WIFI_GCMP_SUPPORT=y
CONFIG_SOC_WIFI_TXOP_SUPPORT=y
CONFIG_SOC_WIFI_PHY_NEEDS_USB_WORKAROUND=y
CONFIG_SOC_BLE_50_SUPPORTED=y
CONFIG_SOC_LCDCAM_CAM_SUPPORT_RGB_YUV_CONV=y
CONFIG_XTAL_FREQ=40
CONFIG_XTAL_FREQ_40=y
CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x0
CONFIG_BOOTLOADER_CPU_CLK_FREQ_MHZ=80
CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=240
CONFIG_ESP_CLK_FREQ_HZ=240000000
CONFIG_ESP_CONSOLE_ROM_SERIAL_PORT_NUM=4
CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
CONFIG_BOOTLOADER_LOG_LEVEL=3
CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL=5
CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE=y
CONFIG_IDF_TARGET_ARCH_XTENSA=y
CONFIG_SPI_FLASH_PLACE_FUNCTIONS_IN_IRAM=y
CONFIG_ESP_PHY_ENABLED=y
CONFIG_portNUM_PROCESSORS=2
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0009
CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY=y
CONFIG_IDF_TARGET_ESP32S3=y
CONFIG_ESP_TIMER_IMPL_SYSTIMER=y
#
# Wi-Fi config
#
CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y
# CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set
# end of Wi-Fi config
#
# Sleep config
#
CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY=2000
# end of Sleep config
CONFIG_ZEPHYR_HAL_ESPRESSIF_MODULE=y
# end of hal_espressif (/Users/wijnand/zephyrproject/modules/hal/espressif)
#
# hal_ethos_u (/Users/wijnand/zephyrproject/modules/hal/ethos_u)
#
# CONFIG_ETHOS_U is not set
CONFIG_ZEPHYR_HAL_ETHOS_U_MODULE=y
# end of hal_ethos_u (/Users/wijnand/zephyrproject/modules/hal/ethos_u)
#
# hal_gigadevice (/Users/wijnand/zephyrproject/modules/hal/gigadevice)
#
CONFIG_ZEPHYR_HAL_GIGADEVICE_MODULE=y
# end of hal_gigadevice (/Users/wijnand/zephyrproject/modules/hal/gigadevice)
#
# hal_infineon (/Users/wijnand/zephyrproject/modules/hal/infineon)
#
CONFIG_ZEPHYR_HAL_INFINEON_MODULE=y
# CONFIG_USE_INFINEON_ABSTRACTION_RTOS is not set
# end of hal_infineon (/Users/wijnand/zephyrproject/modules/hal/infineon)
#
# hal_intel (/Users/wijnand/zephyrproject/modules/hal/intel)
#
CONFIG_ZEPHYR_HAL_INTEL_MODULE=y
# end of hal_intel (/Users/wijnand/zephyrproject/modules/hal/intel)
CONFIG_ZEPHYR_MICROCHIP_MODULE=y
#
# hal_nordic (/Users/wijnand/zephyrproject/modules/hal/nordic)
#
CONFIG_ZEPHYR_HAL_NORDIC_MODULE=y
# end of hal_nordic (/Users/wijnand/zephyrproject/modules/hal/nordic)
CONFIG_ZEPHYR_NUVOTON_MODULE=y
#
# hal_nxp (/Users/wijnand/zephyrproject/modules/hal/nxp)
#
CONFIG_ZEPHYR_HAL_NXP_MODULE=y
# end of hal_nxp (/Users/wijnand/zephyrproject/modules/hal/nxp)
CONFIG_ZEPHYR_OPENISA_MODULE=y
CONFIG_ZEPHYR_QUICKLOGIC_MODULE=y
#
# hal_realtek (/Users/wijnand/zephyrproject/modules/hal/realtek)
#
CONFIG_ZEPHYR_HAL_REALTEK_MODULE=y
#
# realtek hal driver
#
# CONFIG_REALTEK_BEE_ADC is not set
# CONFIG_REALTEK_BEE_CAN is not set
# CONFIG_REALTEK_BEE_CODEC is not set
# CONFIG_REALTEK_BEE_DMA is not set
# CONFIG_REALTEK_BEE_GPIO is not set
# CONFIG_REALTEK_BEE_I2C is not set
# CONFIG_REALTEK_BEE_I2S is not set
# CONFIG_REALTEK_BEE_IR is not set
# CONFIG_REALTEK_BEE_KEYSCAN is not set
# CONFIG_REALTEK_BEE_MAC_802154 is not set
# CONFIG_REALTEK_BEE_NVIC is not set
# CONFIG_REALTEK_BEE_PINMUX is not set
# CONFIG_REALTEK_BEE_AON_QDEC is not set
# CONFIG_REALTEK_BEE_QDEC is not set
# CONFIG_REALTEK_BEE_RCC is not set
# CONFIG_REALTEK_BEE_RTC is not set
# CONFIG_REALTEK_BEE_SDHC is not set
# CONFIG_REALTEK_BEE_SPI is not set
# CONFIG_REALTEK_BEE_TIM is not set
# CONFIG_REALTEK_BEE_ENHTIM is not set
# CONFIG_REALTEK_BEE_UART is not set
# CONFIG_REALTEK_BEE_USB is not set
# CONFIG_REALTEK_BEE_USING_USB_HAL is not set
# CONFIG_REALTEK_BEE_AON_WDT is not set
# CONFIG_REALTEK_BEE_CORE_WDT is not set
# end of realtek hal driver
# CONFIG_USE_REALTEK_BEE_OS_INTERFACE is not set
# end of hal_realtek (/Users/wijnand/zephyrproject/modules/hal/realtek)
CONFIG_ZEPHYR_HAL_RENESAS_MODULE=y
#
# hal_rpi_pico (/Users/wijnand/zephyrproject/modules/hal/rpi_pico)
#
CONFIG_ZEPHYR_HAL_RPI_PICO_MODULE=y
# end of hal_rpi_pico (/Users/wijnand/zephyrproject/modules/hal/rpi_pico)
#
# hal_sifli (/Users/wijnand/zephyrproject/modules/hal/sifli)
#
CONFIG_ZEPHYR_HAL_SIFLI_MODULE=y
# end of hal_sifli (/Users/wijnand/zephyrproject/modules/hal/sifli)
#
# hal_silabs (/Users/wijnand/zephyrproject/modules/hal/silabs)
#
CONFIG_ZEPHYR_HAL_SILABS_MODULE=y
# end of hal_silabs (/Users/wijnand/zephyrproject/modules/hal/silabs)
#
# hal_st (/Users/wijnand/zephyrproject/modules/hal/st)
#
CONFIG_ZEPHYR_HAL_ST_MODULE=y
# end of hal_st (/Users/wijnand/zephyrproject/modules/hal/st)
CONFIG_ZEPHYR_HAL_STM32_MODULE=y
#
# hal_tdk (/Users/wijnand/zephyrproject/modules/hal/tdk)
#
CONFIG_ZEPHYR_HAL_TDK_MODULE=y
#
# TDK drivers
#
# CONFIG_TDK_HAL is not set
# end of TDK drivers
# end of hal_tdk (/Users/wijnand/zephyrproject/modules/hal/tdk)
#
# hal_telink (/Users/wijnand/zephyrproject/modules/hal/telink)
#
CONFIG_ZEPHYR_HAL_TELINK_MODULE=y
# end of hal_telink (/Users/wijnand/zephyrproject/modules/hal/telink)
CONFIG_ZEPHYR_TI_MODULE=y
#
# hal_wch (/Users/wijnand/zephyrproject/modules/hal/wch)
#
CONFIG_ZEPHYR_HAL_WCH_MODULE=y
# end of hal_wch (/Users/wijnand/zephyrproject/modules/hal/wch)
CONFIG_ZEPHYR_HAL_WURTHELEKTRONIK_MODULE=y
CONFIG_ZEPHYR_XTENSA_MODULE=y
