5343eaf89a
* Adding led support for Plaid * Adding led support for Plaid * Update readme.md Fixing bad markdown * Adding my personal keymap * Clarifying LED instructions / formatting
36 lines
1.3 KiB
Markdown
36 lines
1.3 KiB
Markdown
# The default keymap for plaid
|
|
Original copyright 2019 Takuya Urakawa (dm9records.com)
|
|
LED Support added by Richard Sutherland (rich@brickbots.com)
|
|
|
|
This layout is based on the Planck layout, and includes an adjust layer (6)
|
|
accessible by holding the lower and raise modifiers (MO3 and MO4) together.
|
|
The adjustment layer is used to set the behavior of the two LEDs:
|
|
|
|
**Modifier Mode:**
|
|
Activates when any modifier (shift, alt, os, MO) key is held
|
|
down. LED turns off when key is release
|
|
|
|
**Blinkinlights Mode:**
|
|
Random chance of state change on each keystroke.
|
|
|
|
**Keypress Mode:**
|
|
On for any keypress as long as the key is pressed
|
|
|
|
**Carriage Mode:**
|
|
Turns on when enter is pressed, turns off when any next key is pressed
|
|
|
|
To set the behavior of an LED, and save it to eeprom, hold the
|
|
raise/lower keys together to access the adjust layer, then use
|
|
the keys indicated below to set the behaviors
|
|
|
|
* q = Toggle Red LED state, deactivates any other modes
|
|
* w = Toggle Green LED state, deactivates any other modes
|
|
* e = Set RED LED to modifier mode
|
|
* r = Set GREEN LED to modifier mode
|
|
* t = Set RED LED to Blinkinlights mode
|
|
* y = set GREEN LED to Blinkinlights mode
|
|
* u = set RED LED to Keypress mode
|
|
* i = set GREEN LED to Keypress mode
|
|
* o = set RED LED to Carriage mode
|
|
* p = set GREEN LED to Carriage mode
|