92873cc14f
Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
26 lines
1.0 KiB
Markdown
26 lines
1.0 KiB
Markdown
# Printed Pad
|
|
|
|
|
|
|
|
* Keyboard Maintainer: [noahbei](https://github.com/noahbei)
|
|
* Hardware Supported: STM32F072RBT6
|
|
* Hardware Availability: https://protadesigns.com/products/printed-pad
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make printedpad:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make printedpad:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|