3.9 KiB
3.9 KiB
Bootmagic
Bootmagic Keycodes
Shortcuts for bootmagic options. You can use these even when bootmagic is off.
| Key | Aliases | Description |
|---|---|---|
MAGIC_SWAP_CONTROL_CAPSLOCK |
Swap Left Control and Caps Lock | |
MAGIC_CAPSLOCK_TO_CONTROL |
Treat Caps Lock as Control | |
MAGIC_SWAP_LALT_LGUI |
Swap Left Alt and GUI | |
MAGIC_SWAP_RALT_RGUI |
Swap Right Alt and GUI | |
MAGIC_NO_GUI |
Disable the GUI key | |
MAGIC_SWAP_GRAVE_ESC |
Swap ` and Escape |
|
MAGIC_SWAP_BACKSLASH_BACKSPACE |
Swap Backslash and Backspace | |
MAGIC_HOST_NKRO |
Force NKRO on | |
MAGIC_SWAP_ALT_GUI |
AG_SWAP |
Swap Alt and GUI on both sides |
MAGIC_UNSWAP_CONTROL_CAPSLOCK |
Unswap Left Control and Caps Lock | |
MAGIC_UNCAPSLOCK_TO_CONTROL |
Stop treating CapsLock as Control | |
MAGIC_UNSWAP_LALT_LGUI |
Unswap Left Alt and GUI | |
MAGIC_UNSWAP_RALT_RGUI |
Unswap Right Alt and GUI | |
MAGIC_UNNO_GUI |
Enable the GUI key | |
MAGIC_UNSWAP_GRAVE_ESC |
Unswap ` and Escape |
|
MAGIC_UNSWAP_BACKSLASH_BACKSPACE |
Unswap Backslash and Backspace | |
MAGIC_UNHOST_NKRO |
Force NKRO off | |
MAGIC_UNSWAP_ALT_GUI |
AG_NORM |
Unswap Left Alt and GUI |
MAGIC_TOGGLE_NKRO |
Turn NKRO on or off |
Bootmagc Hotkeys
Use this by holding the SPACEBAR and the documented key while
plugging in the USB connection. e.g. to get into bootloader mode
hold SPACE and B while plugging in USB.
| Key | Description |
|---|---|
ESC |
Skip bootmagic and saved eeprom configuration |
B |
Enter bootloader instead of firmware |
BACKSPACE |
Clear the saved settings from flash |
LCTRL |
Swap Control and Capslock and save into flash |
CAPSLOCK |
Swap Capslock and Control and save into flash |
LALT |
Swap Left Alt and GUI and save into flash, e.g. for OSX Opt and Cmd |
RALT |
Swap Right Alt and GUI and save into flash |
LGUI |
Disable GUI key - e.g. disable Windows key during gaming |
GRAVE |
Swap ' and ESC and save into flash |
BACKSLASH |
Swap Blackslash and Backspace and save into flash |
N |
Enable NKRO (N Key Roll Over) |
0 |
Make Layer 0 the default layer at bootup, e.g. switch to dvorak |
1 |
Make Layer 1 the default layer at bootup |
2 |
Make Layer 2 the default layer at bootup |
3 |
Make Layer 3 the default layer at bootup |
4 |
Make Layer 4 the default layer at bootup |
5 |
Make Layer 5 the default layer at bootup |
6 |
Make Layer 6 the default layer at bootup |
7 |
Make Layer 7 the default layer at bootup |