Move RGBLIGHT_SPLIT to data driven (#21190)

* Move `RGBLIGHT_SPLIT` to data driven * Remove where `split_count` is already set
2023-06-15 22:27:26 +10:00 · 2023-06-15 22:27:26 +10:00 · e8ca83a353
commit e8ca83a353
parent c011eb1ead
73 changed files with 25 additions and 67 deletions
--- a/keyboards/aleblazer/zodiark/config.h
+++ b/keyboards/aleblazer/zodiark/config.h
@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifdef RGBLIGHT_ENABLE
 #define RGBLED_NUM 68
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
--- a/keyboards/avalanche/v2/config.h
+++ b/keyboards/avalanche/v2/config.h
@ -4,4 +4,3 @@
 #pragma once

 #define RGBLED_NUM 12
-#define RGBLIGHT_SPLIT
--- a/keyboards/avalanche/v3/config.h
+++ b/keyboards/avalanche/v3/config.h
@ -4,4 +4,3 @@
 #pragma once

 #define RGBLED_NUM 12
-#define RGBLIGHT_SPLIT
--- a/keyboards/avalanche/v4/config.h
+++ b/keyboards/avalanche/v4/config.h
@ -5,7 +5,6 @@

 #ifdef RGBLIGHT_ENABLE
 #    define RGBLED_NUM 64
-#    define RGBLIGHT_SPLIT
 #    define RGBLIGHT_HUE_STEP  10    
 #    define RGBLIGHT_SAT_STEP  17    
 #    define RGBLIGHT_VAL_STEP  17    
--- a/keyboards/bastardkb/tbk/config.h
+++ b/keyboards/bastardkb/tbk/config.h
@ -18,7 +18,6 @@
 #pragma once

 #define RGBLED_NUM 38
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
--- a/keyboards/bluebell/swoop/config.h
+++ b/keyboards/bluebell/swoop/config.h
@ -29,7 +29,6 @@
  #define RGBLIGHT_EFFECT_STATIC_GRADIENT
  #define RGBLIGHT_EFFECT_BREATHING
  #define RGBLED_NUM 36
-  #define RGBLIGHT_SPLIT
  #define RGBLIGHT_HUE_STEP 10
  #define RGBLIGHT_SAT_STEP 17
  #define RGBLIGHT_VAL_STEP 17
--- a/keyboards/crkbd/rev1/config.h
+++ b/keyboards/crkbd/rev1/config.h
@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifdef RGBLIGHT_ENABLE
 #    define RGBLED_NUM 54 // Number of LEDs
-#    define RGBLIGHT_SPLIT
 #endif

 #ifdef RGB_MATRIX_ENABLE
--- a/keyboards/doppelganger/config.h
+++ b/keyboards/doppelganger/config.h
@ -22,7 +22,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define USE_I2C

 #define RGBLED_NUM 2
-#define RGBLIGHT_SPLIT

 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
--- a/keyboards/draculad/config.h
+++ b/keyboards/draculad/config.h
@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_STATIC_GRADIENT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLED_NUM 10
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
--- a/keyboards/draculad/info.json
+++ b/keyboards/draculad/info.json
@ -8,6 +8,9 @@
        "pid": "0x1B1E",
        "device_version": "0.0.1"
    },
+    "rgblight": {
+        "split": true
+    },
    "ws2812": {
        "pin": "D3"
    },
--- a/keyboards/flxlb/zplit/config.h
+++ b/keyboards/flxlb/zplit/config.h
@ -30,7 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 /* ws2812 RGB LED */
 #define RGBLED_NUM 16
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
--- a/keyboards/halfcliff/config.h
+++ b/keyboards/halfcliff/config.h
@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { B4, E6, C6, B6, B2 }

   #define RGBLED_NUM 10
-   #define RGBLIGHT_SPLIT
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8
--- a/keyboards/handwired/brain/config.h
+++ b/keyboards/handwired/brain/config.h
@ -44,8 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #define RGBLED_NUM 28  // Number of LEDs

