39 lines
1.5 KiB
Markdown
39 lines
1.5 KiB
Markdown
# pi40
|
|
|
|
|
|
|
|
The pi40 is a 4x12 ortholinear keyboard with a fixed 2u spacebar using a Raspberry Pi Pico for the controller.
|
|
|
|
It includes options for a rotary encoder, SSD1306 oled, and per-key in-switch RGB LEDs.
|
|
|
|
All unused GPIO pins are broken out on the main pcb, as well as the available voltage pins.
|
|
|
|
This firmware also includes the option for VIA which includes configuration options for the rotary encoder, matrix lighting, and up to 10 layers.
|
|
|
|
Default oled configuration displays:
|
|
- current layer
|
|
- caps lock status
|
|
- num lock status
|
|
- scroll lock status
|
|
- current RGB lighting mode
|
|
|
|
* Keyboard Maintainer: [ziptyze](https://github.com/ziptyze)
|
|
* Hardware Availability: (https://1upkeyboards.com/shop/keyboard-kits/diy-40-kits/pi40-keyboard-kit/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make 1upkeyboards/pi40:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make 1upkeyboards/pi40:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 2 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix, the top left key, and plug in the keyboard
|
|
* **BOOTSEL button**: Hold down the BOOTSEL button on the pico, and plug in the keyboard
|