35b329052c
* Initial Styrka Commit Initial commit of basic working firmware. - has basic 6.25u spacebar and fullsize backspace support in default keymap - has basic 6.25u spacebar and split backspace support in split_bs keymap - beginning work for via keymap (not complete) * Viktus Styrka Update 1 First edit update for Viktus Styrka - Corrected LAYOUT macros - Updated keymaps - Updated info.json to match LAYOUT macros - Added and updated VIA keymap - Added and updated ALL keymap - Removed unused features from config - Added more detailed board info to main readme * Update info.json Update info.json - missing end } * Update to files in initial commit As requested, changes made to: - styrka.c - rules.mk - split_bs/keymap.c - all/keymap.c - info.json - config.h * Update keyboards/viktus/styrka/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
24 lines
1.4 KiB
Markdown
24 lines
1.4 KiB
Markdown
# Viktus Styrka
|
|
|
|
|
|
|
|
The Viktus Styrka is a 65% + left macro block created in a collaboration of OneCreativeMind and BlindAssassin111 (Viktus owner). All design done by BlindAssassin111. The board supports ANSI and ISO modifiers as well as split backspace and stepped/non-stepped caps lock.
|
|
|
|
The PCB is an arm powered board utilizing the STM32F072CBT6 mcu. The PCB is designed to work with the universal daughterboard and a 4in (~100mm) 4 pin JST SR cable with reversed pinout (pin 1 of both connectors is the same wire etc.).
|
|
|
|
On the PCB is a single button for a reset for flashing. As well, there is a [Segger J-Link 6-pin Needle Adapter](https://www.segger.com/products/debug-probes/j-link/accessories/adapters/6-pin-needle-adapter/) footprint for reflashing the mcu as a backup in case of a bootloader issue.
|
|
|
|
* Keyboard Maintainer: [jrfhoutx](https://github.com/jrfhoutx), blindassassin111
|
|
* Hardware Supported: Styrka
|
|
* Hardware Availability: <https://www.Viktus.Design>
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make viktus/styrka:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make viktus/styrka:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|