d7f352de98
* adding revision A * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update readme.md Adding instruction on how to enter bootloader * adding instruction on how to enter bootloader (DFU) adding instruction on how to enter bootloader (DFU) * updated description * Update keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/config.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/keymaps/default/keymap.c Co-authored-by: Nick Brassel <nick@tzarc.org> * Restoring palSetLineMode for working underglow I was experiencing the same issue as this: https://github.com/qmk/qmk_firmware/issues/12655#issuecomment-844104659 sigprof helped me resolve this issue. * Update rev_a.c removing palSetLineMode again, works great after rebase. Thanks! Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Nick Brassel <nick@tzarc.org>
20 lines
1.2 KiB
Markdown
20 lines
1.2 KiB
Markdown
# Viper/Eagle REP Rev A
|
|
|
|
A alternative PCB for Viper and Eagle V2 and V3
|
|
|
|
* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
|
|
* Hardware Supported: Viper/Eagle REP Rev A
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make 4pplet/eagle_viper_rep/rev_a:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
How to enter bootloader (DFU):
|
|
* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
|
|
* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
|
|
|
|
Alternative option if the firmware is already pre-flashed:
|
|
* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.
|