f6bbd4d2c5
Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> Co-authored-by: jack <0x6a73@protonmail.com>
27 lines
1.1 KiB
Markdown
27 lines
1.1 KiB
Markdown
# Churrosoft Deck-8 (RGB Version)
|
|
|
|
|
|
|
|
A small 8-key macropad with RGB
|
|
|
|
* Keyboard Maintainer: [Polsaker](https://github.com/Polsaker)
|
|
* Hardware Supported: ChurroDeck PCV rev. 1b, 1c and 1d
|
|
* Hardware Availability: [churrosoft.ar](https://churrosoft.ar/deck)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make churrosoft/deck8/rgb:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make churrosoft/deck8/rgb:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
|
|
* **Physical reset button**: Short the `JP1` jumper in the back side of the PCB.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |