qmk-keychron-q3-colemak-dh/docs/pr_checklist.md

PR checklists

This is a non-exhaustive checklist of what the QMK collaborators will be checking when reviewing submitted PRs.

If there are any inconsistencies with these recommendations, you're best off creating an issue against this document, or getting in touch with a QMK Collaborator on Discord.

General PRs

• PR should be submitted using a non-master branch on the source repository
  • This does not mean you target a different branch for your PR, rather that you're not working out of your own master branch
  • If submitter does use their own master branch, they'll be given a link to the "how to git" page after merging -- (end of this document will contain the contents of the message)
• Newly-added directories and filenames must be lowercase
  • This rule may be relaxed if upstream sources originally had uppercase characters (e.g. ChibiOS, or imported files from other repositories etc.)
  • If there is enough justification (i.e. consistency with existing core files etc.) this can be relaxed
    • a board designer naming their keyboard with uppercase letters is not enough justification
• Valid license headers on all *.c and *.h source files
  • GPL2/GPL3 recommended for consistency
  • Other licenses are permitted, however they must be GPL-compatible and must allow for redistribution. Using a different license will almost certainly delay a PR getting merged.
• QMK codebase "best practices" followed
  • This is not an exhaustive list, and will likely get amended as time goes by
  • #pragma once instead of #ifndef include guards in header files
  • No "old-school" GPIO/I2C/SPI functions used -- must use QMK abstractions unless justifiable (and laziness is not valid justification)
  • Timing abstractions should be followed too:
    • wait_ms() instead of _delay_ms() (remove #include <util/delay.h> too)
    • timer_read() and timer_read32() etc. -- see timer.h for the timing APIs
  • If you think a new abstraction is useful, you're encouraged to:
    • prototype it in your own keyboard until it's feature-complete
    • discuss it with QMK Collaborators on Discord
    • refactor it as a separate core change
    • remove your specific copy in your board

Core PRs

• Must now target develop branch, which will subsequently be merged back to master on the breaking changes timeline
• Other notes TBD
  • Core is a lot more subjective given the breadth of posted changes

Keyboard PRs

Closed PRs (for inspiration, previous sets of review comments will help you eliminate ping-pong of your own reviews): https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard

• info.json
  • valid URL
  • valid maintainer
  • displays correctly in Configurator (press Ctrl+Shift+I to preview local file, turn on fast input to verify ordering)
• readme.md
  • standard template should be present
  • flash command has :flash at end
  • valid hardware availability link (unless handwired) -- private groupbuys are okay, but one-off prototypes will be questioned. If open-source, a link to files should be provided.
• rules.mk
  • removed MIDI_ENABLE, FAUXCLICKY_ENABLE and HD44780_ENABLE
  • modified # Enable Bluetooth with the Adafruit EZ-Key HID -> # Enable Bluetooth
  • No (-/+size) comments related to enabling features
  • Remove the list of alternate bootloaders if one has been specified
  • No re-definitions of the default MCU parameters if same value, when compared to the equivalent MCU in mcu_selection.mk
• keyboard config.h
  • don't repeat MANUFACTURER in the PRODUCT value
  • no #define DESCRIPTION
  • no Magic Key Options, MIDI Options or HD44780 configuration
  • user preference configurable #defines need to be moved to keymap config.h
  • "DEBOUNCE" instead of "DEBOUNCING_DELAY"
  • bare minimum required code for a board to boot into QMK should be present
    • initialisation code for the matrix and critical devices
    • mirroring existing functionality of a commercial board (like custom keycodes and special animations etc.) should be handled through non-default keymaps
• keyboard.c
  • empty xxxx_xxxx_kb() or other weak-defined default implemented functions removed
  • commented-out functions removed too
  • matrix_init_board() etc. migrated to keyboard_pre_init_kb(), see: keyboard_pre_init*
  • prefer CUSTOM_MATRIX = lite if custom matrix used, allows for standard debounce, see custom matrix 'lite'
• keyboard.h
  • #include "quantum.h" appears at the top
  • LAYOUT macros should use standard definitions if applicable
    • Use the Community Layout macro names where they apply (preferred above LAYOUT/LAYOUT_all)
• keymap config.h
  • no duplication of rules.mk or config.h from keyboard
• keymaps/default/keymap.c
  • QMKBEST/QMKURL removed (sheesh)
  • If using MO(_LOWER) and MO(_RAISE) keycodes or equivalent, and the keymap has an adjust layer when holding both keys -- if the keymap has no "direct-to-adjust" keycode (such as MO(_ADJUST)) then you should prefer to write...

    layer_state_t layer_state_set_user(layer_state_t state) {
      return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
    }
    

    ...instead of manually handling layer_on(), update_tri_layer() inside the keymap's process_record_user().
• default (and via) keymaps should be "pristine"
  • bare minimum to be used as a "clean slate" for another user to develop their own user-specific keymap
  • standard layouts preferred in these keymaps, if possible
• submitters can have a personal (or bells-and-whistles) keymap showcasing capabilities in the same PR but it shouldn't be embedded in the 'default' keymap
• submitters can also have a "manufacturer-matching" keymap that mirrors existing functionality of the commercial product, if porting an existing board

Also, specific to ChibiOS:

• Strong preference to using existing ChibiOS board definitions.
  • A lot of the time, an equivalent Nucleo board can be used with a different flash size or slightly different model in the same family
    • Example: For an STM32L082KZ, given the similarity to an STM32L073RZ, you can use BOARD = ST_NUCLEO64_L073RZ in rules.mk
  • QMK is migrating to not having custom board definitions if at all possible, due to the ongoing maintenance burden when upgrading ChibiOS
• If a board definition is unavoidable, board.c must have a standard __early_init() (as per normal ChibiOS board defs) and an empty boardInit():
  • see Arm/ChibiOS early initialization
  • __early_init() should be replaced by either early_hardware_init_pre() or early_hardware_init_post() as appropriate
  • boardInit() should be migrated to board_init()

Keymap PRs

• #include QMK_KEYBOARD_H preferred to including specific board files
• Prefer layer enums to #defines
• Require custom keycode enums to #defines, first entry must have = SAFE_RANGE
• Terminating backslash (\) in lines of LAYOUT macro parameters is superfluous
• Some care with spacing (e.g., alignment on commas or first char of keycodes) makes for a much nicer-looking keymap

---

Notes

For when people use their own master branch, post this after merge:

For future reference, we recommend against committing to your `master` branch as you've done here, because pull requests from modified `master` branches can make it more difficult to keep your QMK fork updated. It is highly recommended for QMK development – regardless of what is being done or where – to keep your master updated, but **NEVER** commit to it. Instead, do all your changes in a branch (branches are basically free in Git) and issue PRs from your branches when you're developing.

There are instructions on how to keep your fork updated here:

[**Best Practices: Your Fork's Master: Update Often, Commit Never**](https://docs.qmk.fm/#/newbs_git_using_your_master_branch)

[Fixing Your Branch](https://docs.qmk.fm/#/newbs_git_resynchronize_a_branch) will walk you through fixing up your `master` branch moving forward. If you need any help with this just ask.

Thanks for contributing!