#
# hostap (/Users/wijnand/zephyrproject/modules/lib/hostap)
#
# CONFIG_WIFI_NM_WPA_SUPPLICANT is not set
CONFIG_ZEPHYR_HOSTAP_MODULE=y
# end of hostap (/Users/wijnand/zephyrproject/modules/lib/hostap)
#
# liblc3 (/Users/wijnand/zephyrproject/modules/lib/liblc3)
#
CONFIG_ZEPHYR_LIBLC3_MODULE=y
# end of liblc3 (/Users/wijnand/zephyrproject/modules/lib/liblc3)
CONFIG_ZEPHYR_LIBMCTP_MODULE=y
CONFIG_ZEPHYR_LIBMETAL_MODULE=y
#
# libsbc (/Users/wijnand/zephyrproject/modules/lib/libsbc)
#
CONFIG_ZEPHYR_LIBSBC_MODULE=y
# CONFIG_LIBSBC is not set
# end of libsbc (/Users/wijnand/zephyrproject/modules/lib/libsbc)
#
# littlefs (/Users/wijnand/zephyrproject/modules/fs/littlefs)
#
CONFIG_ZEPHYR_LITTLEFS_MODULE=y
# end of littlefs (/Users/wijnand/zephyrproject/modules/fs/littlefs)
#
# lora-basics-modem (/Users/wijnand/zephyrproject/modules/lib/lora-basics-modem)
#
CONFIG_ZEPHYR_LORA_BASICS_MODEM_MODULE=y
# end of lora-basics-modem (/Users/wijnand/zephyrproject/modules/lib/lora-basics-modem)
#
# loramac-node (/Users/wijnand/zephyrproject/modules/lib/loramac-node)
#
CONFIG_ZEPHYR_LORAMAC_NODE_MODULE=y
CONFIG_HAS_SEMTECH_RADIO_DRIVERS=y
CONFIG_HAS_SEMTECH_SX126X=y
# CONFIG_HAS_SEMTECH_LORAMAC is not set
# end of loramac-node (/Users/wijnand/zephyrproject/modules/lib/loramac-node)
#
# lvgl (/Users/wijnand/zephyrproject/modules/lib/gui/lvgl)
#
CONFIG_ZEPHYR_LVGL_MODULE=y
# end of lvgl (/Users/wijnand/zephyrproject/modules/lib/gui/lvgl)
#
# mbedtls (/Users/wijnand/zephyrproject/modules/crypto/mbedtls)
#
CONFIG_ZEPHYR_MBEDTLS_MODULE=y
CONFIG_MBEDTLS_VERSION_4_x=y
# CONFIG_PSA_CRYPTO is not set
# CONFIG_MBEDTLS is not set
# end of mbedtls (/Users/wijnand/zephyrproject/modules/crypto/mbedtls)
CONFIG_ZEPHYR_MBEDTLS_3_6_MODULE=y
CONFIG_ZEPHYR_MCUBOOT_MODULE=y
CONFIG_ZEPHYR_MIPI_SYS_T_MODULE=y
#
# nanopb (/Users/wijnand/zephyrproject/modules/lib/nanopb)
#
CONFIG_ZEPHYR_NANOPB_MODULE=y
# CONFIG_NANOPB is not set
# end of nanopb (/Users/wijnand/zephyrproject/modules/lib/nanopb)
#
# nrf_wifi (/Users/wijnand/zephyrproject/modules/lib/nrf_wifi)
#
CONFIG_ZEPHYR_NRF_WIFI_MODULE=y
# CONFIG_NRF70_BUSLIB is not set
# end of nrf_wifi (/Users/wijnand/zephyrproject/modules/lib/nrf_wifi)
CONFIG_ZEPHYR_OPEN_AMP_MODULE=y
#
# openthread (/Users/wijnand/zephyrproject/modules/lib/openthread)
#
# CONFIG_OPENTHREAD is not set
CONFIG_ZEPHYR_OPENTHREAD_MODULE=y
# end of openthread (/Users/wijnand/zephyrproject/modules/lib/openthread)
#
# percepio (/Users/wijnand/zephyrproject/modules/debug/percepio)
#
#
# Percepio Tracealyzer support can be enabled from the tracing subsystem
#
# CONFIG_PERCEPIO_DFM is not set
CONFIG_ZEPHYR_PERCEPIO_MODULE=y
# end of percepio (/Users/wijnand/zephyrproject/modules/debug/percepio)
#
# picolibc (/Users/wijnand/zephyrproject/modules/lib/picolibc)
#
# CONFIG_PICOLIBC_MODULE is not set
CONFIG_ZEPHYR_PICOLIBC_MODULE=y
# end of picolibc (/Users/wijnand/zephyrproject/modules/lib/picolibc)
CONFIG_ZEPHYR_PSA_ARCH_TESTS_MODULE=y
#
# segger (/Users/wijnand/zephyrproject/modules/debug/segger)
#
CONFIG_ZEPHYR_SEGGER_MODULE=y
# end of segger (/Users/wijnand/zephyrproject/modules/debug/segger)
CONFIG_ZEPHYR_TF_M_TESTS_MODULE=y
CONFIG_ZEPHYR_TF_PSA_CRYPTO_MODULE=y
#
# trusted-firmware-a (/Users/wijnand/zephyrproject/modules/tee/tf-a/trusted-firmware-a)
#
CONFIG_ZEPHYR_TRUSTED_FIRMWARE_A_MODULE=y
# CONFIG_BUILD_WITH_TFA is not set
# end of trusted-firmware-a (/Users/wijnand/zephyrproject/modules/tee/tf-a/trusted-firmware-a)
#
# trusted-firmware-m (/Users/wijnand/zephyrproject/modules/tee/tf-m/trusted-firmware-m)
#
CONFIG_ZEPHYR_TRUSTED_FIRMWARE_M_MODULE=y
# end of trusted-firmware-m (/Users/wijnand/zephyrproject/modules/tee/tf-m/trusted-firmware-m)
#
# uoscore-uedhoc (/Users/wijnand/zephyrproject/modules/lib/uoscore-uedhoc)
#
CONFIG_ZEPHYR_UOSCORE_UEDHOC_MODULE=y
# end of uoscore-uedhoc (/Users/wijnand/zephyrproject/modules/lib/uoscore-uedhoc)
#
# zcbor (/Users/wijnand/zephyrproject/modules/lib/zcbor)
#
CONFIG_ZEPHYR_ZCBOR_MODULE=y
# CONFIG_ZCBOR is not set
# end of zcbor (/Users/wijnand/zephyrproject/modules/lib/zcbor)
CONFIG_ZEPHYR_NRF_HW_MODELS_MODULE=y
CONFIG_HAS_ESPRESSIF_HAL=y
# CONFIG_LIBMETAL is not set
# CONFIG_LVGL is not set
# CONFIG_HAS_MEC_HAL is not set
# CONFIG_HAS_MPFS_HAL is not set
# CONFIG_HAS_MEC5_HAL is not set
# CONFIG_OPENAMP is not set
# CONFIG_MIPI_SYST_LIB is not set
# CONFIG_HAS_TELINK_DRIVERS is not set
# CONFIG_MCUBOOT_BOOTUTIL_LIB is not set
#
# Unavailable modules, please install those via the project manifest.
#
#
# CANopenNode module not available.
#
#
# CHRE module not available.
#
#
# THRIFT module not available.
#
# end of Modules
CONFIG_BOARD="xiao_esp32s3"
CONFIG_BOARD_REVISION=""
CONFIG_BOARD_TARGET="xiao_esp32s3/esp32s3/procpu"
# CONFIG_NET_DRIVERS is not set
CONFIG_BOARD_XIAO_ESP32S3=y
CONFIG_BOARD_XIAO_ESP32S3_ESP32S3_PROCPU=y
CONFIG_BOARD_QUALIFIERS="esp32s3/procpu"
#
# Board Options
#
CONFIG_HEAP_MEM_POOL_ADD_SIZE_BOARD=4096
# end of Board Options
#
# Hardware Configuration
#
CONFIG_SOC="esp32s3"
CONFIG_SOC_SERIES="esp32s3"
CONFIG_SOC_FAMILY="espressif_esp32"
CONFIG_SOC_PART_NUMBER="ESP32S3_WROOM_N8R8"
