[Keyboard] Support for dumbpad_v3x (#18663 )

* feat: support for dumbpad_v3x

- all credit goes to
- ref: https://github.com/qmk/qmk_firmware/pull/16285

- included comment from noroadsleft
- ref: https://github.com/qmk/qmk_firmware/pull/16285#pullrequestreview-1038213899

* fix: add newline on every .c, .h, .mk files end

* feat: response to change https://github.com/qmk/qmk_firmware/pull/18663#discussion_r991515821

* feat: response to change https://github.com/qmk/qmk_firmware/pull/18663#discussion_r991516192

2022-10-12 15:19:07 -07:00

1.1 KiB

Raw Blame History

dumbpad v3.x - rgb & hotswap

A 4x4 numpad/macropad with a rotary encoder to the left of the bottom row of keys.

Keyboard Maintainer: imchipwood // deveth0
Hardware repository: dumbpad on github
PCB Revisions Supported: v3.1

Make example for this keyboard (after setting up your build environment):

make dumbpad/v3x:default

Flashing example for this keyboard:

make dumbpad/v3x:default:flash

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the encoder and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
Keycode in layout: Press the key mapped to RESET if it is available

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

1.1 KiB Raw Blame History

dumbpad v3.x - rgb & hotswap

Bootloader

1.1 KiB

Raw Blame History