-#define RGBLIGHT_SPLIT
-
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/handwired/brain/info.json
+++ b/keyboards/handwired/brain/info.json
@ -20,6 +20,7 @@
        "pin": "D3"
    },
    "rgblight": {
+        "split": true,
        "max_brightness": 120
    },
    "split": {
--- a/keyboards/handwired/freoduo/config.h
+++ b/keyboards/handwired/freoduo/config.h
@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #if !defined(RGBLED_NUM)
 #    define RGBLED_NUM 30
-#    define RGBLIGHT_SPLIT
 #    define RGBLIGHT_LAYERS
 #endif
 #define RGBLIGHT_EFFECT_BREATHING
--- a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h
@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 // WS2812 RGB LED strip input and number of LEDs
 #define RGBLED_NUM      20
-#define RGBLIGHT_SPLIT

 #define AUDIO_PIN       C6

--- a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h
@ -30,7 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define WS2812_DMA_CHANNEL  3  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.

 #define RGBLED_NUM          20
-#define RGBLIGHT_SPLIT

 #define DEBUG_LED_PIN C13

--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
@ -33,7 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.


 #define RGBLED_NUM          57
-#define RGBLIGHT_SPLIT

 #define DEBUG_LED_PIN      C13

--- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h
@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 // WS2812 RGB LED strip input and number of LEDs
 #define RGBLED_NUM      20
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_LIMIT_VAL 80

 #define DEBUG_LED_PIN   D6
--- a/keyboards/handwired/tsubasa/config.h
+++ b/keyboards/handwired/tsubasa/config.h
@ -19,7 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_RIGHT

 #    define RGBLED_NUM 12
-#    define RGBLIGHT_SPLIT
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 1
 #    define RGBLIGHT_VAL_STEP 1
--- a/keyboards/helix/rev3_4rows/config.h
+++ b/keyboards/helix/rev3_4rows/config.h
@ -64,7 +64,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif

 #ifdef RGBLIGHT_ENABLE
-  #define RGBLIGHT_SPLIT
 //   #define RGBLIGHT_HUE_STEP 8
 //   #define RGBLIGHT_SAT_STEP 8
 //   #define RGBLIGHT_VAL_STEP 8
--- a/keyboards/helix/rev3_5rows/config.h
+++ b/keyboards/helix/rev3_5rows/config.h
@ -64,7 +64,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif

 #ifdef RGBLIGHT_ENABLE
-  #define RGBLIGHT_SPLIT
 //   #define RGBLIGHT_HUE_STEP 8
 //   #define RGBLIGHT_SAT_STEP 8
 //   #define RGBLIGHT_VAL_STEP 8
--- a/keyboards/hidtech/bastyl/config.h
+++ b/keyboards/hidtech/bastyl/config.h
@ -19,7 +19,6 @@
 #pragma once

 #define RGBLED_NUM 38
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
--- a/keyboards/hidtech/bastyl/info.json
+++ b/keyboards/hidtech/bastyl/info.json
@ -19,6 +19,9 @@
    "ws2812": {
        "pin": "D2"
    },
+    "rgblight": {
+        "split": true
+    },
    "processor": "atmega32u4",
    "bootloader": "atmel-dfu",
    "layouts": {
--- a/keyboards/jian/nsrev2/config.h
+++ b/keyboards/jian/nsrev2/config.h
@ -34,7 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE

 #define RGBLIGHT_SLEEP
-#define RGBLIGHT_SPLIT

 #ifndef IOS_DEVICE_ENABLE
 #if RGBLED_NUM <= 6
--- a/keyboards/jian/nsrev2/info.json
+++ b/keyboards/jian/nsrev2/info.json
@ -13,6 +13,9 @@
        "levels": 5,
        "breathing": true
    },
+    "rgblight": {
+        "split": true
+    },
    "ws2812": {
        "pin": "D4"
    },
--- a/keyboards/jian/rev1/config.h
+++ b/keyboards/jian/rev1/config.h
@ -87,7 +87,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.


