Add eeprom defaults for tinyuf2 bootloader (#18042)
This commit is contained in:
parent
1c47bd0ddf
commit
43fd647130
@ -199,6 +199,7 @@ endif
|
||||
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
|
||||
OPT_DEFS += -DBOOTLOADER_TINYUF2
|
||||
BOOTLOADER_TYPE = tinyuf2
|
||||
FIRMWARE_FORMAT = uf2
|
||||
endif
|
||||
ifeq ($(strip $(BOOTLOADER)), rp2040)
|
||||
OPT_DEFS += -DBOOTLOADER_RP2040
|
||||
|
@ -348,7 +348,8 @@ ifneq ($(findstring STM32F401, $(MCU)),)
|
||||
# or <keyboard_dir>/ld/
|
||||
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
|
||||
MCU_LDSCRIPT ?= STM32F401xC_tinyuf2
|
||||
FIRMWARE_FORMAT ?= uf2
|
||||
EEPROM_DRIVER ?= wear_leveling
|
||||
WEAR_LEVELING_DRIVER ?= legacy
|
||||
else
|
||||
MCU_LDSCRIPT ?= STM32F401xC
|
||||
endif
|
||||
@ -464,7 +465,8 @@ ifneq ($(findstring STM32F411, $(MCU)),)
|
||||
# or <keyboard_dir>/ld/
|
||||
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
|
||||
MCU_LDSCRIPT ?= STM32F411xE_tinyuf2
|
||||
FIRMWARE_FORMAT ?= uf2
|
||||
EEPROM_DRIVER ?= wear_leveling
|
||||
WEAR_LEVELING_DRIVER ?= legacy
|
||||
else
|
||||
MCU_LDSCRIPT ?= STM32F411xE
|
||||
endif
|
||||
|
@ -9,14 +9,6 @@
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 4
|
||||
|
||||
#ifdef UF2_BUILD
|
||||
#define EXTERNAL_EEPROM_BYTE_COUNT 2048
|
||||
#define EXTERNAL_EEPROM_PAGE_SIZE 128
|
||||
#define EXTERNAL_EEPROM_ADDRESS_SIZE 1
|
||||
#define EXTERNAL_EEPROM_WRITE_TIME 0
|
||||
#define FEE_PAGE_BASE_ADDRESS 0x08008000
|
||||
#endif
|
||||
|
||||
/* Define custom font */
|
||||
#define OLED_FONT_H "keyboards/mechwild/puckbuddy/glcdfont.c"
|
||||
|
||||
|
@ -1,88 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32F401xE memory setup.
|
||||
*/
|
||||
MEMORY
|
||||
{
|
||||
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
|
||||
flash1 (rx) : org = 0x08004000, len = 16k
|
||||
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
|
||||
flash3 (rx) : org = 0x0800C000, len = 16k
|
||||
flash4 (rx) : org = 0x08010000, len = 512k - 64k
|
||||
flash5 (rx) : org = 0x00000000, len = 0
|
||||
flash6 (rx) : org = 0x00000000, len = 0
|
||||
flash7 (rx) : org = 0x00000000, len = 0
|
||||
ram0 (wx) : org = 0x20000000, len = 96k
|
||||
ram1 (wx) : org = 0x00000000, len = 0
|
||||
ram2 (wx) : org = 0x00000000, len = 0
|
||||
ram3 (wx) : org = 0x00000000, len = 0
|
||||
ram4 (wx) : org = 0x00000000, len = 0
|
||||
ram5 (wx) : org = 0x00000000, len = 0
|
||||
ram6 (wx) : org = 0x00000000, len = 0
|
||||
ram7 (wx) : org = 0x00000000, len = 0
|
||||
}
|
||||
|
||||
/* For each data/text section two region are defined, a virtual region
|
||||
and a load region (_LMA suffix).*/
|
||||
|
||||
/* Flash region to be used for exception vectors.*/
|
||||
REGION_ALIAS("VECTORS_FLASH", flash4);
|
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for constructors and destructors.*/
|
||||
REGION_ALIAS("XTORS_FLASH", flash4);
|
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for code text.*/
|
||||
REGION_ALIAS("TEXT_FLASH", flash4);
|
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for read only data.*/
|
||||
REGION_ALIAS("RODATA_FLASH", flash4);
|
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for various.*/
|
||||
REGION_ALIAS("VARIOUS_FLASH", flash4);
|
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/
|
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing
|
||||
of all exceptions and interrupts.*/
|
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by
|
||||
the main() function.*/
|
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for data segment.*/
|
||||
REGION_ALIAS("DATA_RAM", ram0);
|
||||
REGION_ALIAS("DATA_RAM_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for BSS segment.*/
|
||||
REGION_ALIAS("BSS_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the default heap.*/
|
||||
REGION_ALIAS("HEAP_RAM", ram0);
|
||||
|
||||
/* Generic rules inclusion.*/
|
||||
INCLUDE rules.ld
|
||||
|
||||
/* TinyUF2 bootloader reset support */
|
||||
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
|
@ -1,7 +0,0 @@
|
||||
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
|
||||
ifndef EEPROM_DRIVER
|
||||
MCU_LDSCRIPT = STM32F401xE
|
||||
EEPROM_DRIVER = vendor
|
||||
UF2_BUILD = yes
|
||||
endif
|
||||
endif
|
@ -51,6 +51,3 @@
|
||||
#define RGBLIGHT_EFFECT_TWINKLE
|
||||
|
||||
#endif
|
||||
|
||||
// you want to comment this if using stm32-dfu as bootloader
|
||||
#define FEE_PAGE_BASE_ADDRESS 0x08008000
|
||||
|
@ -1,88 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32F401xE memory setup.
