Add Elite-C to converters (#18309)
This commit is contained in:
Joel Challis
GitHub
parent
a3a47a6556
commit
1155140631
@ -38,7 +38,7 @@
|
||||
},
|
||||
"pin_compatible": {
|
||||
"type": "string",
|
||||
"enum": ["promicro"]
|
||||
"enum": ["promicro", "elite_c"]
|
||||
},
|
||||
"processor": {
|
||||
"type": "string",
|
||||
|
||||
@ -18,6 +18,8 @@ Currently the following converters are available:
|
||||
| `promicro` | `stemcell` |
|
||||
| `promicro` | `bonsai_c4` |
|
||||
| `promicro` | `elite_pi` |
|
||||
| `elite_c` | `stemcell` |
|
||||
| `elite_c` | `elite_pi` |
|
||||
|
||||
See below for more in depth information on each converter.
|
||||
|
||||
@ -48,6 +50,23 @@ Once a converter is enabled, it exposes the `CONVERT_TO_<target_uppercase>` flag
|
||||
#endif
|
||||
```
|
||||
|
||||
### Pin Compatibility
|
||||
|
||||
To ensure compatibility, provide validation, and power future workflows, a keyboard should declare its `pin compatibility`. For legacy reasons, this is currently assumed to be `promicro`.
|
||||
|
||||
Currently the following pin compatibility interfaces are defined:
|
||||
|
||||
| Pinout | Notes |
|
||||
|------------|-----------------------------------|
|
||||
| `promicro` | Includes RX/TX LEDs |
|
||||
| `elite_c` | Includes bottom row pins, no LEDs |
|
||||
|
||||
To declare the base for conversions, add this line to your keyboard's `rules.mk`:
|
||||
|
||||
```makefile
|
||||
PIN_COMPATIBLE = elite_c
|
||||
```
|
||||
|
||||
## Pro Micro
|
||||
|
||||
If a board currently supported in QMK uses a [Pro Micro](https://www.sparkfun.com/products/12640) (or compatible board), the supported alternative controllers are:
|
||||
@ -107,7 +126,7 @@ The following defaults are based on what has been implemented for [RP2040](platf
|
||||
|
||||
### SparkFun Pro Micro - RP2040, Blok, Bit-C PRO, and Elite-Pi :id=promicro_rp2040
|
||||
|
||||
Currently identical to [Adafruit KB2040](#kb2040).
|
||||
Currently identical to [Adafruit KB2040](#kb2040).
|
||||
|
||||
### STeMCell :id=stemcell
|
||||
|
||||
@ -138,4 +157,28 @@ The Bonsai C4 only has one on-board LED (B2), and by default, both the Pro Micro
|
||||
#define B0 PAL_LINE(GPIOA, 9)
|
||||
```
|
||||
|
||||
No peripherals are enabled by default at this time, but example code to enable SPI, I2C, PWM, and Serial communications can be found [here](/keyboards/custommk/bonsai_c4_template)
|
||||
No peripherals are enabled by default at this time, but example code to enable SPI, I2C, PWM, and Serial communications can be found [here](/keyboards/custommk/bonsai_c4_template).
|
||||
|
||||
## Elite-C
|
||||
|
||||
If a board currently supported in QMK uses an [Elite-C](https://keeb.io/products/elite-c-low-profile-version-usb-c-pro-micro-replacement-atmega32u4), the supported alternative controllers are:
|
||||
|
||||
| Device | Target |
|
||||
|----------------------------------------------------------------------------------|-------------------|
|
||||
| [STeMCell](https://github.com/megamind4089/STeMCell) | `stemcell` |
|
||||
| [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040) | `elite_pi` |
|
||||
|
||||
Converter summary:
|
||||
|
||||
| Target | Argument | `rules.mk` | Condition |
|
||||
|-------------------|---------------------------------|------------------------------|-------------------------------------|
|
||||
| `stemcell` | `-e CONVERT_TO=stemcell` | `CONVERT_TO=stemcell` | `#ifdef CONVERT_TO_STEMCELL` |
|
||||
| `elite_pi` | `-e CONVERT_TO=elite_pi` | `CONVERT_TO=elite_pi` | `#ifdef CONVERT_TO_ELITE_PI` |
|
||||
|
||||
### STeMCell :id=stemcell_elite
|
||||
|
||||
Currently identical to [STeMCell](#stemcell) with support for the additional bottom row of pins.
|
||||
|
||||
### Elite-Pi :id=elite_pi
|
||||
|
||||
Currently identical to [Adafruit KB2040](#kb2040), with support for the additional bottom row of pins.
