Encoders

Basic encoders are supported by adding this to your rules.mk:

ENCODER_ENABLE = yes

and this to your config.h:

#define NUMBER_OF_ENCODERS 1
#define ENCODERS_PAD_A { B12 }
#define ENCODERS_PAD_B { B13 }

Each PAD_A/B variable defines an array so multiple encoders can be defined, e.g.:

#define ENCODERS_PAD_A { encoder1a, encoder2a }
#define ENCODERS_PAD_B { encoder1b, encoder2b }

If your encoder's clockwise directions are incorrect, you can swap the A & B pad definitions.

Additionally, the resolution can be specified in the same file (the default & suggested is 4):

#define ENCODER_RESOLUTION 4

Callbacks

The callback functions can be inserted into your <keyboard>.c:

void encoder_update_kb(uint8_t index, bool clockwise) {
    encoder_update_user(index, clockwise);
}

or keymap.c:

void encoder_update_user(uint8_t index, bool clockwise) {
    if (index == 0) {
        if (clockwise) {
            register_code(KC_PGDN);
            unregister_code(KC_PGDN);
        } else {
            register_code(KC_PGUP);
            unregister_code(KC_PGUP);
        }
    }
}

Hardware

The A an B lines of the encoders should be wired directly to the MCU, and the C/common lines should be wired to ground.

1.3 KiB Raw Blame History

Encoders

Callbacks

Hardware

1.3 KiB

Raw Blame History