keyboard/qmk-keychron-q3-colemak-dh
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
abc101c122
qmk-keychron-q3-colemak-dh/keyboards/4pplet/waffling60/rev_e_ansi/readme.md
4pplet e82bc5355c
[Keyboard] Waffling60 Rev E ANSI Hotswap (#22270) 
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
2023-10-26 23:40:21 -07:00

1.5 KiB
Raw Blame History

waffling60 Rev. E ANSI

A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support. Revision E adds underglow and rotary encoder support.

More info: https://github.com/4pplet/waffling60

Make example for this keyboard (after setting up your build environment):

make 4pplet/waffling60/rev_e_ansi:default

Flashing example for this keyboard:

make 4pplet/waffling60/rev_e_ansi:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

How to enter bootloader (DFU):

  • Short the reset-header (labled BL/RESET) on the back of the PCB for about 2 seconds for the keyboard to enter DFU. When in DFU, it's ready to flash the firmware. If using a APM MCU it will not automatically reset after flash. Simply short the reset-header for a very short time to just reset the PCB, alternatively unplug and repluck the USB-cable to the keyboard.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.