keyboard/qmk-keychron-q3-colemak-dh
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
vial
qmk-keychron-q3-colemak-dh/docs/ChangeLog/20240225.md
Ryan 78a0adfbb4
[docs] Organize driver & feature docs into subfolders (#23848) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2024-06-02 12:42:24 +10:00

30 KiB
Raw Permalink Blame History

QMK Breaking Changes - 2024 February 25 Changelog

Notable Features

0.24.0 is mainly a maintenance release of QMK Firmware -- as per last few breaking changes cycles, there have been a lot of behind-the-scenes changes, mainly:

  • continued purge of user keymaps
  • migration of RGB matrix configuration into info.json files
  • standardisation of LAYOUT naming
  • keyboard relocations
  • addressing technical debt

Changes Requiring User Action

Windows Driver Changes (QMK Toolbox 0.3.0 Release)

Flashing keyboards that target atmel-dfu or qmk-dfu on Windows using qmk flash or QMK Toolbox have traditionally used libusb for access to the DFU USB device. Since QMK Toolbox 0.3.0, this has changed to WinUSB.

If you update QMK Toolbox or update QMK MSYS, you may find that flashing Atmel DFU keyboards no longer functions as intended. If you strike such issues when flashing new firmware, you will need to replace the libusb driver with WinUSB using Zadig. You can follow the Recovering from Installation to Wrong Device instructions to replace the driver associated with the Atmel DFU bootloader, skipping the section about removal as Zadig will safely replace the driver instead. Please ensure your keyboard is in bootloader mode and has libusb as the existing driver before attempting to use Zadig to replace the driver. If instead you see HidUsb you're not in bootloader mode and should not continue with driver replacement.

Updated Keyboard Codebases

One note with updated keyboard names -- historical keyboard names are still considered valid when using External Userspace for builds. If you're already using External Userspace, you do not need to move your keymap inside your repository.

Old Keyboard Name New Keyboard Name
enter67 kezewa/enter67
enter80 kezewa/enter80
epoch80 kbdfans/epoch80
eu_isolation p3d/eu_isolation
flygone60/rev3 shandoncodes/flygone60/rev3
hub16 joshajohnson/hub16
hub20 joshajohnson/hub20
jm60 kbdfans/jm60
kira75 kira/kira75
kira80 kira/kira80
kmac kbdmania/kmac
kmac_pad kbdmania/kmac_pad
kudox/columner kumaokobo/kudox/columner
kudox/rev1 kumaokobo/kudox/rev1
kudox/rev2 kumaokobo/kudox/rev2
kudox/rev3 kumaokobo/kudox/rev3
kudox_full/rev1 kumaokobo/kudox_full/rev1
kudox_game kumaokobo/kudox_game
kudox_game/rev1 kumaokobo/kudox_game/rev1
kudox_game/rev2 kumaokobo/kudox_game/rev2
laser_ninja/pumpkin_pad laser_ninja/pumpkinpad
late9/rev1 rookiebwoy/late9/rev1
lefty smoll/lefty
lefty/rev1 smoll/lefty/rev1
lefty/rev2 smoll/lefty/rev2
lpad laneware/lpad
lw67 laneware/lw67
lw75 laneware/lw75
macro1 laneware/macro1
macro3 handwired/macro3
miniaxe kagizaraya/miniaxe
mino/hotswap shandoncodes/mino/hotswap
mino_plus/hotswap shandoncodes/mino_plus/hotswap
mino_plus/soldered shandoncodes/mino_plus/soldered
mnk1800s monokei/mnk1800s
mnk50 monokei/mnk50
mnk75 monokei/mnk75
moonlander zsa/moonlander
neopad/rev1 rookiebwoy/neopad/rev1
pico/65keys kumaokobo/pico/65keys
pico/70keys kumaokobo/pico/70keys
pw88 smoll/pw88
q4z p3d/q4z
raindrop laneware/raindrop
redox_w redox/wireless
riot_pad shandoncodes/riot_pad
spacey p3d/spacey
synapse p3d/synapse
tw40 p3d/tw40
w1_at geonworks/w1_at
z12 zigotica/z12
z34 zigotica/z34

Notable core changes

Renaming Arduino-style GPIO pin functions (#23085, #23093)

QMK has long used Arduino-style GPIO naming conventions. This has been confusing for users, as over time they've had new variations added, as well as users mistakenly thinking that QMK supports the rest of the Arduino ecosystem.