# CONFIG_SOC_RTL8752HJL is not set
# CONFIG_SOC_RTL8752HMF is not set
# CONFIG_SOC_RTL8752HKF is not set
# CONFIG_SOC_RTL8752HJF is not set
CONFIG_SOC_FAMILY_ESPRESSIF_ESP32=y
CONFIG_SOC_SERIES_ESP32S3=y
CONFIG_SOC_ESP32S3_WROOM_N8R8=y
CONFIG_SOC_ESP32S3=y
CONFIG_SOC_ESP32S3_PROCPU=y
# CONFIG_HWINFO is not set
# CONFIG_BUILD_OUTPUT_INFO_HEADER is not set
CONFIG_GPIO_INIT_PRIORITY=40
# CONFIG_ESP32_USE_UNSUPPORTED_REVISION is not set
CONFIG_ESP_SIMPLE_BOOT=y
CONFIG_ESP32_TIMER_TASK_STACK_SIZE=4096
CONFIG_ESP32_TIMER_TASK_PRIO=3
CONFIG_ESP_CONSOLE_UART_NUM=4
CONFIG_ESP_CONSOLE_UART_BAUDRATE=1
CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM=4
CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG=y
CONFIG_ESP_CONSOLE=y
CONFIG_ESP_USB_SERIAL_JTAG_ENABLED=y
# CONFIG_ESP32_EFUSE_VIRTUAL is not set
CONFIG_ESP32_EFUSE_MAX_BLK_LEN=256
# CONFIG_ESP_SPIRAM is not set
# CONFIG_ESPTOOLPY_OCT_FLASH is not set
CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT=y
# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
CONFIG_ESPTOOLPY_FLASHMODE="dio"
# CONFIG_ESPTOOLPY_FLASHFREQ_120M is not set
CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
# CONFIG_ESPTOOLPY_FLASHFREQ_60M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_48M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT=y
CONFIG_ESPTOOLPY_FLASHFREQ="80m"
# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set
CONFIG_ESPTOOLPY_BEFORE_RESET=y
# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
CONFIG_ESPTOOLPY_AFTER="hard_reset"
CONFIG_MMU_PAGE_SIZE=0x10000
CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED=y
CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_TH_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_MXIC_OPI_CHIP=y
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
# CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE is not set
# CONFIG_MAC_BB_PD is not set
#
# Cache config
#
CONFIG_ESP32S3_INSTRUCTION_CACHE_16KB=y
# CONFIG_ESP32S3_INSTRUCTION_CACHE_32KB is not set
CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE=0x4000
# CONFIG_ESP32S3_INSTRUCTION_CACHE_4WAYS is not set
CONFIG_ESP32S3_INSTRUCTION_CACHE_8WAYS=y
CONFIG_ESP32S3_ICACHE_ASSOCIATED_WAYS=8
# CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_16B is not set
CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_32B=y
CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_SIZE=32
# CONFIG_ESP32S3_INSTRUCTION_CACHE_WRAP is not set
# CONFIG_ESP32S3_DATA_CACHE_16KB is not set
CONFIG_ESP32S3_DATA_CACHE_32KB=y
# CONFIG_ESP32S3_DATA_CACHE_64KB is not set
CONFIG_ESP32S3_DATA_CACHE_SIZE=0x8000
# CONFIG_ESP32S3_DATA_CACHE_4WAYS is not set
CONFIG_ESP32S3_DATA_CACHE_8WAYS=y
CONFIG_ESP32S3_DCACHE_ASSOCIATED_WAYS=8
# CONFIG_ESP32S3_DATA_CACHE_LINE_16B is not set
CONFIG_ESP32S3_DATA_CACHE_LINE_32B=y
# CONFIG_ESP32S3_DATA_CACHE_LINE_64B is not set
CONFIG_ESP32S3_DATA_CACHE_LINE_SIZE=32
# CONFIG_ESP32S3_DATA_CACHE_WRAP is not set
# end of Cache config
#
# MAC Config
#
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR=y
# CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_TWO is not set
CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_FOUR=y
CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES=4
# end of MAC Config
CONFIG_RESERVE_RTC_MEM=0
#
# Ultra Low Power (ULP) Coprocessor
#
# CONFIG_ESP32_ULP_COPROC_ENABLED is not set
#
# ULP Debugging Options
#
# end of ULP Debugging Options
# end of Ultra Low Power (ULP) Coprocessor
# CONFIG_SOC_LOG_LEVEL_OFF is not set
# CONFIG_SOC_LOG_LEVEL_ERR is not set
# CONFIG_SOC_LOG_LEVEL_WRN is not set
# CONFIG_SOC_LOG_LEVEL_INF is not set
# CONFIG_SOC_LOG_LEVEL_DBG is not set
CONFIG_SOC_LOG_LEVEL_DEFAULT=y
CONFIG_SOC_LOG_LEVEL=3
# end of Hardware Configuration
CONFIG_ARCH="xtensa"
#
# XTENSA Options
#
# CONFIG_SIMULATOR_XTENSA is not set
# CONFIG_XTENSA_MORE_SPIN_RELAX_NOPS is not set
# CONFIG_XTENSA_BREAK_ON_UNRECOVERABLE_EXCEPTIONS is not set
#
# Xtensa HiFi Options
#
# end of Xtensa HiFi Options
# CONFIG_XTENSA_INTERRUPT_NONPREEMPTABLE is not set
# end of XTENSA Options
CONFIG_XTENSA=y
CONFIG_ARCH_IS_SET=y
#
# General Architecture Options
#
# CONFIG_SEMIHOST is not set
# CONFIG_EXCEPTION_DUMP_HOOK is not set
# CONFIG_ARCH_LOG_LEVEL_OFF is not set
# CONFIG_ARCH_LOG_LEVEL_ERR is not set
# CONFIG_ARCH_LOG_LEVEL_WRN is not set
# CONFIG_ARCH_LOG_LEVEL_INF is not set
# CONFIG_ARCH_LOG_LEVEL_DBG is not set
CONFIG_ARCH_LOG_LEVEL_DEFAULT=y
CONFIG_ARCH_LOG_LEVEL=3
CONFIG_LITTLE_ENDIAN=y
CONFIG_SRAM_SIZE=416
CONFIG_SRAM_BASE_ADDRESS=0x3fc88000
# CONFIG_NOINIT_SNIPPET_FIRST is not set
# CONFIG_STACK_GROWS_UP is not set
# CONFIG_FRAME_POINTER is not set
#
# Interrupt Configuration
#
CONFIG_ARCH_DEVICE_STATE_ALIGN=4
CONFIG_SRAM_SW_ISR_TABLE=y
CONFIG_EXCEPTION_DEBUG=y
# CONFIG_SIMPLIFIED_EXCEPTION_CODES is not set
# end of Interrupt Configuration
# end of General Architecture Options
CONFIG_ARCH_HAS_TIMING_FUNCTIONS=y
CONFIG_ARCH_SUPPORTS_COREDUMP=y
CONFIG_ARCH_SUPPORTS_COREDUMP_STACK_PTR=y
CONFIG_ARCH_HAS_CODE_DATA_RELOCATION=y
CONFIG_CPU_HAS_FPU=y
CONFIG_ARCH_HAS_DIRECTED_IPIS=y
#
# DSP Options
#
# end of DSP Options
#
# Floating Point Options
#
# end of Floating Point Options
#
# Cache Options
#
# CONFIG_CACHE_DOUBLEMAP is not set
# end of Cache Options
CONFIG_TOOLCHAIN_HAS_BUILTIN_FFS=y
