keyboard/qmk-keychron-q3-colemak-dh
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
0b410ffd77
qmk-keychron-q3-colemak-dh/keyboards/argo_works/ishi/80/mk0_avr/readme.md

1.3 KiB
Raw Blame History

Ishi 80 Mk 0

argo_works/ishi/80/mk0_avr

Ishi 80 is a 60% keyboard with a SouthPaw, Mirrored Numpad.

Note: This firmware is for ATMega32U4 based daughterboards with the standard Pro-Micro footprint. It does not support the Encoder and OLED display functionality.

  • Keyboard Maintainer: Jason Devadoss
  • Hardware Supported: Ishi80 Mk 0 with standard Pro Micro footprint daughterboards
  • Hardware Availability: -

Make example for this keyboard (after setting up your build environment):

make argo_works/ishi/80/mk0_avr:default

Flashing example for this keyboard:

make argo_works/ishi/80/mk0_avr:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available