The decision was made to rename the GPIO manipulation functions with ones matching QMK Firmware's code styling.

Old New
setPinInput(pin) gpio_set_pin_input(pin)
setPinInputHigh(pin) gpio_set_pin_input_high(pin)
setPinInputLow(pin) gpio_set_pin_input_low(pin)
setPinOutput(pin) gpio_set_pin_output(pin)
setPinOutputPushPull(pin) gpio_set_pin_output_push_pull(pin)
setPinOutputOpenDrain(pin) gpio_set_pin_output_open_drain(pin)
writePinHigh(pin) gpio_write_pin_high(pin)
writePinLow(pin) gpio_write_pin_low(pin)
writePin(pin, level) gpio_write_pin(pin, level)
readPin(pin) gpio_read_pin(pin)
togglePin(pin) gpio_toggle_pin(pin)

I2C driver API Changes (#22905)

Much like the GPIO refactoring, I2C APIs were also updated to conform to QMK naming standards. This is largely irrelevant to people using subsystem abstractions such as touchpads or RGB lighting, and only affects people manually communicating with other peripherals.

Old API New API
i2c_readReg() i2c_read_register()
i2c_readReg16() i2c_read_register16()
i2c_writeReg() i2c_write_register()
i2c_writeReg16() i2c_write_register16()

Renaming Bootmagic Lite => Bootmagic (#22970, #22979)

Bootmagic "Lite" had no real meaning once the historical Bootmagic "Full" was deprecated and removed. Any references to Bootmagic Lite should now just refer to Bootmagic. We hope we got the majority of the code and the documentation, so if you find any more, let us know!

Threshold for automatic mouse layer activation (#21398)

In some cases, accidental automatic activation of the mouse layer made it difficult to continue typing, such as when brushing across a trackball. AUTO_MOUSE_THRESHOLD is now a configurable option in config.h which allows for specifying what the movement threshold is before automatically activating the mouse layer.

DIP Switch Mapping (#22543)

Much like Encoder Mapping, DIP Switch Mapping allows for specifying a table of actions to execute when a DIP switch state changes. See the DIP Switch Documentation for more information.

#if defined(DIP_SWITCH_MAP_ENABLE)
const uint16_t PROGMEM dip_switch_map[NUM_DIP_SWITCHES][NUM_DIP_STATES] = {
    DIP_SWITCH_OFF_ON(DF(0), DF(1)),
    DIP_SWITCH_OFF_ON(EC_NORM, EC_SWAP)
};
#endif

Quantum Painter updates (#18521, #20645, #22358)

Quantum Painter picked up support for the following:

  • ILI9486 displays
  • SSD1306 displays, including smaller OLEDs
  • Native panel pixel format support for fonts

Quantum Painter now supports the majority of common OLED panels supported by the basic OLED driver, so if you're using an ARM-based board you may find Quantum Painter a much more feature-rich API in comparison.

Full changelist

Core:

