Files
beatglow/hardware/config.go
T
2026-10-29 17:28:51 +01:00

63 lines
1.0 KiB
Go

package hardware
import (
"periph.io/x/conn/v3/gpio"
"periph.io/x/conn/v3/i2c"
"periph.io/x/conn/v3/i2c/i2creg"
"periph.io/x/conn/v3/physic"
)
type I2CConfig struct {
// Bus name.
Bus string
// Reset is the reset pin.
Reset gpio.PinOut
// BL is the backlight pin.
BL gpio.PinOut
// Address is the I2C address.
Address uint16
// Frequency is the I2C bus frequency.
Frequency physic.Frequency
}
// Open the configured bus.
func (c I2CConfig) Open() (i2c.BusCloser, error) {
b, err := i2creg.Open(c.Bus)
if err != nil {
return nil, err
}
if c.Frequency != 0 {
if err := b.SetSpeed(c.Frequency); err != nil {
_ = b.Close()
return nil, err
}
}
return b, nil
}
type SPIConfig struct {
// Port is the SPI port name.
Port string
// Reset is the reset pin.
Reset gpio.PinOut
// CS is the chip select pin.
CS gpio.PinOut
// DC is the data/command pin.
DC gpio.PinOut
// BL is the backlight pin.
BL gpio.PinOut
// Frequency is the SPI bus frequency.
Frequency physic.Frequency
}