|
||||
*/
|
||||
MEMORY
|
||||
{
|
||||
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
|
||||
flash1 (rx) : org = 0x08004000, len = 16k
|
||||
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
|
||||
flash3 (rx) : org = 0x0800C000, len = 16k
|
||||
flash4 (rx) : org = 0x08010000, len = 512k - 64k
|
||||
flash5 (rx) : org = 0x00000000, len = 0
|
||||
flash6 (rx) : org = 0x00000000, len = 0
|
||||
flash7 (rx) : org = 0x00000000, len = 0
|
||||
ram0 (wx) : org = 0x20000000, len = 96k
|
||||
ram1 (wx) : org = 0x00000000, len = 0
|
||||
ram2 (wx) : org = 0x00000000, len = 0
|
||||
ram3 (wx) : org = 0x00000000, len = 0
|
||||
ram4 (wx) : org = 0x00000000, len = 0
|
||||
ram5 (wx) : org = 0x00000000, len = 0
|
||||
ram6 (wx) : org = 0x00000000, len = 0
|
||||
ram7 (wx) : org = 0x00000000, len = 0
|
||||
}
|
||||
|
||||
/* For each data/text section two region are defined, a virtual region
|
||||
and a load region (_LMA suffix).*/
|
||||
|
||||
/* Flash region to be used for exception vectors.*/
|
||||
REGION_ALIAS("VECTORS_FLASH", flash4);
|
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for constructors and destructors.*/
|
||||
REGION_ALIAS("XTORS_FLASH", flash4);
|
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for code text.*/
|
||||
REGION_ALIAS("TEXT_FLASH", flash4);
|
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for read only data.*/
|
||||
REGION_ALIAS("RODATA_FLASH", flash4);
|
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for various.*/
|
||||
REGION_ALIAS("VARIOUS_FLASH", flash4);
|
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/
|
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing
|
||||
of all exceptions and interrupts.*/
|
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by
|
||||
the main() function.*/
|
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for data segment.*/
|
||||
REGION_ALIAS("DATA_RAM", ram0);
|
||||
REGION_ALIAS("DATA_RAM_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for BSS segment.*/
|
||||
REGION_ALIAS("BSS_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the default heap.*/
|
||||
REGION_ALIAS("HEAP_RAM", ram0);
|
||||
|
||||
/* Generic rules inclusion.*/
|
||||
INCLUDE rules.ld
|
||||
|
||||
/* TinyUF2 bootloader reset support */
|
||||
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
|
@ -4,8 +4,6 @@ BOARD = BLACKPILL_STM32_F401
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = tinyuf2
|
||||
MCU_LDSCRIPT = STM32F401xE
|
||||
EEPROM_DRIVER = vendor
|
||||
#BOOTLOADER = stm32-dfu
|
||||
|
||||
# Build Options
|
||||
|
@ -51,6 +51,3 @@
|
||||
#define RGBLIGHT_EFFECT_ALTERNATING
|
||||
#define RGBLIGHT_EFFECT_TWINKLE
|
||||
#endif
|
||||
|
||||
// you want to comment this if using stm32-dfu as bootloader
|
||||
#define FEE_PAGE_BASE_ADDRESS 0x08008000
|
||||
|
@ -1,88 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32F401xE memory setup.
