a08e4b5055
* add matrix_diagram.md * info.json: apply friendly formatting * add LAYOUT_tkl_f13_ansi_split_bs_rshift * add LAYOUT_tkl_f13_ansi * add LAYOUT_tkl_f13_ansi_tsangan_split_bs_rshift * add LAYOUT_tkl_f13_ansi_tsangan * add LAYOUT_tkl_f13_iso_split_bs_rshift * add LAYOUT_tkl_f13_iso * add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift * add LAYOUT_tkl_f13_iso_tsangan * enable Community Layout support * correct listed maintainer Maintainer has changed their GitHub username.
27 lines
1.0 KiB
Markdown
27 lines
1.0 KiB
Markdown
# CherryB Studio CB87RGB
|
|
|
|
|
|
|
|
A RGB TKL PCB including hotswap and solderable variant for CherryB Studio NEO87 and many compatible TKLs
|
|
|
|
* Keyboard Maintainer: [lunaticwhat](https://github.com/lunaticwhat)
|
|
* Hardware Supported: cb87rgb, atmega32u4
|
|
* Hardware Availability: [CherryB Studio](https://discord.gg/3gsCa8K)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make cherrybstudio/cb87rgb:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make cherrybstudio/cb87rgb:default:flash
|
|
|
|
## Accessing Bootloader Mode
|
|
|
|
To access Bootloader Mode, do one of the following:
|
|
|
|
* Tap the Reset switch mounted on the top side of the PCB to the left of the spacebar
|
|
* Hold the top left key of the keyboard while connecting the USB cable
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|