 #define RGBLIGHT_SLEEP
-#define RGBLIGHT_SPLIT

 #ifndef IOS_DEVICE_ENABLE
 #if RGBLED_NUM <= 6
--- a/keyboards/jian/rev1/info.json
+++ b/keyboards/jian/rev1/info.json
@ -12,6 +12,9 @@
        "pin": "B6",
        "levels": 5
    },
+    "rgblight": {
+        "split": true
+    },
    "ws2812": {
        "pin": "D4"
    },
--- a/keyboards/jian/rev2/config.h
+++ b/keyboards/jian/rev2/config.h
@ -38,7 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE

 #define RGBLIGHT_SLEEP
-#define RGBLIGHT_SPLIT

 #ifndef IOS_DEVICE_ENABLE
 #if RGBLED_NUM <= 6
--- a/keyboards/jian/rev2/info.json
+++ b/keyboards/jian/rev2/info.json
@ -12,6 +12,9 @@
        "pin": "C6",
        "levels": 5
    },
+    "rgblight": {
+        "split": true
+    },
    "ws2812": {
        "pin": "D4"
    },
--- a/keyboards/jiran/rev2/config.h
+++ b/keyboards/jiran/rev2/config.h
@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 56
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17
--- a/keyboards/kagizaraya/scythe/config.h
+++ b/keyboards/kagizaraya/scythe/config.h
@ -16,7 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #pragma once

-#define RGBLIGHT_SPLIT 1
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
--- a/keyboards/kagizaraya/scythe/info.json
+++ b/keyboards/kagizaraya/scythe/info.json
@ -19,6 +19,9 @@
    "split": {
        "soft_serial_pin": "D0"
    },
+    "rgblight": {
+        "split": true
+    },
    "ws2812": {
        "pin": "F0"
    },
--- a/keyboards/kapl/rev1/config.h
+++ b/keyboards/kapl/rev1/config.h
@ -6,7 +6,6 @@
 #define MASTER_LEFT

 #define RGBLED_NUM 88
-#define RGBLIGHT_SPLIT

 #define RGB_MATRIX_LED_COUNT 88
 #define RGB_MATRIX_SPLIT { 44, 44 }
--- a/keyboards/keycapsss/kimiko/rev1/config.h
+++ b/keyboards/keycapsss/kimiko/rev1/config.h
@ -18,7 +18,6 @@

 #ifdef RGBLIGHT_ENABLE
 #   define RGBLED_NUM 60  // Total number of LEDs
-#   define RGBLIGHT_SPLIT
 #endif

 // Limit the power draw
--- a/keyboards/lily58/glow_enc/config.h
+++ b/keyboards/lily58/glow_enc/config.h
@ -21,5 +21,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once

 #define RGBLED_NUM 72    // Number of LEDs
-
-#define RGBLIGHT_SPLIT
--- a/keyboards/lily58/light/config.h
+++ b/keyboards/lily58/light/config.h
@ -21,4 +21,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once

 #define RGBLED_NUM 70
-#define RGBLIGHT_SPLIT
--- a/keyboards/manta60/config.h
+++ b/keyboards/manta60/config.h
@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SELECT_SOFT_SERIAL_SPEED 1

 #    define RGBLED_NUM 68
-#    define RGBLIGHT_SPLIT
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    ifndef IOS_DEVICE_ENABLE
--- a/keyboards/mechwild/mokulua/mirrored/config.h
+++ b/keyboards/mechwild/mokulua/mirrored/config.h
@ -9,7 +9,6 @@

 #define MASTER_LEFT
 //#define MASTER_RIGHT
-#define RGBLIGHT_SPLIT
 #define SPLIT_LAYER_STATE_ENABLE
 #define SPLIT_LED_STATE_ENABLE
 #define SPLIT_MODS_ENABLE
--- a/keyboards/mechwild/mokulua/standard/config.h
+++ b/keyboards/mechwild/mokulua/standard/config.h
@ -9,7 +9,6 @@

 #define MASTER_LEFT
 //#define MASTER_RIGHT
-#define RGBLIGHT_SPLIT
 #define SPLIT_LAYER_STATE_ENABLE
 #define SPLIT_LED_STATE_ENABLE
 #define SPLIT_MODS_ENABLE
--- a/keyboards/merge/um70/config.h
+++ b/keyboards/merge/um70/config.h
@ -20,7 +20,6 @@
 #define MASTER_LEFT
 #define SPLIT_MODS_ENABLE

-#define RGBLIGHT_SPLIT
 #define RGBLED_NUM 83
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
--- a/keyboards/merge/um80/config.h
+++ b/keyboards/merge/um80/config.h
@ -20,7 +20,6 @@
 #define MASTER_LEFT
 #define SPLIT_MODS_ENABLE