|
||||
|
||||
@ -4,6 +4,8 @@ MCU = atmega32u4
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
PIN_COMPATIBLE = elite_c
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
|
||||
39
platforms/chibios/converters/elite_c_to_elite_pi/_pin_defs.h
Normal file
39
platforms/chibios/converters/elite_c_to_elite_pi/_pin_defs.h
Normal file
@ -0,0 +1,39 @@
|
||||
// Copyright 2022 QMK
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
// Left side (front)
|
||||
#define D3 0U
|
||||
#define D2 1U
|
||||
// GND
|
||||
// GND
|
||||
#define D1 2U
|
||||
#define D0 3U
|
||||
#define D4 4U
|
||||
#define C6 5U
|
||||
#define D7 6U
|
||||
#define E6 7U
|
||||
#define B4 8U
|
||||
#define B5 9U
|
||||
|
||||
// Right side (front)
|
||||
// RAW
|
||||
// GND
|
||||
// RESET
|
||||
// VCC
|
||||
#define F4 29U
|
||||
#define F5 28U
|
||||
#define F6 27U
|
||||
#define F7 26U
|
||||
#define B1 22U
|
||||
#define B3 20U
|
||||
#define B2 23U
|
||||
#define B6 21U
|
||||
|
||||
// Bottom row
|
||||
#define B7 12U
|
||||
#define D5 13U
|
||||
#define C7 14U
|
||||
#define F1 15U
|
||||
#define F0 16U
|
||||
@ -0,0 +1,9 @@
|
||||
# Elite-Pi MCU settings for converting AVR projects
|
||||
MCU := RP2040
|
||||
BOARD := QMK_PM2040
|
||||
BOOTLOADER := rp2040
|
||||
|
||||
# These are defaults based on what has been implemented for RP2040 boards
|
||||
SERIAL_DRIVER ?= vendor
|
||||
WS2812_DRIVER ?= vendor
|
||||
BACKLIGHT_DRIVER ?= software
|
||||
54
platforms/chibios/converters/elite_c_to_stemcell/_pin_defs.h
Normal file
54
platforms/chibios/converters/elite_c_to_stemcell/_pin_defs.h
Normal file
@ -0,0 +1,54 @@
|
||||
// Copyright 2022 Mega Mind (@megamind4089)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
// Pindefs for v2.0.0
|
||||
// https://megamind4089.github.io/STeMCell/pinout/
|
||||
|
||||
// Left side (front)
|
||||
#ifdef STEMCELL_UART_SWAP
|
||||
# define D3 PAL_LINE(GPIOA, 3)
|
||||
# define D2 PAL_LINE(GPIOA, 2)
|
||||
#else
|
||||
# define D3 PAL_LINE(GPIOA, 2)
|
||||
# define D2 PAL_LINE(GPIOA, 3)
|
||||
#endif
|
||||
// GND
|
||||
// GND
|
||||
#ifdef STEMCELL_I2C_SWAP
|
||||
# define D1 PAL_LINE(GPIOB, 6)
|
||||
# define D0 PAL_LINE(GPIOB, 7)
|
||||
#else
|
||||
# define D1 PAL_LINE(GPIOB, 7)
|
||||
# define D0 PAL_LINE(GPIOB, 6)
|
||||
#endif
|
||||
|
||||
#define D4 PAL_LINE(GPIOA, 15)
|
||||
#define C6 PAL_LINE(GPIOB, 3)
|
||||
#define D7 PAL_LINE(GPIOB, 4)
|
||||
#define E6 PAL_LINE(GPIOB, 5)
|
||||
#define B4 PAL_LINE(GPIOB, 8)
|
||||
#define B5 PAL_LINE(GPIOB, 9)
|
||||
|
||||
// Right side (front)
|
||||
// RAW
|
||||
// GND
|
||||
// RESET
|
||||
// VCC
|
||||
#define F4 PAL_LINE(GPIOB, 10)
|
||||
#define F5 PAL_LINE(GPIOB, 2)
|
||||
#define F6 PAL_LINE(GPIOB, 1)
|
||||
#define F7 PAL_LINE(GPIOB, 0)
|
||||
|
||||
#define B1 PAL_LINE(GPIOA, 5)
|
||||
#define B3 PAL_LINE(GPIOA, 6)
|
||||
#define B2 PAL_LINE(GPIOA, 7)
|
||||
#define B6 PAL_LINE(GPIOA, 4)
|
||||
|
||||
// Bottom row
|
||||
#define B7 PAL_LINE(GPIOC, 13)
|
||||
#define D5 PAL_LINE(GPIOC, 14)
|
||||
#define C7 PAL_LINE(GPIOC, 15)
|
||||
#define F1 PAL_LINE(GPIOA, 0)
|
||||
#define F0 PAL_LINE(GPIOA, 1)
|
||||
@ -0,0 +1,18 @@
|
||||
# Copyright 2022 Mega Mind (@megamind4089)
|
||||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
MCU := STM32F411
|
||||
BOARD := STEMCELL
|
||||
BOOTLOADER := tinyuf2
|
||||
|
||||
SERIAL_DRIVER ?= usart
|
||||
WS2812_DRIVER ?= bitbang
|
||||
|
||||
ifeq ($(strip $(STMC_US)), yes)
|
||||
OPT_DEFS += -DSTEMCELL_UART_SWAP
|
||||
endif
|
||||
|
||||
ifeq ($(strip $(STMC_IS)), yes)
|
||||
OPT_DEFS += -DSTEMCELL_I2C_SWAP
|
||||
endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user