  • [Driver] ILI9486 on Quantum Painter (#18521)
  • Insert delay between shifted chars in send_string_with_delay (#19280)
  • [QP] Native palette support for fonts (#20645)
  • I2C driver cleanup (#21273)
  • Add option for auto mouse movement threshold (#21398)
  • Add Canadian French input locale (#21456)
  • Add encoder abstraction. (#21548)
  • Converted RGB matrix to use last_input_activity_elapsed(). (#21687)
  • Ignore space cadet key release when caps word is active (#21721)
  • Add OS detection callbacks (#21777)
  • joystick weights (#21883)
  • Add RGB matrix & LED Matrix support for IS31FL3729 (#21944)
  • dac_additive: Decouple the buffer length from the waveform length (#22276)
  • Add missing rgb matrix default parameters (#22281)
  • Remove console out endpoint (#22304)
  • Add ADC support STM32L4xx and STM32G4xx series MCUs (#22341)
  • Add QP support for smaller OLED displays and SSD1306 (#22358)
  • Add Imera converter (#22419)
  • LED drivers: refactor page selection (#22518)
  • Rework RGBLight driver system (#22529)
  • Add APA102_LED_COUNT define (#22530)
  • Add latam spanish headers (#22542)
  • Keymap introspection for Dip Switches (#22543)
  • Add basic presence check for cirque trackpad. (#22546)
  • Rename RGBLED_NUM -> RGBLIGHT_LED_COUNT (#22570)
  • LED drivers: change "TWI" to "I2C" (#22617)
  • LED drivers: extract IS31FL3742A from IS31COMMON (#22620)
  • Align Dip Switch feature (#22625)
  • LED/RGB Matrix: add header for drivers (#22628)
  • LED drivers: extract IS31FL3743A from IS31COMMON (#22635)
  • LED drivers: extract IS31FL3745 from IS31COMMON (#22636)
  • LED drivers: extract IS31FL3746A from IS31COMMON (#22637)
  • Update keyboard LED driver configs (#22638)
  • Solid reactive: improve fading effect (#22656)
  • Remove redundant RGB/LED matrix eeconfig init (#22673)
  • Remove redundant rgblight eeconfig init (#22674)
  • Remove redundant steno eeconfig init (#22680)
  • Rename LED_DISABLE_WHEN_USB_SUSPENDED -> LED_MATRIX_SLEEP (#22681)
  • Rename RGB_DISABLE_WHEN_USB_SUSPENDED -> RGB_MATRIX_SLEEP (#22682)
  • Align VUSB suspend protocol logic (#22688)
  • [Audio] Enable Complementary output for PWM Hardware driver (#22726)
  • Remove redundant audio eeconfig init (#22736)
  • Align location of tap dance keycode (#22742)
  • Align SPLIT_HAND_MATRIX_GRID left/right logic with SPLIT_HAND_PIN (#22775)
  • [CI] Regenerate Files (#22795)
  • Remove IS31FLCOMMON code (#22800)
  • Cirque reachable calibration aide (#22803)
  • LED drivers: rename "simple" to "mono" (#22814)
  • is31fl3733: change write_register() return type to void (#22824)
  • snled27351: change write_register() return type to void (#22825)
  • apa102: cleanups (#22826)
  • Remove PWM advanced check for WS2812 driver (#22830)
  • Allow ChibiOS SIO driver for UART driver (#22839)
  • LED drivers: more formatting (#22865)
  • LED drivers: change write_pwm_buffer() return type to void (#22869)
  • [CI] Regenerate Files (#22872)
  • LED drivers: switch to i2c_writeReg() (#22878)
  • LED drivers: remove write_pwm_buffer() from public API (#22884)
  • i2c: rename read/write register functions (#22905)
  • LED drivers: update I2C API usage (#22951)
  • LED drivers: create structs to hold PWM/scaling buffers (#22955)
  • Migrate and remove deprecated debug utils (#22961)
  • Remove call to removed i2c function in azoteq driver (#22966)
  • Tidy up print/debug logging headers (#22969)
  • Begin removal of bootmagic lite terminology (#22970)
  • LED drivers: place I2C addresses into an array (#22975)
  • Removal of bootmagic lite terminology (#22979)
  • Init pins for Analog Joystick sensor (#22985)
  • Workaround for G431 eeprom emulation (#23002)
  • is31fl3741: split PWM and scaling buffers (#23049)
  • LED drivers: update PWM register defines for g_<driver>_leds (#23052)
  • LED drivers: add support for shutdown pin (#23058)
  • AW20216S: combine EN pin defines (#23067)
  • Update naming convention for GPIO control macros (#23085)
  • Update GPIO macro usages in core (#23093)
  • OS Detection - Entire file should not be wrapped with ifdef (#23108)
  • IS31FL3729 updates (#23109)
  • Nix shell updates (Nixpkgs 2024-02-23, QMK CLI 1.1.5) (#23143)

CLI:

  • [Refactor] qmk find (#21096)
  • [Refactor] Break QGFImageFile's _save function into smaller pieces (#21124)
  • [Enhancement] Prepare for SyntaxWarning (#22562)
  • Flag invalid keyboard features during lint (#22832)

Submodule updates:

  • chore(chibios-contrib): sync with chibios-21.11.x (#22560)

Keyboards:

  • Move redox_w into redox (#21448)
  • null ST110R2.1 (SaikouType) basic support with layouts (#21623)
  • New keyboard addition: Orthograph (#21770)
  • Add Olly JF Rev.2 (#21775)
  • Cleanup Satisfaction75 Firmware and add new revisions (#22082)
  • Migrate dynamic_keymap.layer_count < 4 where requried (#22091)
  • Bastard Keyboards: Add support for Dilemma v2 (3x5+3) (#22185)
  • Karn: correct layout data (#22201)
  • zk3mod : added OLED (#22303)
  • Adds support for the Iron180 V2 PCBs (#22314)
  • Add 5x13 and 6x13 ortho community layouts (#22315)
  • Cipulot refactoring (#22368)
  • Remove era/klein (#22384)
  • consolidate firmware folder in smoll parent folder (#22401)
  • keycapsss/plaid_pad: switch to encoder map (#22474)
  • Add EE-AT and move W1-AT under geonworks (#22526)
  • refactor: projectcain/vault35 (#22558)
  • Update Q5 (#22575)
  • Update Q7 (#22577)
  • Update Q8 (#22578)
  • Update Q9 (#22579)
  • Remove "empty" files (#22603)
  • Rename Pumpkin Pad to Pumkinpad (#22651)
  • Noodlepad Additions and Updates (#22701)
  • Refactor: move miniaxe into kagizaraya (#22708)
  • Refactor: move keyboards into zigotica folder (#22709)
  • Refactor: move keyboards into laneware folder (#22710)
  • Refactor: move keyboards into kezewa (#22712)
  • Refactor: move keyboards into kbdmania folder (#22714)
  • Refactor: move keyboards into monokei folder (#22715)
  • Refactor: move keyboards into kumaokobo (#22719)
  • Updating NCC1701KB and adding via support (#22721)
  • Move Moonlander to ZSA folder (#22740)
  • Refactor: group shandoncodes keyboards (#22743)
  • Refactor: group rookiebwoy keyboards (#22745)
  • Default folder correction for kumaokobo (#22750)
  • Default folder correction for rookiebwoy (#22753)
  • Refactor: move macro3 into handwired folder (#22759)
  • Refactor: group kira keyboards (#22760)
  • Refactor: group hub keyboards (#22762)
  • Refactor: move p3d keyboards (#22763)
  • Refactor: group kbdfans keyboards (#22764)
  • Remove incorrect use of WS2812_PIO_USE_PIO1 (#22771)
  • Migrate LED Matrix config to info.json (#22792)
  • Migrate RGB Matrix config to info.json - [0-9] (#22797)
  • Migrate RGB Matrix config to info.json - A (#22798)
  • Late9 keymaps update, added VIA support (#22801)
  • Migrate RGB Matrix config to info.json - B (#22806)
  • Migrate RGB Matrix config to info.json - C (#22807)
  • Migrate RGB Matrix config to info.json - EF (#22808)
  • Migrate RGB Matrix config to info.json - D (#22811)
  • H87g2 updates (#22819)
  • WT boards: extract g_is31fl3736_leds from wt_mono_backlight (#22823)
  • Migrate RGB Matrix config to info.json - G (#22859)
  • Use existing columns for 3x5 layout (#22860)
  • Migrate RGB Matrix config to info.json - H (#22861)
  • Migrate RGB Matrix config to info.json - J (#22862)
  • Migrate RGB Matrix config to info.json - I (#22863)
  • Migrate RGB Matrix config to info.json - L (#22864)
  • Migrate RGB Matrix config to info.json - NOPQ (#22866)
  • Migrate RGB Matrix config to info.json - XZY (#22879)
  • Zed65/no_backlight/cor65 correct data layout (#22898)
  • Migrate RGB Matrix config to info.json - M (#22908)
  • Migrate RGB Matrix config to info.json - RS (#22909)
  • Migrate RGB Matrix config to info.json - TUVW (#22910)
  • Migrate RGB Matrix config to info.json - K (#22911)
  • Remove LAYOUTS_HAS_RGB (#22917)
  • Migrate lighting defaults to info.json (#22920)
  • Ensure LTO is enabled as a info.json build config option (#22932)
  • refactor(keyboard): quokka (#22942)
  • Sango Keyboard (#22971)
  • Add FS streampad (#22991)
  • Remove always enabled effects from lighting animation list (#22992)
  • Migrate RGB Matrix config to info.json - keychron (#22998)
  • Migrate RGB Matrix config to info.json - Misc (#23000)
  • Remove ee_hands config from ferris/sweep firmware (#23029)
  • Migrate dip switch config to info.json - keychron (#23037)
  • [unicorne] Add a layout alias (#23056)
  • nacly/sodium62: Update vid, pid, and add via keymap (#23063)
  • LED drivers: update keyboard LED configs (#23073)
  • Remove invalid keyboard level features (#23074)
  • Migrate WEAR_LEVELING_* to info.json (#23077)
  • [Keymap Removal] keyboard with most keymaps (#23081)
  • Remove obvious user keymaps, keyboards/{v,x,y,z}* edition. (#23083)
  • Remove obvious user keymaps, keyboards/{s,t}* edition. (#23084)
  • [Keymap Removal] keyboard with most keymaps (#23092)
  • Fiuxup takashicompany/heavy_left (#23094)
  • Remove obvious user keymaps, keyboards/{i,j,k}* edition (#23102)
  • Manual user keymap removal (#23104)
  • Manual user keymap removal (#23119)
  • Migrate RGBLED_NUM -> RGBLIGHT_LED_COUNT in remaining non-user keymaps (#23128)