#
# General Kernel Options
#
# CONFIG_KERNEL_LOG_LEVEL_OFF is not set
# CONFIG_KERNEL_LOG_LEVEL_ERR is not set
# CONFIG_KERNEL_LOG_LEVEL_WRN is not set
# CONFIG_KERNEL_LOG_LEVEL_INF is not set
# CONFIG_KERNEL_LOG_LEVEL_DBG is not set
CONFIG_KERNEL_LOG_LEVEL_DEFAULT=y
CONFIG_KERNEL_LOG_LEVEL=3
CONFIG_NUM_COOP_PRIORITIES=16
CONFIG_MAIN_THREAD_PRIORITY=0
CONFIG_COOP_ENABLED=y
CONFIG_PREEMPT_ENABLED=y
CONFIG_PRIORITY_CEILING=-128
# CONFIG_SCHED_DEADLINE is not set
CONFIG_THREAD_STACK_INFO=y
# CONFIG_THREAD_CUSTOM_DATA is not set
# CONFIG_DYNAMIC_THREAD is not set
CONFIG_SCHED_SIMPLE=y
# CONFIG_SCHED_SCALABLE is not set
# CONFIG_SCHED_MULTIQ is not set
# CONFIG_WAITQ_SCALABLE is not set
CONFIG_WAITQ_SIMPLE=y
#
# Misc Kernel related options
#
CONFIG_ERRNO=y
# CONFIG_NONZERO_SPINLOCK_SIZE is not set
# end of Misc Kernel related options
#
# Kernel Debugging and Metrics
#
CONFIG_BOOT_BANNER=y
CONFIG_BOOT_BANNER_STRING="Booting Zephyr OS build"
CONFIG_BOOT_DELAY=0
# CONFIG_BOOT_CLEAR_SCREEN is not set
# CONFIG_THREAD_MONITOR is not set
# CONFIG_THREAD_NAME is not set
# CONFIG_THREAD_RUNTIME_STATS is not set
# CONFIG_THREAD_RUNTIME_STACK_SAFETY is not set
# end of Kernel Debugging and Metrics
# CONFIG_OBJ_CORE is not set
# CONFIG_WORKQUEUE_WORK_TIMEOUT is not set
#
# System Work Queue Options
#
CONFIG_SYSTEM_WORKQUEUE_PRIORITY=-1
# CONFIG_SYSTEM_WORKQUEUE_NO_YIELD is not set
CONFIG_SYSTEM_WORKQUEUE_WORK_TIMEOUT_MS=0
# end of System Work Queue Options
#
# Barrier Operations
#
# end of Barrier Operations
#
# Atomic Operations
#
CONFIG_ATOMIC_OPERATIONS_BUILTIN=y
# end of Atomic Operations
#
# Timer API Options
#
CONFIG_TIMESLICING=y
CONFIG_TIMESLICE_PRIORITY=0
# CONFIG_TIMESLICE_PER_THREAD is not set
# CONFIG_TIMER_OBSERVER is not set
# end of Timer API Options
#
# Other Kernel Object Options
#
CONFIG_POLL=y
# CONFIG_MEM_SLAB_POINTER_VALIDATE is not set
# CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION is not set
CONFIG_NUM_MBOX_ASYNC_MSGS=10
# CONFIG_EVENTS is not set
CONFIG_HEAP_MEM_POOL_SIZE=4096
# CONFIG_HEAP_MEM_POOL_IGNORE_MIN is not set
# end of Other Kernel Object Options
CONFIG_TIMEOUT_64BIT=y
CONFIG_SYS_CLOCK_MAX_TIMEOUT_DAYS=365
#
# Security Options
#
# end of Security Options
#
# Memory Domains
#
# end of Memory Domains
#
# SMP Options
#
CONFIG_USE_SWITCH=y
CONFIG_USE_SWITCH_SUPPORTED=y
# CONFIG_TICKET_SPINLOCKS is not set
# end of SMP Options
CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE=y
CONFIG_TOOLCHAIN_SUPPORTS_STATIC_INIT_GNU=y
# CONFIG_STATIC_INIT_GNU is not set
# CONFIG_BOOTARGS is not set
# end of General Kernel Options
#
# Device Options
#
# CONFIG_DEVICE_MUTABLE is not set
# CONFIG_DEVICE_DT_METADATA is not set
# CONFIG_DEVICE_DEINIT_SUPPORT is not set
# end of Device Options
#
# Initialization Priorities
#
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS=30
CONFIG_KERNEL_INIT_PRIORITY_LIBC=35
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40
CONFIG_KERNEL_INIT_PRIORITY_DEVICE=50
CONFIG_APPLICATION_INIT_PRIORITY=90
# end of Initialization Priorities
#
# Virtual Memory Support
#
#
# MMU Features
#
# end of MMU Features
# end of Virtual Memory Support
#
# SoC and Board Hooks
#
# CONFIG_SOC_EARLY_RESET_HOOK is not set
# CONFIG_SOC_PREP_HOOK is not set
# CONFIG_SOC_LATE_INIT_HOOK is not set
# CONFIG_SOC_PER_CORE_INIT_HOOK is not set
# CONFIG_BOARD_EARLY_INIT_HOOK is not set
# CONFIG_BOARD_LATE_INIT_HOOK is not set
# end of SoC and Board Hooks
#
# Device Drivers
#
# CONFIG_ADC is not set
# CONFIG_AUDIO is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_BBRAM is not set
# CONFIG_BIOMETRICS is not set
# CONFIG_CAN is not set
# CONFIG_CHARGER is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_OFF is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_ERR is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_WRN is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_INF is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_DBG is not set
CONFIG_CLOCK_CONTROL_LOG_LEVEL_DEFAULT=y
CONFIG_CLOCK_CONTROL_LOG_LEVEL=3
CONFIG_CLOCK_CONTROL_ESP32=y
CONFIG_CLOCK_CONTROL_ESP32_RTC_CLK_SRC_INT_RC=y
# CONFIG_CLOCK_CONTROL_ESP32_RTC_CLK_SRC_EXT_CRYS is not set
# CONFIG_CLOCK_CONTROL_ESP32_RTC_CLK_SRC_EXT_OSC is not set
# CONFIG_CLOCK_CONTROL_ESP32_RTC_CLK_SRC_INT_8MD256 is not set
CONFIG_CLOCK_CONTROL_ESP32_RTC_CLK_CAL_CYCLES=1024
# CONFIG_CLOCK_CONTROL_FIXED_RATE_CLOCK is not set
CONFIG_CLOCK_CONTROL_TISCI_PRIORITY=40
# CONFIG_COMPARATOR is not set
CONFIG_CONSOLE_INPUT_MAX_LINE_LEN=128
CONFIG_CONSOLE_HAS_DRIVER=y
# CONFIG_CONSOLE_HANDLER is not set
CONFIG_CONSOLE_INIT_PRIORITY=60
CONFIG_UART_CONSOLE=y
# CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS is not set
# CONFIG_UART_CONSOLE_MCUMGR is not set
# CONFIG_RAM_CONSOLE is not set
# CONFIG_IPM_CONSOLE_SENDER is not set
# CONFIG_IPM_CONSOLE_RECEIVER is not set
# CONFIG_UART_MCUMGR is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_OFF is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_ERR is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_WRN is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_INF is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_DBG is not set
CONFIG_UART_CONSOLE_LOG_LEVEL_DEFAULT=y
