37 lines
1.9 KiB
Markdown
37 lines
1.9 KiB
Markdown
# snes_macropad
|
|
|
|
|
|
*Completed Build*
|
|
|
|
|
|
*Completed Build, closer with RGB off*
|
|
|
|
|
|
*PCB and FR4 top/bottom plates*
|
|
|
|
The SNES Macropad is, as it sounds, a macropad that features a SNES connector. In addition it has a qwiic connector and a 3.5mm jack for 3.3V I2C (not audio), allowing additional expansion.
|
|
|
|
This QMK implementation exposes the SNES controller as a part of the keyboard, meaning you can map the controller to do anything a qmk keyboard can. The layout is thus a 4x6 keyboard logically, split with the 3 first rows being on the macro pad and the 3 following being buttons on the snes controller.
|
|
|
|
* Keyboard Maintainer: [JBarberU](https://github.com/jbarberu)
|
|
* Hardware Supported: SNES Macropad Rev 1, with a Raspberry Pi Pico Lite (AliExpress clone of Raspberry Pico with fewer grounds and all GPIO's exposed on the headers)
|
|
* Hardware Availability: The SNES Macro pad can be found [here](https://www.tindie.com/products/jbarberu/snes-macropad/) either as a kit, partially built or fully built.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make snes_macropad:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make snes_macropad:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Physical bootsel button**: Hold down the bootsel button on the RPi Pico while plugging in the keyboard, or while pressing the reset button
|
|
* **Physical reset button**: Quickly double press the reset button
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|