-#define RGBLIGHT_SPLIT
 #define RGBLED_NUM 100
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
--- a/keyboards/meson/config.h
+++ b/keyboards/meson/config.h
@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define USE_I2C

   #define RGBLED_NUM 10
-   #define RGBLIGHT_SPLIT
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8
--- a/keyboards/mint60/config.h
+++ b/keyboards/mint60/config.h
@ -23,7 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE

 #define RGBLED_NUM 8
-#define RGBLIGHT_SPLIT

 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
--- a/keyboards/mint60/info.json
+++ b/keyboards/mint60/info.json
@ -16,6 +16,9 @@
  "split": {
    "soft_serial_pin": "D2"
  },
+  "rgblight": {
+    "split": true
+  },
  "ws2812": {
    "pin": "D3"
  },
--- a/keyboards/mlego/m60_split/rev1/config.h
+++ b/keyboards/mlego/m60_split/rev1/config.h
@ -24,7 +24,6 @@
 #define SERIAL_USART_SPEED 921600

 #ifdef RGBLIGHT_ENABLE
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_LAYERS

 #define RGBLIGHT_DEFAULT_HUE 213
--- a/keyboards/mlego/m60_split/rev2/config.h
+++ b/keyboards/mlego/m60_split/rev2/config.h
@ -26,7 +26,6 @@


 #ifdef RGBLIGHT_ENABLE
-#define RGBLIGHT_SPLIT
 #define RGBLIGHT_LAYERS
 #define RGBLED_NUM 16
 #define RGBLIGHT_EFFECT_BREATHING
--- a/keyboards/omkbd/ergodash/mini/config.h
+++ b/keyboards/omkbd/ergodash/mini/config.h
@ -40,7 +40,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 20
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/omkbd/ergodash/rev1/config.h
+++ b/keyboards/omkbd/ergodash/rev1/config.h
@ -40,7 +40,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 24
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/omkbd/runner3680/3x6/config.h
+++ b/keyboards/omkbd/runner3680/3x6/config.h
@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 36
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/omkbd/runner3680/3x7/config.h
+++ b/keyboards/omkbd/runner3680/3x7/config.h
@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 42
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/omkbd/runner3680/3x8/config.h
+++ b/keyboards/omkbd/runner3680/3x8/config.h
@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 48
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/omkbd/runner3680/4x6/config.h
+++ b/keyboards/omkbd/runner3680/4x6/config.h
@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 48
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/omkbd/runner3680/4x7/config.h
+++ b/keyboards/omkbd/runner3680/4x7/config.h
@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 56
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/omkbd/runner3680/4x8/config.h
+++ b/keyboards/omkbd/runner3680/4x8/config.h
@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 64
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/omkbd/runner3680/5x6/config.h
+++ b/keyboards/omkbd/runner3680/5x6/config.h
@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 60
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/omkbd/runner3680/5x6_5x8/config.h
+++ b/keyboards/omkbd/runner3680/5x6_5x8/config.h
@ -37,7 +37,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 70
-#define RGBLIGHT_SPLIT
 #endif
 #ifdef RGB_MATRIX_ENABLE
 #define RGB_MATRIX_LED_COUNT 70
--- a/keyboards/omkbd/runner3680/5x7/config.h
+++ b/keyboards/omkbd/runner3680/5x7/config.h
@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 70
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/omkbd/runner3680/5x8/config.h
+++ b/keyboards/omkbd/runner3680/5x8/config.h
@ -36,7 +36,6 @@
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_NUM 80
-#define RGBLIGHT_SPLIT

 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
--- a/keyboards/rate/pistachio/rev1/config.h
+++ b/keyboards/rate/pistachio/rev1/config.h
@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define USE_I2C

 /* ws2812 RGB LED */
-#define RGBLIGHT_SPLIT
 #define RGBLED_NUM 2
 #define RGBLIGHT_LAYERS
 #define RGBLIGHT_HUE_STEP 10
--- a/keyboards/rate/pistachio/rev2/config.h
+++ b/keyboards/rate/pistachio/rev2/config.h
@ -23,7 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SPLIT_HAND_MATRIX_GRID D4,D3