CONFIG_UART_CONSOLE_LOG_LEVEL=3
# CONFIG_EFI_CONSOLE is not set
# CONFIG_COREDUMP_DEVICE is not set
# CONFIG_CRC_DRIVER is not set
# CONFIG_CRYPTO is not set
# CONFIG_DAC is not set
# CONFIG_DAI is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DISK_DRIVERS is not set
# CONFIG_DISPLAY is not set
# CONFIG_DMA is not set
# CONFIG_DP_DRIVER is not set
# CONFIG_EDAC is not set
# CONFIG_EEPROM is not set
# CONFIG_ENTROPY_GENERATOR is not set
# CONFIG_ESPI is not set
# CONFIG_MDIO is not set
#
# Firmware drivers
#
# end of Firmware drivers
# CONFIG_FPGA is not set
# CONFIG_FUEL_GAUGE is not set
# CONFIG_GNSS is not set
# CONFIG_GPIO_LOG_LEVEL_OFF is not set
# CONFIG_GPIO_LOG_LEVEL_ERR is not set
# CONFIG_GPIO_LOG_LEVEL_WRN is not set
# CONFIG_GPIO_LOG_LEVEL_INF is not set
# CONFIG_GPIO_LOG_LEVEL_DBG is not set
CONFIG_GPIO_LOG_LEVEL_DEFAULT=y
CONFIG_GPIO_LOG_LEVEL=3
# CONFIG_GPIO_GET_DIRECTION is not set
# CONFIG_GPIO_GET_CONFIG is not set
# CONFIG_GPIO_ENABLE_DISABLE_INTERRUPT is not set
CONFIG_GPIO_ESP32=y
# CONFIG_HAPTICS is not set
# CONFIG_HWSPINLOCK is not set
# CONFIG_I2C is not set
# CONFIG_I2S is not set
# CONFIG_I3C is not set
#
# Interrupt controller drivers
#
CONFIG_INTC_INIT_PRIORITY=40
# CONFIG_INTC_LOG_LEVEL_OFF is not set
# CONFIG_INTC_LOG_LEVEL_ERR is not set
# CONFIG_INTC_LOG_LEVEL_WRN is not set
# CONFIG_INTC_LOG_LEVEL_INF is not set
# CONFIG_INTC_LOG_LEVEL_DBG is not set
CONFIG_INTC_LOG_LEVEL_DEFAULT=y
CONFIG_INTC_LOG_LEVEL=3
CONFIG_INTC_ESP32=y
# CONFIG_INTC_ESP32_DECISIONS_LOG is not set
# end of Interrupt controller drivers
# CONFIG_IPM is not set
# CONFIG_LED is not set
# CONFIG_LED_STRIP is not set
CONFIG_LORA=y
CONFIG_LORA_MODULE_BACKEND_LORAMAC_NODE=y
# CONFIG_LORA_MODULE_BACKEND_LORA_BASICS_MODEM is not set
# CONFIG_LORA_MODULE_BACKEND_NATIVE is not set
# CONFIG_LORA_LOG_LEVEL_OFF is not set
# CONFIG_LORA_LOG_LEVEL_ERR is not set
# CONFIG_LORA_LOG_LEVEL_WRN is not set
# CONFIG_LORA_LOG_LEVEL_INF is not set
# CONFIG_LORA_LOG_LEVEL_DBG is not set
CONFIG_LORA_LOG_LEVEL_DEFAULT=y
CONFIG_LORA_LOG_LEVEL=3
CONFIG_LORA_INIT_PRIORITY=90
CONFIG_LORA_SX126X=y
# CONFIG_MBOX is not set
# CONFIG_MIPI_DBI is not set
#
# Miscellaneous drivers
#
#
# Interconn Drivers
#
# end of Interconn Drivers
# CONFIG_TIMEAWARE_GPIO is not set
# end of Miscellaneous drivers
# CONFIG_MM_DRV is not set
# CONFIG_MSPI is not set
# CONFIG_OPAMP is not set
# CONFIG_PCIE is not set
# CONFIG_PCIE_ENDPOINT is not set
# CONFIG_PECI is not set
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_LOG_LEVEL_OFF is not set
# CONFIG_PINCTRL_LOG_LEVEL_ERR is not set
# CONFIG_PINCTRL_LOG_LEVEL_WRN is not set
# CONFIG_PINCTRL_LOG_LEVEL_INF is not set
# CONFIG_PINCTRL_LOG_LEVEL_DBG is not set
CONFIG_PINCTRL_LOG_LEVEL_DEFAULT=y
CONFIG_PINCTRL_LOG_LEVEL=3
# CONFIG_PINCTRL_DYNAMIC is not set
# CONFIG_PINCTRL_KEEP_SLEEP_STATE is not set
CONFIG_PINCTRL_ESP32=y
# CONFIG_PINCTRL_MCHP_COMMON is not set
# CONFIG_PINCTRL_NPCX_EX is not set
# CONFIG_PS2 is not set
# CONFIG_PSI5 is not set
# CONFIG_PTP_CLOCK is not set
# CONFIG_PWM is not set
# CONFIG_RETAINED_MEM is not set
# CONFIG_RTC is not set
# CONFIG_SDHC is not set
# CONFIG_SENSOR is not set
# CONFIG_SENT is not set
#
# Capabilities
#
CONFIG_SERIAL_HAS_DRIVER=y
CONFIG_SERIAL_SUPPORT_ASYNC=y
CONFIG_SERIAL_SUPPORT_INTERRUPT=y
CONFIG_SERIAL_INIT_PRIORITY=50
# CONFIG_UART_LOG_LEVEL_OFF is not set
# CONFIG_UART_LOG_LEVEL_ERR is not set
# CONFIG_UART_LOG_LEVEL_WRN is not set
# CONFIG_UART_LOG_LEVEL_INF is not set
# CONFIG_UART_LOG_LEVEL_DBG is not set
CONFIG_UART_LOG_LEVEL_DEFAULT=y
CONFIG_UART_LOG_LEVEL=3
# CONFIG_UART_ASYNC_API is not set
# CONFIG_UART_LINE_CTRL is not set
# CONFIG_UART_DRV_CMD is not set
# CONFIG_UART_WIDE_DATA is not set
# CONFIG_UART_PIPE is not set
# CONFIG_UART_ASYNC_RX_HELPER is not set
#
# Serial Drivers
#
CONFIG_UART_ESP32=y
CONFIG_SERIAL_ESP32_USB=y
CONFIG_UART_ESP32_TX_FIFO_THRESH=0x1
CONFIG_UART_ESP32_RX_FIFO_THRESH=0x16
# CONFIG_UART_NPCX_FIFO_EX is not set
# CONFIG_SMBUS is not set
# CONFIG_SPI_ASYNC is not set
# CONFIG_SPI_RTIO is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPI_EXTENDED_MODES is not set
CONFIG_SPI_INIT_PRIORITY=50
CONFIG_SPI_COMPLETION_TIMEOUT_TOLERANCE=200
# CONFIG_SPI_LOG_LEVEL_OFF is not set
# CONFIG_SPI_LOG_LEVEL_ERR is not set
# CONFIG_SPI_LOG_LEVEL_WRN is not set
# CONFIG_SPI_LOG_LEVEL_INF is not set
# CONFIG_SPI_LOG_LEVEL_DBG is not set
CONFIG_SPI_LOG_LEVEL_DEFAULT=y
CONFIG_SPI_LOG_LEVEL=3
CONFIG_ESP32_SPIM=y
# CONFIG_SPI_ESP32_INTERRUPT is not set
# CONFIG_STEPPER is not set
#
# Timer drivers
#
# CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME is not set
# CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE is not set
CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0
CONFIG_TICKLESS_CAPABLE=y
CONFIG_XTENSA_TIMER_LPM_TIMER_NONE=y
