75b49aff56
* Add digitizer HID interface for setting the mouse cursor position at absolute screen coordinates. Tested on Pro Micro, Proton C and Blackpill. * Update docs/feature_digitizer.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-authored-by: Ryan <fauxpark@gmail.com> * Add missing copyrights Add V-USB support * Add support for digitizer dedicated endpoint for lufa and chibios. Fix formatting issues Move digitizer_task definition to the feature's base implementation file * Run cformat on modified files * Change digitizer report usage to Digitizer instead of Pen to avoid pointer disappearing on Windows. * Update tmk_core/protocol/vusb/vusb.c Co-authored-by: Ryan <fauxpark@gmail.com> * Run cformat from docker image * Remove send_digitizer from host_driver_t and instead rely on the declaration being the interface to the implementation in each HW-specific usb implementation. * Fix build : send_digitizer shouldn't be static in vusb and add weak-linkage implementation for tests without usb implementation * Change digitizer user interface to match pointing device's * Update documentation with new API Co-authored-by: a-chol <nothing@none.com> Co-authored-by: Ryan <fauxpark@gmail.com>
36 lines
1.4 KiB
Markdown
36 lines
1.4 KiB
Markdown
## Digitizer
|
|
|
|
The digitizer HID interface allows setting the mouse cursor position at absolute coordinates, unlike the Pointing Device feature that applies relative displacements.
|
|
|
|
To enable the digitizer interface, add the following line to your rules.mk:
|
|
|
|
```makefile
|
|
DIGITIZER_ENABLE = yes
|
|
```
|
|
|
|
In order to change the mouse cursor position from your keymap.c file, include the digitizer header :
|
|
|
|
```c
|
|
#include "digitizer.h"
|
|
```
|
|
|
|
This gives you access to the `digitizer` structure which members allow you to change the cursor position.
|
|
|
|
The coordinates are normalized, meaning there value must be set between 0 and 1. For the `x` coordinate, the value `0` is the leftmost position, whereas the value `1` is the rightmost position.
|
|
For the `y` coordinate, `0` is at the top and `1` at the bottom.
|
|
|
|
Here is an example setting the cursor in the middle of the screen:
|
|
|
|
```c
|
|
digitizer_t digitizer;
|
|
digitizer.x = 0.5;
|
|
digitizer.y = 0.5;
|
|
digitizer.tipswitch = 0;
|
|
digitizer.inrange = 1;
|
|
digitizer_set_report(digitizer);
|
|
```
|
|
|
|
The `tipswitch` member triggers what equates to a click when set to `1`. The `inrange` member is required for the change in coordinates to be taken. It can then be set to `0` in a new report to signal the end of the digitizer interaction, but it is not strictly required.
|
|
|
|
Once all members are set to the desired value, the `status` member needs its bitmask `DZ_UPDATED` to be set so the report is sent during the next main loop iteration.
|