|
||||
*/
|
||||
MEMORY
|
||||
{
|
||||
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
|
||||
flash1 (rx) : org = 0x08004000, len = 16k
|
||||
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
|
||||
flash3 (rx) : org = 0x0800C000, len = 16k
|
||||
flash4 (rx) : org = 0x08010000, len = 512k - 64k
|
||||
flash5 (rx) : org = 0x00000000, len = 0
|
||||
flash6 (rx) : org = 0x00000000, len = 0
|
||||
flash7 (rx) : org = 0x00000000, len = 0
|
||||
ram0 (wx) : org = 0x20000000, len = 96k
|
||||
ram1 (wx) : org = 0x00000000, len = 0
|
||||
ram2 (wx) : org = 0x00000000, len = 0
|
||||
ram3 (wx) : org = 0x00000000, len = 0
|
||||
ram4 (wx) : org = 0x00000000, len = 0
|
||||
ram5 (wx) : org = 0x00000000, len = 0
|
||||
ram6 (wx) : org = 0x00000000, len = 0
|
||||
ram7 (wx) : org = 0x00000000, len = 0
|
||||
}
|
||||
|
||||
/* For each data/text section two region are defined, a virtual region
|
||||
and a load region (_LMA suffix).*/
|
||||
|
||||
/* Flash region to be used for exception vectors.*/
|
||||
REGION_ALIAS("VECTORS_FLASH", flash4);
|
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for constructors and destructors.*/
|
||||
REGION_ALIAS("XTORS_FLASH", flash4);
|
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for code text.*/
|
||||
REGION_ALIAS("TEXT_FLASH", flash4);
|
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for read only data.*/
|
||||
REGION_ALIAS("RODATA_FLASH", flash4);
|
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for various.*/
|
||||
REGION_ALIAS("VARIOUS_FLASH", flash4);
|
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/
|
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing
|
||||
of all exceptions and interrupts.*/
|
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by
|
||||
the main() function.*/
|
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for data segment.*/
|
||||
REGION_ALIAS("DATA_RAM", ram0);
|
||||
REGION_ALIAS("DATA_RAM_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for BSS segment.*/
|
||||
REGION_ALIAS("BSS_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the default heap.*/
|
||||
REGION_ALIAS("HEAP_RAM", ram0);
|
||||
|
||||
/* Generic rules inclusion.*/
|
||||
INCLUDE rules.ld
|
||||
|
||||
/* TinyUF2 bootloader reset support */
|
||||
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
|
@ -5,8 +5,6 @@ BOARD = BLACKPILL_STM32_F401
|
||||
# Bootloader selection
|
||||
BOOTLOADER = tinyuf2
|
||||
#BOOTLOADER = stm32-dfu
|
||||
MCU_LDSCRIPT = STM32F401xE
|
||||
EEPROM_DRIVER = vendor
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
|
@ -78,6 +78,3 @@
|
||||
#define BOOTMAGIC_LITE_ROW_RIGHT 5
|
||||
#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
|
||||
#endif
|
||||
|
||||
// you want to comment this if using stm32-dfu as bootloader
|
||||
#define FEE_PAGE_BASE_ADDRESS 0x08008000
|
||||
|
@ -1,88 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32F401xE memory setup.