# end of Timer drivers
# CONFIG_UAOL is not set
# CONFIG_USB_BC12 is not set
# CONFIG_UDC_DRIVER is not set
# CONFIG_UHC_DRIVER is not set
# CONFIG_UVB is not set
# CONFIG_USB_DEVICE_DRIVER is not set
#
# USB common
#
# end of USB common
# CONFIG_USBC_TCPC_DRIVER is not set
# CONFIG_USBC_VBUS_DRIVER is not set
# CONFIG_USBC_PPC_DRIVER is not set
# CONFIG_VIDEO is not set
# CONFIG_VIRTIO is not set
# CONFIG_VIRTUALIZATION is not set
# CONFIG_W1 is not set
# CONFIG_WUC is not set
# CONFIG_TEE is not set
# end of Device Drivers
# CONFIG_REQUIRES_FULL_LIBC is not set
# CONFIG_REQUIRES_FLOAT_PRINTF is not set
# CONFIG_LIBC_ALLOW_LESS_THAN_64BIT_TIME is not set
CONFIG_FULL_LIBC_SUPPORTED=y
CONFIG_MINIMAL_LIBC_SUPPORTED=y
CONFIG_PICOLIBC_SUPPORTED=y
#
# C Library
#
# CONFIG_MINIMAL_LIBC is not set
CONFIG_PICOLIBC=y
# CONFIG_EXTERNAL_LIBC is not set
CONFIG_COMMON_LIBC_ABORT=y
# CONFIG_COMMON_LIBC_ASCTIME_R is not set
# CONFIG_COMMON_LIBC_CTIME_R is not set
CONFIG_COMMON_LIBC_TIME=y
CONFIG_COMMON_LIBC_MALLOC=y
CONFIG_COMMON_LIBC_CALLOC=y
CONFIG_COMMON_LIBC_REALLOCARRAY=y
# CONFIG_COMMON_LIBC_REMOVE is not set
# CONFIG_PICOLIBC_USE_MODULE is not set
CONFIG_PICOLIBC_USE_TOOLCHAIN=y
# CONFIG_PICOLIBC_IO_FLOAT is not set
CONFIG_PICOLIBC_IO_LONG_LONG=y
CONFIG_STDOUT_CONSOLE=y
CONFIG_NEED_LIBC_MEM_PARTITION=y
# end of C Library
#
# C++ Language Support
#
# CONFIG_CPP is not set
# end of C++ Language Support
#
# Additional libraries
#
#
# Hash Function Support
#
# CONFIG_SYS_HASH_FUNC32 is not set
# end of Hash Function Support
#
# Hashmap (Hash Table) Support
#
# CONFIG_SYS_HASH_MAP is not set
# end of Hashmap (Hash Table) Support
#
# Heap and Memory Allocation
#
# CONFIG_SYS_HEAP_VALIDATE is not set
# CONFIG_SYS_HEAP_STRESS is not set
# CONFIG_SYS_HEAP_INFO is not set
CONFIG_SYS_HEAP_ALLOC_LOOPS=3
# CONFIG_SYS_HEAP_RUNTIME_STATS is not set
CONFIG_SYS_HEAP_ARRAY_SIZE=0
# CONFIG_SYS_HEAP_LISTENER is not set
# CONFIG_SYS_HEAP_HARDENING_NONE is not set
CONFIG_SYS_HEAP_HARDENING_BASIC=y
# CONFIG_SYS_HEAP_HARDENING_MODERATE is not set
# CONFIG_SYS_HEAP_HARDENING_FULL is not set
# CONFIG_SYS_HEAP_HARDENING_EXTREME is not set
CONFIG_SYS_HEAP_HARDENING_LEVEL=1
# CONFIG_SYS_HEAP_LOG_LEVEL_OFF is not set
# CONFIG_SYS_HEAP_LOG_LEVEL_ERR is not set
# CONFIG_SYS_HEAP_LOG_LEVEL_WRN is not set
# CONFIG_SYS_HEAP_LOG_LEVEL_INF is not set
# CONFIG_SYS_HEAP_LOG_LEVEL_DBG is not set
CONFIG_SYS_HEAP_LOG_LEVEL_DEFAULT=y
CONFIG_SYS_HEAP_LOG_LEVEL=3
# CONFIG_SYS_HEAP_SMALL_ONLY is not set
# CONFIG_SYS_HEAP_BIG_ONLY is not set
CONFIG_SYS_HEAP_AUTO=y
# CONFIG_MULTI_HEAP is not set
# CONFIG_SHARED_MULTI_HEAP is not set
# end of Heap and Memory Allocation
#
# Memory Blocks
#
# CONFIG_SYS_MEM_BLOCKS is not set
# end of Memory Blocks
#
# MIDI2
#
# CONFIG_MIDI2_UMP_STREAM_RESPONDER is not set
# end of MIDI2
# CONFIG_NET_BUF is not set
#
# OS Support Library
#
# CONFIG_ZVFS_OPEN_IGNORE_MIN is not set
# CONFIG_PRINTK_SYNC is not set
CONFIG_MPSC_PBUF=y
# CONFIG_SPSC_PBUF is not set
# CONFIG_MPSC_CLEAR_ALLOCATED is not set
CONFIG_HAS_POWEROFF=y
# CONFIG_POWEROFF is not set
CONFIG_CBPRINTF_COMPLETE=y
# CONFIG_CBPRINTF_NANO is not set
CONFIG_CBPRINTF_FULL_INTEGRAL=y
# CONFIG_CBPRINTF_REDUCED_INTEGRAL is not set
# CONFIG_CBPRINTF_FP_SUPPORT is not set
# CONFIG_CBPRINTF_FP_A_SUPPORT is not set
# CONFIG_CBPRINTF_LIBC_SUBSTS is not set
# CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_OFF is not set
# CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_ERR is not set
# CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_WRN is not set
# CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_INF is not set
# CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_DBG is not set
CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_DEFAULT=y
CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL=3
# CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE is not set
CONFIG_CBPRINTF_CONVERT_CHECK_PTR=y
# CONFIG_ZVFS is not set
# CONFIG_CPU_LOAD_METRIC is not set
# CONFIG_CPU_LOAD_LOG_LEVEL_OFF is not set
# CONFIG_CPU_LOAD_LOG_LEVEL_ERR is not set
# CONFIG_CPU_LOAD_LOG_LEVEL_WRN is not set
# CONFIG_CPU_LOAD_LOG_LEVEL_INF is not set
# CONFIG_CPU_LOAD_LOG_LEVEL_DBG is not set
CONFIG_CPU_LOAD_LOG_LEVEL_DEFAULT=y
CONFIG_CPU_LOAD_LOG_LEVEL=3
# end of OS Support Library
#
# POSIX API Support
#
# CONFIG_POSIX_SYSTEM_INTERFACES is not set
# CONFIG_POSIX_API is not set
# CONFIG_POSIX_AEP_CHOICE_NONE is not set
CONFIG_POSIX_AEP_CHOICE_ZEPHYR=y
# CONFIG_POSIX_AEP_CHOICE_BASE is not set
# CONFIG_POSIX_AEP_CHOICE_PSE51 is not set
# CONFIG_POSIX_AEP_CHOICE_PSE52 is not set
# CONFIG_POSIX_AEP_CHOICE_PSE53 is not set
CONFIG_TC_PROVIDES_POSIX_C_LANG_SUPPORT_R=y
#
# POSIX C Library Extensions
#
CONFIG_POSIX_C_LANG_SUPPORT_R=y
CONFIG_POSIX_C_LIB_EXT=y
# end of POSIX C Library Extensions
# end of POSIX API Support
# CONFIG_EVENTFD is not set
# CONFIG_SMF is not set
CONFIG_LIBGCC_RTLIB=y
#
# Utility Library
#
# CONFIG_JSON_LIBRARY is not set
CONFIG_RING_BUFFER=y
# CONFIG_RING_BUFFER_LARGE is not set
# CONFIG_NOTIFY is not set
# CONFIG_BASE64 is not set
# CONFIG_ONOFF is not set
# CONFIG_UTF8 is not set
# CONFIG_COBS is not set
CONFIG_GETOPT=y
# CONFIG_GETOPT_LONG is not set
CONFIG_TIMEUTIL_APPLY_SKEW=y