Keyboard fixes:

  • Fix VID and PID for AnnePro2 (#22263)
  • fix(kikoslab/kl90): Fix firmware to support encoder knobs properly (#22649)
  • fix: improper usage of keyboard/user-level functions (#22652)
  • Temporary fix for mechlovin/olly/octagon (#22796)
  • Keychron Q11 usb poweron fix (#22799)
  • capsunlocked/cu80/v2: Fix invalid RGB matrix config (#22873)
  • Fix typo in Redox config (#22899)
  • Fixup doio/kb16 (#22921)
  • Fixup takashicompany/minizone (#22922)
  • Fixup sofle (#22934)
  • Fix Issue with RGB Matrix not understanding the split keyboard (#22997)
  • Fixup sawnsprojects/krush60 (#23095)
  • Fixup kbd67/rev1 (#23096)
  • Fixup boardsource/equals (#23106)
  • Fixup inett_studio/sq80 (#23121)
  • Add LED/RGB Matrix drivers to info.json schema (#23127)
  • Fix for multiple AMUX usage (#23155)

Bugs:

  • MIDI sustain effect fix on qmk 0.22.2 (#22114)
  • Prevent qmk migrate processing unparsed info.json values (#22374)
  • Remove redundant backlight eeconfig init (#22675)
  • pointing_device ifdef indentation fix (#22802)
  • Ensure LED config is extracted when feature is disabled (#22809)
  • Generate true/false for _DEFAULT_ON options (#22829)
  • is31fl3733: fix driver sync backwards compatibility defines (#22851)
  • LED drivers: misc formatting and typos (#22857)
  • Allow generation of both LED and RGB Matrix config (#22896)
  • LED drivers: remove PWM register offsets (#22897)
  • qmk format-json: Force Unix line endings and ensure LF at EOF (#22901)
  • Fix cirque connected check (#22948)
  • Fix joystick initialization (#22953)
  • Workaround for make test:all DEBUG=1 (#23047)
  • Fix unit test execution (#23048)
  • Fix git-submodule running in wrong location (#23059)
  • WS2812 bitbang: prefix for NOP_FUDGE define (#23110)
  • Fix make clean test:os_detection (#23112)
  • Fix pmw33xx sensor corruption on get-cpi call (#23116)
  • Ensure qmk generate-compilation-database copies to userspace as well. (#23129)