|
||||
*/
|
||||
MEMORY
|
||||
{
|
||||
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
|
||||
flash1 (rx) : org = 0x08004000, len = 16k
|
||||
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
|
||||
flash3 (rx) : org = 0x0800C000, len = 16k
|
||||
flash4 (rx) : org = 0x08010000, len = 512k - 64k
|
||||
flash5 (rx) : org = 0x00000000, len = 0
|
||||
flash6 (rx) : org = 0x00000000, len = 0
|
||||
flash7 (rx) : org = 0x00000000, len = 0
|
||||
ram0 (wx) : org = 0x20000000, len = 96k
|
||||
ram1 (wx) : org = 0x00000000, len = 0
|
||||
ram2 (wx) : org = 0x00000000, len = 0
|
||||
ram3 (wx) : org = 0x00000000, len = 0
|
||||
ram4 (wx) : org = 0x00000000, len = 0
|
||||
ram5 (wx) : org = 0x00000000, len = 0
|
||||
ram6 (wx) : org = 0x00000000, len = 0
|
||||
ram7 (wx) : org = 0x00000000, len = 0
|
||||
}
|
||||
|
||||
/* For each data/text section two region are defined, a virtual region
|
||||
and a load region (_LMA suffix).*/
|
||||
|
||||
/* Flash region to be used for exception vectors.*/
|
||||
REGION_ALIAS("VECTORS_FLASH", flash4);
|
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for constructors and destructors.*/
|
||||
REGION_ALIAS("XTORS_FLASH", flash4);
|
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for code text.*/
|
||||
REGION_ALIAS("TEXT_FLASH", flash4);
|
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for read only data.*/
|
||||
REGION_ALIAS("RODATA_FLASH", flash4);
|
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for various.*/
|
||||
REGION_ALIAS("VARIOUS_FLASH", flash4);
|
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/
|
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing
|
||||
of all exceptions and interrupts.*/
|
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by
|
||||
the main() function.*/
|
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for data segment.*/
|
||||
REGION_ALIAS("DATA_RAM", ram0);
|
||||
REGION_ALIAS("DATA_RAM_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for BSS segment.*/
|
||||
REGION_ALIAS("BSS_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the default heap.*/
|
||||
REGION_ALIAS("HEAP_RAM", ram0);
|
||||
|
||||
/* Generic rules inclusion.*/
|
||||
INCLUDE rules.ld
|
||||
|
||||
/* TinyUF2 bootloader reset support */
|
||||
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
|
@ -5,8 +5,6 @@ BOARD = BLACKPILL_STM32_F401
|
||||
# Bootloader selection
|
||||
BOOTLOADER = tinyuf2
|
||||
#BOOTLOADER = stm32-dfu
|
||||
MCU_LDSCRIPT = STM32F401xE
|
||||
EEPROM_DRIVER = vendor
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
|
@ -55,6 +55,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#endif
|
||||
|
||||
// you want to comment this if using stm32-dfu as bootloader
|
||||
#define FEE_PAGE_BASE_ADDRESS 0x08008000
|
||||
|
@ -1,88 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32F401xE memory setup.
|
||||
*/
|
||||
MEMORY
|
||||
{
|
||||
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
|
||||
flash1 (rx) : org = 0x08004000, len = 16k
|
||||
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
|
||||
flash3 (rx) : org = 0x0800C000, len = 16k
|
||||
flash4 (rx) : org = 0x08010000, len = 512k - 64k
|
||||
flash5 (rx) : org = 0x00000000, len = 0
|
||||
flash6 (rx) : org = 0x00000000, len = 0
|
||||
flash7 (rx) : org = 0x00000000, len = 0
|
||||
ram0 (wx) : org = 0x20000000, len = 96k
|
||||
ram1 (wx) : org = 0x00000000, len = 0
|
||||
ram2 (wx) : org = 0x00000000, len = 0
|
||||
ram3 (wx) : org = 0x00000000, len = 0
|
||||
ram4 (wx) : org = 0x00000000, len = 0
|
||||
ram5 (wx) : org = 0x00000000, len = 0
|
||||
ram6 (wx) : org = 0x00000000, len = 0
|
||||
ram7 (wx) : org = 0x00000000, len = 0
|
||||
}
|
||||
|
||||
/* For each data/text section two region are defined, a virtual region
|
||||
and a load region (_LMA suffix).*/
|
||||
|
||||
/* Flash region to be used for exception vectors.*/
|
||||
REGION_ALIAS("VECTORS_FLASH", flash4);
|
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for constructors and destructors.*/
|
||||
REGION_ALIAS("XTORS_FLASH", flash4);
|
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for code text.*/
|
||||
REGION_ALIAS("TEXT_FLASH", flash4);
|
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for read only data.*/
|
||||
REGION_ALIAS("RODATA_FLASH", flash4);
|
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for various.*/
|
||||
REGION_ALIAS("VARIOUS_FLASH", flash4);
|
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/
|
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing
|
||||
of all exceptions and interrupts.*/
|
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by
|
||||
the main() function.*/
|
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for data segment.*/
|
||||
REGION_ALIAS("DATA_RAM", ram0);
|
||||
REGION_ALIAS("DATA_RAM_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for BSS segment.*/
|
||||
REGION_ALIAS("BSS_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the default heap.*/
|
||||
REGION_ALIAS("HEAP_RAM", ram0);
|
||||
|
||||
/* Generic rules inclusion.*/
|
||||
INCLUDE rules.ld
|
||||
|
||||
/* TinyUF2 bootloader reset support */
|
||||
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
|
@ -5,8 +5,6 @@ BOARD = BLACKPILL_STM32_F401
|
||||
# Bootloader selection
|
||||
BOOTLOADER = tinyuf2
|
||||
#BOOTLOADER = stm32-dfu
|
||||
MCU_LDSCRIPT = STM32F401xE
|
||||
EEPROM_DRIVER = vendor
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
|
@ -64,6 +64,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define OLED_BRIGHTNESS 128
|
||||
#define OLED_FONT_H "keyboards/mlego/m65/lib/glcdfont.c"
|
||||
#endif
|
||||
|
||||
// you want to comment this if using stm32-dfu as bootloader
|
||||
#define FEE_PAGE_BASE_ADDRESS 0x08008000
|
||||
|
@ -1,88 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32F401xE memory setup.