# end of Utility Library
#
# Universally Unique Identifier (UUID)
#
# CONFIG_UUID is not set
# end of Universally Unique Identifier (UUID)
# CONFIG_MIN_HEAP is not set
# end of Additional libraries
#
# Subsystems and OS Services
#
# CONFIG_BT is not set
#
# Controller Area Network (CAN) bus subsystem
#
# end of Controller Area Network (CAN) bus subsystem
# CONFIG_CONSOLE_SUBSYS is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CRC is not set
# CONFIG_DAP is not set
#
# System Monitoring Options
#
# CONFIG_THREAD_ANALYZER is not set
# end of System Monitoring Options
#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_UBSAN is not set
# CONFIG_STACK_USAGE is not set
# CONFIG_STACK_SENTINEL is not set
CONFIG_PRINTK=y
CONFIG_EARLY_CONSOLE=y
# CONFIG_FORCE_NO_ASSERT is not set
CONFIG_ASSERT_VERBOSE=y
# CONFIG_ASSERT_NO_FILE_INFO is not set
# CONFIG_ASSERT_NO_COND_INFO is not set
# CONFIG_ASSERT_NO_MSG_INFO is not set
# CONFIG_ASSERT_TEST is not set
# CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT is not set
# CONFIG_DEBUG_THREAD_INFO is not set
# CONFIG_DEBUG_COREDUMP is not set
# CONFIG_SYMTAB is not set
# end of Debugging Options
# CONFIG_MIPI_STP_DECODER is not set
# CONFIG_CS_TRACE_DEFMT is not set
CONFIG_CPU_LOAD_LOG_PERIODICALLY=0
# CONFIG_DISK_ACCESS is not set
# CONFIG_DSP is not set
# CONFIG_EMUL is not set
# CONFIG_CHARACTER_FRAMEBUFFER is not set
#
# File Systems
#
# CONFIG_FILE_SYSTEM_LIB_LINK is not set
# CONFIG_FILE_SYSTEM is not set
# end of File Systems
# CONFIG_GNSS_RTK is not set
# CONFIG_INSTRUMENTATION is not set
#
# Inter Processor Communication
#
# CONFIG_RPMSG_SERVICE is not set
# CONFIG_IPC_SERVICE is not set
# CONFIG_OPENAMP_RSC_TABLE is not set
# end of Inter Processor Communication
# CONFIG_JWT is not set
#
# Key-Value Storage Systems
#
# CONFIG_ZMS is not set
# end of Key-Value Storage Systems
# CONFIG_LLEXT is not set
# CONFIG_LLEXT_EDK is not set
#
# Logging
#
CONFIG_LOG_CORE_INIT_PRIORITY=0
CONFIG_LOG_MODE_DEFERRED=y
# CONFIG_LOG_MODE_IMMEDIATE is not set
# CONFIG_LOG_MODE_MINIMAL is not set
# CONFIG_LOG_FRONTEND is not set
# CONFIG_LOG_FRONTEND_OPT_API is not set
# CONFIG_LOG_CUSTOM_HEADER is not set
# CONFIG_LOG_MULTIDOMAIN is not set
CONFIG_LOG_FLUSH_SLEEP_US=10000
#
# Logging levels filtering
#
# CONFIG_LOG_RUNTIME_FILTERING is not set
CONFIG_LOG_DEFAULT_LEVEL=3
CONFIG_LOG_OVERRIDE_LEVEL=0
CONFIG_LOG_MAX_LEVEL=4
# end of Logging levels filtering
#
# Processing
#
CONFIG_LOG_PRINTK=y
CONFIG_LOG_MODE_OVERFLOW=y
# CONFIG_LOG_BLOCK_IN_THREAD is not set
CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD=10
CONFIG_LOG_PROCESS_THREAD=y
CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS=0
CONFIG_LOG_PROCESS_THREAD_SLEEP_MS=1000
# CONFIG_LOG_PROCESS_THREAD_CUSTOM_PRIORITY is not set
CONFIG_LOG_BUFFER_SIZE=1024
CONFIG_LOG_TRACE_SHORT_TIMESTAMP=y
# CONFIG_LOG_TIMESTAMP_64BIT is not set
# CONFIG_LOG_TIMESTAMP_USE_REALTIME is not set
# CONFIG_LOG_SPEED is not set
# end of Processing
#
# Output Formatting
#
#
# Prepend non-hexdump log message with function name
#
# CONFIG_LOG_FUNC_NAME_PREFIX_ERR is not set
# CONFIG_LOG_FUNC_NAME_PREFIX_WRN is not set
# CONFIG_LOG_FUNC_NAME_PREFIX_INF is not set
CONFIG_LOG_FUNC_NAME_PREFIX_DBG=y
# end of Prepend non-hexdump log message with function name
# CONFIG_LOG_MIPI_SYST_ENABLE is not set
# CONFIG_LOG_DOMAIN_NAME_PREFIX is not set
# CONFIG_LOG_THREAD_ID_PREFIX is not set
# CONFIG_LOG_CUSTOM_FORMAT_SUPPORT is not set
CONFIG_LOG_BACKEND_SHOW_TIMESTAMP=y
CONFIG_LOG_BACKEND_SHOW_LEVEL=y
CONFIG_LOG_BACKEND_SHOW_COLOR=y
# CONFIG_LOG_INFO_COLOR_GREEN is not set
# CONFIG_LOG_DBG_COLOR_BLUE is not set
CONFIG_LOG_TAG_MAX_LEN=0
CONFIG_LOG_BACKEND_SUPPORTS_FORMAT_TIMESTAMP=y
CONFIG_LOG_BACKEND_FORMAT_TIMESTAMP=y
CONFIG_LOG_OUTPUT_FORMAT_TIME_TIMESTAMP=y
# CONFIG_LOG_OUTPUT_FORMAT_DATE_TIMESTAMP is not set
# CONFIG_LOG_OUTPUT_FORMAT_ISO8601_TIMESTAMP is not set
# CONFIG_LOG_OUTPUT_FORMAT_LINUX_TIMESTAMP is not set
# CONFIG_LOG_OUTPUT_FORMAT_CUSTOM_TIMESTAMP is not set
# CONFIG_LOG_BACKEND_CRLF_NONE is not set
# CONFIG_LOG_BACKEND_CRLF_LFONLY is not set
# CONFIG_LOG_BACKEND_SKIP_SOURCE is not set
# end of Output Formatting
#
# Backends
#
CONFIG_LOG_BACKEND_UART=y
CONFIG_LOG_BACKEND_UART_BUFFER_SIZE=1
CONFIG_LOG_BACKEND_UART_AUTOSTART=y
CONFIG_LOG_BACKEND_UART_OUTPUT_TEXT=y
# CONFIG_LOG_BACKEND_UART_OUTPUT_DICTIONARY is not set
# CONFIG_LOG_BACKEND_UART_OUTPUT_CUSTOM is not set
CONFIG_LOG_BACKEND_UART_OUTPUT_DEFAULT=0
# CONFIG_LOG_BACKEND_IPC_SERVICE is not set
# end of Backends
#
# Misc
#
CONFIG_LOG_USE_VLA=y
CONFIG_LOG_SIMPLE_MSG_OPTIMIZE=y
# CONFIG_LOG_ALWAYS_RUNTIME is not set
# CONFIG_LOG_FMT_SECTION is not set
# CONFIG_LOG_FMT_STRING_VALIDATE is not set
# CONFIG_LOG_MEM_UTILIZATION is not set
CONFIG_LOG_FAILURE_REPORT_PERIOD=1000
# end of Misc
CONFIG_LOG_RATELIMIT=y
CONFIG_LOG_RATELIMIT_INTERVAL_MS=5000
CONFIG_LOG_OUTPUT=y
# end of Logging
# CONFIG_LORAWAN is not set
# CONFIG_MEM_ATTR is not set
#
# Device Management
#
#
# Host command handler subsystem
#
# CONFIG_EC_HOST_CMD is not set
# end of Host command handler subsystem
# CONFIG_OSDP is not set
# end of Device Management
# CONFIG_MODBUS is not set
# CONFIG_MODEM_MODULES is not set
#
# Networking
#
# CONFIG_NETWORKING is not set
# end of Networking
#
# Power Management
#
CONFIG_HAS_PM=y
