127 lines
3.4 KiB
Markdown
127 lines
3.4 KiB
Markdown
# BeatGlow
|
|
|
|
Visualizer for audiophile streamers (or enthousiasts alike).
|
|
|
|
## State of the project
|
|
|
|
Work in progress!
|
|
|
|
## Features
|
|
|
|
### Main display
|
|
|
|
Showing what track is currently playing.
|
|
|
|
Features:
|
|
- Audio format, bitrate and output sample rate display
|
|
- Track elapsed and duration
|
|
- Track album art
|
|
- Spectrum analyzer / Waterfall display of the track playing
|
|
|
|

|
|
|
|
### Settings
|
|
|
|
Live adjust settings from the rotary dail.
|
|
|
|

|
|
|
|
## Setup
|
|
|
|
Minimal requirements:
|
|
- Linux Computer (Raspberry Pi 3B+)
|
|
- Supported display
|
|
|
|
### Setup Raspberry Pi & SSD1322 256x64 OLED display
|
|
|
|
Requirements:
|
|
- Raspberry Pi 3B+/4B+
|
|
- SSD1322 OLED Display 3.12" 256x64
|
|
- Display purchase options:
|
|
- [AliExpress](https://s.click.aliexpress.com/e/_onJsYxJ) [^1]
|
|
- [AudioPhonics.fr](https://www.audiophonics.fr/en/screens-vu-meters/white-spi-iic-256x64-oled-312-screen-p-14604.html)
|
|
|
|
|
|
#### Wiring
|
|
|
|
Wiring the display is as follows, looking at the OLED display connector from the back (pin 1 on the top left, pin 16 on the bottom right):
|
|
|
|

|
|
|
|
| Wire | Function | Raspberry Pi | Display |
|
|
| -------------------------------- | --------- | --------------- | ------- |
|
|
|  | Ground | Pin 20 (GND) | Pin 1 |
|
|
|  | 3.3V | Pin 17 (3.3V) | Pin 2 |
|
|
|  | SPI Clock | Pin 23 (GPIO11) | Pin 4 |
|
|
|  | SPI Data | Pin 19 (GPIO10) | Pin 5 |
|
|
|  | SPI D/C | Pin 18 (GPIO24) | Pin 14 |
|
|
|  | SPI Reset | Pin 22 (GPIO25) | Pin 15 |
|
|
|  | SPI C/E | Pin 24 (GPIO8) | Pin 16 |
|
|
|
|
#### Configuration
|
|
|
|
The display configuration in `beatglow.conf` is as follows:
|
|
|
|
```ini
|
|
# Display hardware configuration.
|
|
display {
|
|
# Target frame rate, actual frame rate depends on hardware options.
|
|
fps = 25
|
|
|
|
# Main display is where all the magic happens.
|
|
main {
|
|
# Type of display
|
|
type = "ssd1322"
|
|
size = "256x64"
|
|
|
|
# Mode (spi or i2c)
|
|
mode = "spi"
|
|
|
|
# SPI settings
|
|
port = "spi0.0"
|
|
reset = "GPIO25"
|
|
dc = "GPIO24"
|
|
bl = "GPIO23"
|
|
}
|
|
}
|
|
```
|
|
|
|
### Setup Raspberry Pi & ST7789 170x320 IPS display
|
|
|
|
Requirements:
|
|
- Raspberry Pi 3B+/4B+
|
|
- ST7735/ST8889 IPS display
|
|
- Display purchase options:
|
|
- [AliExpress](https://s.click.aliexpress.com/e/_onuTZPb) [^1]
|
|
- [Waveshare](https://www.waveshare.com/1.9inch-lcd-module.htm)
|
|
|
|
#### Configuration
|
|
|
|
The display configuration in `beatglow.conf` is as follows:
|
|
|
|
```ini
|
|
|
|
display {
|
|
# Target frame rate, actual frame rate depends on hardware options.
|
|
fps = 25
|
|
|
|
# Main display is where all the magic happens.
|
|
main {
|
|
# Type of display
|
|
type = "st7789" # or st7735
|
|
size = "320x130"
|
|
rotate = "left"
|
|
|
|
# Mode (spi or i2c)
|
|
mode = "spi"
|
|
|
|
# SPI settings
|
|
port = "spi0.0"
|
|
reset = "GPIO25"
|
|
dc = "GPIO24"
|
|
bl = "GPIO23"
|
|
}
|
|
}
|
|
```
|
|
|
|
[^1]: Affiliate links, by clicking them and making an order there is a small kick back for me, which allows me to order parts for testing. There is usually no additional costs for the purchaser. |