|
||||
*/
|
||||
MEMORY
|
||||
{
|
||||
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
|
||||
flash1 (rx) : org = 0x08004000, len = 16k
|
||||
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
|
||||
flash3 (rx) : org = 0x0800C000, len = 16k
|
||||
flash4 (rx) : org = 0x08010000, len = 512k - 64k
|
||||
flash5 (rx) : org = 0x00000000, len = 0
|
||||
flash6 (rx) : org = 0x00000000, len = 0
|
||||
flash7 (rx) : org = 0x00000000, len = 0
|
||||
ram0 (wx) : org = 0x20000000, len = 96k
|
||||
ram1 (wx) : org = 0x00000000, len = 0
|
||||
ram2 (wx) : org = 0x00000000, len = 0
|
||||
ram3 (wx) : org = 0x00000000, len = 0
|
||||
ram4 (wx) : org = 0x00000000, len = 0
|
||||
ram5 (wx) : org = 0x00000000, len = 0
|
||||
ram6 (wx) : org = 0x00000000, len = 0
|
||||
ram7 (wx) : org = 0x00000000, len = 0
|
||||
}
|
||||
|
||||
/* For each data/text section two region are defined, a virtual region
|
||||
and a load region (_LMA suffix).*/
|
||||
|
||||
/* Flash region to be used for exception vectors.*/
|
||||
REGION_ALIAS("VECTORS_FLASH", flash4);
|
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for constructors and destructors.*/
|
||||
REGION_ALIAS("XTORS_FLASH", flash4);
|
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for code text.*/
|
||||
REGION_ALIAS("TEXT_FLASH", flash4);
|
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for read only data.*/
|
||||
REGION_ALIAS("RODATA_FLASH", flash4);
|
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for various.*/
|
||||
REGION_ALIAS("VARIOUS_FLASH", flash4);
|
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/
|
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing
|
||||
of all exceptions and interrupts.*/
|
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by
|
||||
the main() function.*/
|
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for data segment.*/
|
||||
REGION_ALIAS("DATA_RAM", ram0);
|
||||
REGION_ALIAS("DATA_RAM_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for BSS segment.*/
|
||||
REGION_ALIAS("BSS_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the default heap.*/
|
||||
REGION_ALIAS("HEAP_RAM", ram0);
|
||||
|
||||
/* Generic rules inclusion.*/
|
||||
INCLUDE rules.ld
|
||||
|
||||
/* TinyUF2 bootloader reset support */
|
||||
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
|
@ -5,8 +5,6 @@ BOARD = BLACKPILL_STM32_F401
|
||||
# Bootloader selection
|
||||
BOOTLOADER = tinyuf2
|
||||
#BOOTLOADER = stm32-dfu
|
||||
MCU_LDSCRIPT = STM32F401xE
|
||||
EEPROM_DRIVER = vendor
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
|
@ -8,10 +8,6 @@ BOOTLOADER := tinyuf2
|
||||
SERIAL_DRIVER ?= usart
|
||||
WS2812_DRIVER ?= bitbang
|
||||
|
||||
EEPROM_DRIVER = wear_leveling
|
||||
WEAR_LEVELING_DRIVER = legacy
|
||||
|
||||
|
||||
ifeq ($(strip $(STMC_US)), yes)
|
||||
OPT_DEFS += -DSTEMCELL_UART_SWAP
|
||||
endif
|
||||
|
Loading…
Reference in New Issue
Block a user