# CONFIG_PM_POLICY_LATENCY_STANDALONE is not set
# end of Power Management
#
# Platform Management Communications Infrastructure (PMCI)
#
# CONFIG_MCTP is not set
# end of Platform Management Communications Infrastructure (PMCI)
#
# Portability
#
# end of Portability
# CONFIG_PROFILING is not set
#
# Random Number Generators
#
# CONFIG_TEST_RANDOM_GENERATOR is not set
CONFIG_TIMER_RANDOM_INITIAL_STATE=123456789
CONFIG_ENTROPY_NODE_ENABLED=y
# CONFIG_CSPRNG_NEEDED is not set
# end of Random Number Generators
# CONFIG_RTIO is not set
#
# SD
#
# CONFIG_MMC_STACK is not set
# CONFIG_SDMMC_STACK is not set
# CONFIG_SDIO_STACK is not set
# end of SD
# CONFIG_SECURE_STORAGE is not set
# CONFIG_SETTINGS is not set
# CONFIG_SHELL is not set
# CONFIG_STATS is not set
#
# Storage
#
# CONFIG_STREAM_FLASH is not set
# end of Storage
# CONFIG_TASK_WDT is not set
#
# Testing
#
# CONFIG_ZTEST is not set
# CONFIG_ZTEST_MOCKING is not set
# CONFIG_ZTRESS is not set
#
# benchmarking options
#
# CONFIG_ZTEST_BENCHMARK is not set
# end of benchmarking options
# CONFIG_TEST is not set
# CONFIG_TEST_USERSPACE is not set
# end of Testing
#
# Coverage
#
# CONFIG_FORCE_COVERAGE is not set
CONFIG_COVERAGE_DUMP_PATH_EXCLUDE=""
# end of Coverage
# CONFIG_TIMING_FUNCTIONS is not set
# CONFIG_TRACING is not set
# CONFIG_USB_DEVICE_STACK is not set
# CONFIG_USB_DEVICE_STACK_NEXT is not set
# CONFIG_USB_HOST_STACK is not set
# CONFIG_USBC_STACK is not set
# CONFIG_ZBUS is not set
# CONFIG_MODULES is not set
# end of Subsystems and OS Services
CONFIG_TOOLCHAIN_ZEPHYR_1_0=y
CONFIG_TOOLCHAIN_ZEPHYR_SUPPORTS_THREAD_LOCAL_STORAGE=y
CONFIG_TOOLCHAIN_ZEPHYR_SUPPORTS_GNU_EXTENSIONS=y
CONFIG_PICOLIBC_DEFAULT=y
#
# Build and Link Features
#
#
# Linker Options
#
# CONFIG_LINKER_ORPHAN_SECTION_PLACE is not set
CONFIG_LINKER_ORPHAN_SECTION_WARN=y
# CONFIG_LINKER_ORPHAN_SECTION_ERROR is not set
CONFIG_FLASH_LOAD_SIZE=0
CONFIG_ROM_END_OFFSET=0
CONFIG_LD_LINKER_SCRIPT_SUPPORTED=y
CONFIG_LD_LINKER_TEMPLATE=y
# CONFIG_HAVE_CUSTOM_LINKER_SCRIPT is not set
CONFIG_LINKER_SORT_BY_ALIGNMENT=y
#
# Linker Sections
#
# CONFIG_LINKER_USE_BOOT_SECTION is not set
# CONFIG_LINKER_USE_PINNED_SECTION is not set
CONFIG_LINKER_GENERIC_SECTIONS_PRESENT_AT_BOOT=y
# end of Linker Sections
CONFIG_LINKER_ITERABLE_SUBALIGN=4
# end of Linker Options
#
# Compiler Options
#
# CONFIG_STD_C90 is not set
# CONFIG_STD_C99 is not set
# CONFIG_STD_C11 is not set
CONFIG_STD_C17=y
# CONFIG_STD_C23 is not set
CONFIG_TOOLCHAIN_SUPPORTS_GNU_EXTENSIONS=y
# CONFIG_GNU_C_EXTENSIONS is not set
# CONFIG_CODING_GUIDELINE_CHECK is not set
# CONFIG_COMPILER_FREESTANDING is not set
CONFIG_SIZE_OPTIMIZATIONS=y
# CONFIG_SIZE_OPTIMIZATIONS_AGGRESSIVE is not set
# CONFIG_SPEED_OPTIMIZATIONS is not set
# CONFIG_DEBUG_OPTIMIZATIONS is not set
# CONFIG_NO_OPTIMIZATIONS is not set
# CONFIG_COMPILER_WARNINGS_AS_ERRORS is not set
# CONFIG_DEPRECATION_TEST is not set
# CONFIG_COMPILER_SAVE_TEMPS is not set
CONFIG_COMPILER_TRACK_MACRO_EXPANSION=y
CONFIG_COMPILER_COLOR_DIAGNOSTICS=y
# CONFIG_FORTIFY_SOURCE_NONE is not set
CONFIG_FORTIFY_SOURCE_COMPILE_TIME=y
# CONFIG_FORTIFY_SOURCE_RUN_TIME is not set
CONFIG_COMPILER_OPT=""
# CONFIG_MISRA_SANE is not set
CONFIG_TOOLCHAIN_SUPPORTS_VLA_IN_STATEMENTS=y
CONFIG_TOOLCHAIN_SUPPORTS_VARIABLE_CLEANUP_ATTRIBUTE=y
# CONFIG_SCOPE_CLEANUP_HELPERS is not set
#
# Code Generation
#
CONFIG_COMPILER_CODEGEN_VLIW_AUTO=y
# CONFIG_COMPILER_CODEGEN_VLIW_ENABLED is not set
# CONFIG_COMPILER_CODEGEN_VLIW_DISABLED is not set
# end of Code Generation
# end of Compiler Options
# CONFIG_ASSERT_ON_ERRORS is not set
# CONFIG_NO_RUNTIME_CHECKS is not set
CONFIG_RUNTIME_ERROR_CHECKS=y
#
# Build Options
#
CONFIG_KERNEL_BIN_NAME="zephyr"
CONFIG_OUTPUT_STAT=y
# CONFIG_OUTPUT_SYMBOLS is not set
CONFIG_OUTPUT_PRINT_MEMORY_USAGE=y
# CONFIG_CLEANUP_INTERMEDIATE_FILES is not set
CONFIG_BUILD_GAP_FILL_PATTERN=0xFF
# CONFIG_BUILD_NO_GAP_FILL is not set
# CONFIG_BUILD_OUTPUT_HEX_GAP_FILL is not set
# CONFIG_BUILD_OUTPUT_EXE is not set
# CONFIG_BUILD_OUTPUT_S19_GAP_FILL is not set
# CONFIG_BUILD_OUTPUT_VERILOG is not set
# CONFIG_BUILD_OUTPUT_UF2 is not set
# CONFIG_BUILD_OUTPUT_MOT is not set
# CONFIG_BUILD_OUTPUT_STRIPPED is not set
# CONFIG_BUILD_OUTPUT_COMPRESS_DEBUG_SECTIONS is not set
# CONFIG_BUILD_ALIGN_LMA is not set
# CONFIG_APPLICATION_DEFINED_SYSCALL is not set
# CONFIG_MAKEFILE_EXPORTS is not set
# CONFIG_BUILD_OUTPUT_META is not set
CONFIG_BUILD_OUTPUT_STRIP_PATHS=y
CONFIG_CHECK_INIT_PRIORITIES=y
# CONFIG_EMIT_ALL_SYSCALLS is not set
# end of Build Options
CONFIG_WARN_DEPRECATED=y
# CONFIG_WARN_EXPERIMENTAL is not set
CONFIG_ENFORCE_ZEPHYR_STDINT=y
# end of Build and Link Features
#
# Boot Options
#
# CONFIG_IS_BOOTLOADER is not set
# CONFIG_BOOTLOADER_BOSSA is not set
# end of Boot Options
#
# Compatibility
#
CONFIG_LEGACY_GENERATED_INCLUDE_PATH=y
# end of Compatibility
#
# KISS Interface
#
CONFIG_LORAMODEM_KISS_IFACE_UART=y
# end of KISS Interface
#
# LoRa Radio Parameters
#
CONFIG_LORAMODEM_LORA_FREQ_HZ=869618000
CONFIG_LORAMODEM_LORA_SF=8
CONFIG_LORAMODEM_LORA_BW=62
CONFIG_LORAMODEM_LORA_CR=5
CONFIG_LORAMODEM_LORA_TX_POWER_DBM=21
CONFIG_LORAMODEM_LORA_PREAMBLE_LEN=8
# end of LoRa Radio Parameters
CONFIG_LORAMODEM_MAX_PACKET_SIZE=255
Reference in New Issue View Git Blame Copy Permalink