 /* ws2812 RGB LED */
-#define RGBLIGHT_SPLIT
 #define RGBLED_NUM 84
 #define RGBLIGHT_LAYERS
 #define RGBLIGHT_HUE_STEP 10
--- a/keyboards/redox/rev1/config.h
+++ b/keyboards/redox/rev1/config.h
@ -24,8 +24,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #define RGBLED_NUM 14    // Number of LEDs

-#define RGBLIGHT_SPLIT   // sync LEDs between RIGHT and LEFT hand
-
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/redox/rev1/info.json
+++ b/keyboards/redox/rev1/info.json
@ -8,6 +8,9 @@
    "pid": "0x5244",
    "device_version": "1.0.0"
  },
+  "rgblight": {
+    "split": true
+  },
  "layouts": {
    "LAYOUT": {
      "layout": [
--- a/keyboards/rura66/rev1/config.h
+++ b/keyboards/rura66/rev1/config.h
@ -22,7 +22,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifdef RGBLIGHT_ENABLE
  #define RGBLED_NUM 66 // Number of LEDs
-  #define RGBLIGHT_SPLIT
  #define RGBLIGHT_HUE_STEP 8
  #define RGBLIGHT_SAT_STEP 8
  #define RGBLIGHT_VAL_STEP 8
--- a/keyboards/salicylic_acid3/7skb/rev1/config.h
+++ b/keyboards/salicylic_acid3/7skb/rev1/config.h
@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifndef RGBLED_NUM
  #define RGBLED_NUM 12
-  #define RGBLIGHT_SPLIT
 #endif

 #define RGBLIGHT_EFFECT_BREATHING
--- a/keyboards/salicylic_acid3/7splus/config.h
+++ b/keyboards/salicylic_acid3/7splus/config.h
@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifndef RGBLED_NUM
  #define RGBLED_NUM 31
-  #define RGBLIGHT_SPLIT
 #endif

 #define RGBLIGHT_EFFECT_BREATHING
--- a/keyboards/salicylic_acid3/ergoarrows/config.h
+++ b/keyboards/salicylic_acid3/ergoarrows/config.h
@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifndef RGBLED_NUM
  #define RGBLED_NUM 86
-  #define RGBLIGHT_SPLIT
 #endif

 #define RGBLIGHT_EFFECT_BREATHING
--- a/keyboards/salicylic_acid3/jisplit89/rev1/config.h
+++ b/keyboards/salicylic_acid3/jisplit89/rev1/config.h
@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifndef RGBLED_NUM
  #define RGBLED_NUM 32
-  #define RGBLIGHT_SPLIT
 #endif

 #define RGBLIGHT_EFFECT_BREATHING
--- a/keyboards/salicylic_acid3/nknl7en/config.h
+++ b/keyboards/salicylic_acid3/nknl7en/config.h
@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifndef RGBLED_NUM
  #define RGBLED_NUM 21
-  #define RGBLIGHT_SPLIT
 #endif

 #define RGBLIGHT_EFFECT_BREATHING
--- a/keyboards/salicylic_acid3/nknl7jp/config.h
+++ b/keyboards/salicylic_acid3/nknl7jp/config.h
@ -26,7 +26,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #ifndef RGBLED_NUM
  #define RGBLED_NUM 20
-  #define RGBLIGHT_SPLIT
 #endif

 #define RGBLIGHT_EFFECT_BREATHING
--- a/keyboards/silverbullet44/config.h
+++ b/keyboards/silverbullet44/config.h
@ -19,7 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #define MASTER_RIGHT

-  //#define RGBLIGHT_SPLIT
  #define RGBLED_NUM 52
  #ifdef RGB_MATRIX_ENABLE
    #define RGB_MATRIX_LED_COUNT 52
--- a/keyboards/viktus/sp_mini/config.h
+++ b/keyboards/viktus/sp_mini/config.h
@ -35,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE

-//#define RGBLIGHT_SPLIT
 #define RGBLED_NUM 24    // Number of LEDs

 /*
--- a/keyboards/yoichiro/lunakey_mini/config.h
+++ b/keyboards/yoichiro/lunakey_mini/config.h
@ -18,7 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once

  #define RGBLED_NUM 12
-  #define RGBLIGHT_SPLIT
  #define RGBLIGHT_HUE_STEP 8
  #define RGBLIGHT_SAT_STEP 8
  #define RGBLIGHT_VAL_STEP 8